|
|
|
| Harmonic Analysis of a Centrifugal Impeller with non-cyclic exciting forces |
| XIAO Jun1,2 ZHAO Yuanyang1,2 SHU Yue1,2 |
1. Hefei General Machinery Research Institute, National Key Laboratory of Compressor Technology, Hefei 230031；
2. Hefei General Environmental Control Technology Co., Ltd., Hefei 230031 |
|
|
|
Abstract In order to investigate the forced vibration problems of centrifugal impellers subjected to gas excitation in the flow fields, an algorithm to calculate the harmonic responses of impellers under non-cyclic exciting forces is realized using the cyclic model. The cyclic symmetry of structure is considered in the programming. For the spatially periodic inflow conditions, firstly the load vector is constructed according to the phase differences of periodic excitations among the sectors, and then by utilizing the modal shape data of different nodal diameters the harmonic response dynamic equations are established under the modal coordinate system to calculate the displacement response. Finally, the harmonic analyses of a radial impeller under non-cyclic aerodynamic exciting forces are carried out. The displacement response results obtained from the cyclic model agree well with those from the integral model. The responses under the exciting frequencies near two resonance points both show relatively higher amplitudes. All the results manifest the correctness of algorithm and its effectiveness to predict the resonance caused by gas excitation.
|
|
Received: 16 June 2015
Published: 25 November 2016
|
|
|
|
[1] Dickens J M. Numerical methods for dynamic substructure analysis [D]. Berkeley: University of California, 1980.
[2] Petrov E P. A method for use of cyclic symmetry properties in analysis of nonlinear multi-harmonic vibrations of bladed disks [J]. Journal of Turbomachinery, 2004, 126(1): 175-183.
[3] 李松涛, 许庆余, 张小龙. 透平机械离心压缩机和离心泵叶轮动力分析的三维旋转循环对称CN群算法 [J]. 应用力学学报, 2005, 22 (2): 169-174.
LI Songtao, XU Qingyu, ZHANG Xiaolong. Application of CN group cyclic symmetry method to three-dimensional dynamic analysis of centrifugal compressor and pump impeller [J]. Chinese Journal of Applied Mechanics, 2005, 22 (2): 169-174.
[4] Fridh J, Laumert B, Fransson T. Forced response in axial turbines under the influence of partial admission [R]. ASME Paper GT2012-68303, 2012.
[5] Bladh R, Zhuang Qingyuan, Hu Jiasen, Hammar J. Leakage-induced compressor blade excitation due to inter-segment gaps [R]. ASME Paper GT2012-70040, 2012.
[6] Dickmann H P, Wimmel T S, Szwedowicz J, Filsinger D, Rounder C H. Unsteady flow in a turbocharger centrifugal compressor: 3D-CFD-simulation and numerical and experimental analysis of impeller blade vibration [R]. ASME Paper GT2005-68235, 2005.
[7] White N, Laney S, Zorzi C. RCFA for recurring impeller failures in a 4.7 Mtpa LNG train propane compressor [C]. Proceedings of the Fortieth Turbomachinery Symposium, Houston, USA, 2011.
[8] 毛义军, 祁大同, 许庆余. 离心压缩机叶轮叶片疲劳断裂故障的数值分析 [J]. 西安交通大学学报, 2008, 42(11): 1336-1339.
MAO Yijun, QI Datong, XU Qingyu. Numerical study on high cycle fatigue failure of centrifugal compressor impeller blades [J]. Journal of Xi'an Jiaotong University, 2008, 42(11): 1336-1339.
[9] Polizzi E. A high-performance numerical library for solving eigenvalue problems [R]. FEAST Solver v2.0 User's Guide, 2012.
[10] Zemp A, Abhari R S, Ribi B. Experimental investigation of forced response impeller blade vibration in a centrifugal compressor with variable inlet guide vanes - Part 1: blade damping [C]. Proceedings of ASME Turbo Expo 2011, Vancouber, Canada, 2011.
|
|
|
|
