|
|
Simulation analysis of ultrasonic cavitation micro-jet impact with different angles based on CEL |
YE Lin-zheng, ZHU Xi-jing, WANG Jian-qing, ZHANG Le-lin |
North University of China, School of Mechanics and Power Engineering,Taiyuan,030051, China |
|
|
Abstract To explore changes of the wall characteristics under the impacting of the cavitation micro-jet with different angles in the ultrasonic honing, the Coupled Eulerian-Lagrangian(CEL) method was applied to establish the model of ultrasonic cavitation micro-jet impinging on a wall and conduct the numerical simulation. The results show: micro pits appear on the wall under the micro-jet impact, which maximum depth can reach 0.11 μm; The lateral jet velocity on the back side of the micro-jet is lower than that on the front side, and the pressure, pit depth and equivalent strain of the back side are all higher than that of the front side; With the increase of the impact angle, wall pressure, pit depth and equivalent strain are all first slightly increased and then decreased, especially the shock effect of micro-jet is the strongest at 15º. Much micro-jet impinging on the wall is advantageous to the material removal in the ultrasonic honing.
|
Received: 02 June 2015
Published: 15 August 2016
|
|
|
|
[1] 张敏,李晓谦,蒋日鹏,等. 超声辐射杆振幅分布与空蚀区域[J]. 振动与冲击,2014, 33(13): 59-62.
ZHANG Min, LI Xiao-qian, JIANG Ri-peng, et al. Amplitude distribution and cavitation corrosion field of ultrasonic transducer system [J]. Journal of Vibration and Shock, 2014, 33(13): 59-62.
[2] Brujan E A, Ikeda T, Matsumoto Y. On the pressure of cavitation bubbles [J]. Experimental Thermal and Fluid Science, 2008, 32(5): 1188-1191.
[3] 刘国东,祝锡晶,郭策. 功率超声珩磨磨削区空化声场的建模与仿真研究[J]. 声学学报,2013, 38(6): 663-668.
LIU Guo-dong, ZHU Xi-jing, GUO Ce. Research on modelling and simulation of cavitation sound field in the grinding zone of the power ultrasonic honing [J]. ACTA Acustica, 2013, 38(6): 663-668.
[4] Cook S S. Erosion by water-hammer [J]. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1928, 119(783): 481-488.
[5] 谢永慧,汪勇,陈建辉,等. 液固高速撞击下材料损伤机制的数值和实验研究[J]. 中国电机工程学报,2009 (35): 109-118.
XIE Yong-hui, WANG Yong, CHEN Jian-hui, et al. Numerical and Experimental Study on Mechanism of Material Damage by High Speed Liquid-solid Impact [J]. Proceedings of the CSEE, 2009, 35: 109-118.
[6] 孙龙泉,张忠宇,丁建军,等. 可压缩流体射流冲击平板的压力特性研究[J]. 振动与冲击,2013, 32(3): 178-181.
SUN Long-quan, ZHANG Zhong-yu, DING Jian-guo, et al. Pressure characteristics of panels subjected to collision of compressible jet [J]. Journal of Vibration and Shock, 2013, 32(3): 178-181.
[7] 施春燕,袁家虎,伍凡,等. 冲击角度对射流抛光中材料去除面形的影响分析[J]. 光学学报,2010, 30 (2): 513-517.
SHI Chun-yan, YUAN Jia-hu, WU Fan, et al. Influence analysis of impact angle on material removal profile in fluid jet polishing [J]. Acta Optica Sinica, 2010, 30(2): 513-517.
[8] 郭策,祝锡晶,王建青,等. 超声珩磨作用下两空化泡动力学特性[J]. 力学学报,2014, 46(6): 879-886.
GUO Ce, ZHU Xi-jing, WANG Jian-qing, et al. Dynamical behaviors of double cavitation bubbles under ultrasonic honing [J]. Chinese Journal of Theoretical and Applied Mechanics, 2014, 46(6): 879-886.
[9] 杜龙. 基于欧拉—拉格朗日方法的复合材料机翼前缘鸟撞模拟[J]. 振动与冲击,2012, 31(7): 137-141.
DU Long. Finite element analysis of bird striking on a composite wing leading edge based on eulerian-lagrangian method [J]. Journal of Vibration and Shock, 2012, 31(7): 137-141.
[10] Futakawa M, Naoe T, Kogawa H, et al. Micro-impact damage caused by mercury bubble collapse [J]. JSME International Journal Series A, 2005, 48(4): 234-239.
[11] 李晓杰,张程娇,王小红,等. 水的状态方程对水下爆炸影响的研究[J]. 工程力学,2014, 31(8): 46-52.
LI Xiao-jie, ZHANG Cheng-jiao, WANG Xiao-hong, et al. Numerical study on the effect of equations of state of water on underwater explosions [J]. Engineering mechanics, 2014, 31(8): 46-52.
[12] Hammitt. Mechanical Cavitation Damage Phenomena and Corrosion-fatigue [M]. Defense Technical Information Center, 1971.
[13] 祝锡晶. 功率超声振动珩磨技术的基础与应用研究[D]. 南京:南京航空航天大学,2007.
ZHU Xi-jing. Foundation Research and Application Technology of the Power-Ultrasonic-Vibration Honing [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.
[14] Islam M A, Farhat Z N, Ahmed E M. Influence of impact angle and velocity on erosion of AISI 1018 steel under jet impingement [J]. Proceedings of the 3rd Gas Processing Symposium, 2012, 3: 274-279.
[15] Hattori S, Kakuichi M. Effect of impact angle on liquid droplet impingement erosion [J]. Wear, 2013, 298: 1-7.
[16] Islam M A, Farhat Z N. Effect of impact angle and velocity on erosion of API X42 pipeline steel under high abrasive feed rate [J]. Wear, 2014, 311(1): 180-190.
|
|
|
|