|
|
|
| Active control of slewing vibration in ultra-long flexible boom |
| HUANG Yi1,2，E Jia-qiang1，GUO Gang2，TANG Min-yan3,HU Wei2 |
1.The State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University，Changsha 410013，China;
2.National Engineering Research Center for Concrete Machinery，Zoomlion Heavy Industry Science & Technology Co.，Ltd.，Changsha 410013，China;
3.State Grid Changsha Power Supply Company,Changsha 410100,China |
|
|
|
Abstract Aiming at severe slewing vibration in ultra-long flexible boom，the mechanism identification and active control of the slewing vibration was considered. Firstly，The simplified dynamical model of slewing boom system was established based on the finite element method，and the slewing characteristics of the model was analyzed. Secondly，The active vibration control method is presented, which combining the algorithms of modal filtering and optimal pole assignment. Finally，The test platform based on NI instrument was implemented and the active vibration control experiment was carried out. The experimental results showed that the damping ratio of the controlled slewing system increase and the slewing vibration of boom tip decrease obviously，which validating the effectiveness of the proposed method.
|
|
Received: 10 June 2015
Published: 15 March 2016
|
|
|
|
[1] 欧进萍. 结构振动控制-主动、半主动和智能控制[M]. 北京: 科学出版社, 2003.
[2] 韩清鹏,于晓光,唐玲. 一种柔性机械臂旋转运动和振动的主动控制方法[J]. 机械科学与技术,2012,31(4)：685-688.
HAN Qing-peng, YU Xiao-guang,TANG Ling. An active control method for vibration and rotary motion of flexible manipulator[J]. Mechanical Science and Technology, 2012, 31(4)：685-688.
[3] 黄毅,郭岗,邝昊,等. 混凝土泵车臂架回转系统动力学分析及预测[J]. 机械强度,2014, 36(2): 300-304.
HUANG Yi, GUO Gang, KUANG Hao,et al. Dynamics analysis and prediction on boom slewing system of the concrete pump truck[J]. Journal of Mechanical Strength, 2014, 36(2): 300-304.
[4] Mohamed I, Matrins J M. Vibration control of a very flexible manipulator system[J]. Control Engineering Practice, 2005, 13(3):267-277.
[5] Zhicheng Q. Adaptive nonlinear vibration control of a cartesian flexible manipulator driven by a ballscrew mechanism[J]. Mechanical Systems and Signal Processing, 2012, 30: 248-266.
[6] Ho M T, Tu Y W. Position control of a single-link flexible manipulator using H∞-based PID control[J]. Control Theory and Applications, 2006, 153(5): 615-622.
[7] Nguyen V B, Morris A S. Using a genetic algorithm to fully optimise a fuzzy logic controller for a two-link-flexible robot arm[J]. Robotic, 2009, 27(5):677-687.
[8] 帅鑫,李艳君,吴铁军. 一种柔性机械臂末端轨迹跟踪的预测控制算法[J]. 浙江大学学报, 2010, 44(2):259-263.
SHUAI Xin, LI Yan-jun, WU Tie-jun. Realtime predictive control algorithm for endpoint trajectory tracking of flexible manipulator[J]. Journal of Zhejiang University, 2010, 44(2): 259-263.
[9] 欧阳慧珉,内山直树,佐野滋则,等.只利用旋臂旋转运动的起重机消摆控制[J].振动与冲击,2014,33(4):131-137.
OUYANG Hui-min,UCHIYAMA Naoki,SANO Shigenori,
et al. Load sway suppression control for rotary cranes using only horizontal boom motion[J].Journal of Vibration and Shock,2014,33(4):131-137.
|
|
|
|
