基于动力学模型修正的螺纹连接结构建模

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (1781 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In the process of structural analysis of dynamics, the accuracy and efficiency are affected greatly by the model of screwed fittings. As to the complexity and precision deficiency of current models, a modeling solution for screwed fittings based on model updating was presented in which the bolts were simulated with rigidity elements. Firstly, according to the presented solution, an equivalent FE model of two shells connected by four screws was explored and the relationship between natural frequency and screw tightening torque was researched by modal tests. Then the stiffness parameters were updated based on the test results. The updating results show that the errors between calculated modal frequencies and the test ones are less than 2.5% in a large tightening torque scale. It is demonstrated that the presented modeling solution is feasible and effective.

Key words： screwed fittings modal updating modal test rigidity element tightening torque

Received: 24 September 2014 Published: 15 December 2015

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Ming-chao
	YANG Guang
	ZHANG Wei-guo
	BU Zhong-hong
	YANG Xiao-qiang
	HOU Jun-zhan
	GAO Yu

Cite this article:

WANG Ming-chao,YANG Guang,ZHANG Wei-guo, et al. Modeling for Bolt Connected Structure Based on Model Updating[J]. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(23): 161-165.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2015/V34/I23/161

[1] 赵猛，张以都，马良文，等. 装配结构模态仿真与实验对比研究 [J]. 振动与冲击，2005，24（1）:28-93.
Zhao Meng, Zhang Yidu, Ma Liangwen,et al. Research on modal analysis of assembly structures based on MSC/Nastran [J]. Journal of vibration and shock, 2005, 24(1): 28-93.
[2] 程来，宋言明，李贺，等. 基于等效接触区域的螺栓连接结构模态分析 [J]. 机械设计与研究，2012，28（2）：44-47.
Cheng Lai, Song Yanming, Li He, et al. Modal analysis based on the equivalent contact area of the structure with bolt connections [J]. Machine Design and Research, 2012, 28(2): 44-47.
[3] Jeong Kim，Joo-Cheol Yoon，Beom-Soo Kang. Finite element analysis and modeling of structure wih bolted joints [J]. Applied Mathematical Modeling. 2007,31:895-911.
[4] J.G Williams, R.E. Anley, D.H. Nash, et al. Analysis of externally loaded bolted joints: Analytical, computational and experimental study [J]. International Journal of Pressure Vessels and Piping, 2009, 89: 420-427.
[5] P.J. Gray, C.T. McCarthy. A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints [J]. Composites: Part B. 2010, 41:317-325.
[6] 薛闯，贾建军，舒嵘，等. 装配体结构有限元分析中的螺钉连接模型 [J]. 科学技术与工程，2006，6（7）：825-828.
Xue Chuang, Jia Jianjun, Shu Rong, et al. Bolted joint models of finite element assemblies [J]. Science Technology and Engineering, 2006, 6(7): 825-828.
[7] 王建民，郑常良.螺栓对接结构的非线性解析建模与分析[J].振动与冲击,2013,32(20):5-8.
WANG Jianmin, ZHENG Changliang. Nonlinear analytical modeling and analysis for bolted joint structures [J].Journal of Vibration and Shock,2013,32(20):5-8.
[8] 陈新，孙庆鸿，毛海军，等. 基于接触单元的磨床螺栓连接面有限元建模与模型修正[J]. 中国机械工程，2001，12（5）：524-526.
Chen Xin, Sun Qinghong, Mao haijun, et al. Modeling and correcting FEM with contact element for the combined surfaces of grinder bolts [J]. China Mechanical Engineering, 2001, 12(5): 524-526.
[9] 艾延廷，翟学，乔永利. 基于有限元法的螺栓连接结构的模态参数识别 [J]. 中国机械工程，2012，23（8）：957-960.
Ai Yanting, Zhai Xue, Qiao Yongli. Identification of Connected Structure Modals Based on FEM [J], China Mechanical Engineering, 2012, 23(5): 957-960.
[10] Feras Alkatan，Pierre Stephan Daidie , Jean Guilot. Equivalent axial stiffness of various components in bolted joints subjected to anial loading [J]. Finite Elements in Analysis and Design, 2007(43): 589-598.
[11] R. L Zadoks, D.P.R. Kokatam. Investigation of the axial stiffness of a bolt using a three-dimensional finite element [J]. Journal of Sound and Vibration, 2001(246): 349-373.
[12] 艾延廷，翟学，王志，等. 法向接触刚度对装配体振动模态影响的研究 [J]. 振动与冲击，2012，31（6）:171-174.
Ai Yanting, Zhai Xue, Wang Zhi, et al. Influences of normal contact stiffness on an assembly’s vibration modes [J]. Journal of Vibration and Shock. 2012, 31(6): 171-174.
[13] 朱安文，曲广吉，高耀南. 结构动力模型修正技术的发展[J]. 力学进展，2002，32（3）：337-348
Zhu Anwen, Qu Guangji, Gao Yaonan. A study of the modifying techniques of structure dynamic models [J]. Advances of Mechanics, 2002, 32(3): 337-348.
[14] 王超学，孔月萍，董丽丽,等.智能优化算法与应用[M]. 西安：西北大学出版社，2012.
Wang Chaoxue, Kong Yueping, Dong Lili, et al. Intelligent optimization algorithms and their applications [M]. Xi’an: Northwest University Press,2012.
[15] 史峰，王辉，郁磊，等. Matlab智能算法30个案例分析[M]. 北京：北京航空航天大学出版社，2011.
Shi feng, Wang Hui, Yulei, et al. 30 cases analysis of intelligent algorithm with Matlab [M]. Beijing: Beijing University Press, 2011.
[16] 丁泽慧，陈韶华. 基于退火遗传算法的少数投影CT图像重建 [J]. 应用光学，2006，27（6）：520-523.
Ding Zehui, Chen Shaohua. Image reconstruction for CT from fewer views based on simulated annealing genetic algorithm [J]. Journal of Applied Optics, 2006, 27(6): 520-523.