|
|
|
| Hysteresis performance research of the plate type variable friction damper with complex damping characteristics |
| PENG Ling-yun1，Chang Jian1，SU Jing-yu1，QIN Li2 |
1. Beijing University of Technology Beijing key Lab of Earthquake Engineering and Structural Retrofit Beijing 100124,China;
2.Hubei University of Arts and Science,Xiangyang441053,China |
|
|
|
Abstract A plate type variable friction damper is proposed in order to make the damping devices have complex damping characteristics. Based on static equilibrium conditions, the theoretical formulas of damper hysteretic model according to its geometric and physical parameters were derived. And the damper hysteretic curve was simulated using nonlinear finite element analysis. Some periodic static test on hysteretic behavior of the damper was conducted. The key parameters affecting the hysteresis performance based on the above methods were investigated. The results showed that hysteresis curves of the damper are symmetrical triangle about the origin and locate in first and third quadrants, Hysteresis curve of theoretical formulas and numerical simulation agreed very well with the experimental results, the key factors affecting the damper hysteretic performance are spring stiffness, two friction coefficients and one angle. It showed that the damper hysteresis curve has obviously complex damping characteristics, the results of theoretical formulas and numerical simulation of the hysteretic model can be used as a preliminary method to design this damper.
|
|
Received: 10 March 2016
Published: 15 September 2017
|
|
|
|
[1] 彭凌云，康迎杰，秦丽，等.风荷载作用下复阻尼TMD减振结构优化设计[J] 振动与冲击，2015，34（21）．
Peng Ling yun,Kang Ying Jie,Qin Li,et al. Optimal design for structures including TMDs with comlex stiffness and damping under wind loads. Journal of Vibration And Shock, 2015,34(21).
[2] GB50011-2010,建筑抗震设计规范[S].北京：中国建筑工业出版社,2010．
[3] 刘晶波，杜修力．结构动力学［M］．北京:机械工业出版社，2005．
[4] 克拉夫R，彭津J．结构动力学［M］．王光远，译．北京:高等教育出版社，2006．
[5] R W Clough.J Penzien Dynamics of structures［M］International Civil Engineering Consultants, Inc.1975．
[6] 王光远 建筑结构的振动［M］.北京：科学出版社, 1978.
[7] Xiyuan Zhou, Lingyun PENG.A new type of damper with friction-variable characteristics[J].Earthquake Engineering and Engineering Vibration,2010, 8(4):507-520．
[8] 彭凌云,周锡元.拟线性摩擦阻尼器性能试验与有限元分析[J].建筑结构学报,2010(6):194-200．
PENG Ling-yun, ZHOU Xi-yuan. Experiment and FEA on performance of pseudo-linear friction damper [J]. Journal of Building Structures, 2010(6):194-200．
[9] 彭凌云,周锡元,闫维明.管式变摩擦阻尼器的减震性能试验与数值模拟[J].振动与冲击,2012,31(5):19-23．
PENG Ling-yun, ZHOU Xi-yuan. YAN Wei-ming Test and numerical simulation for performance of a tubular type of variable friction damper [J]. Journal of Vibration And Shock, 2012,31(5):19-23．
[10] Nims. D K, Richter. P J. Bachman. R E. The Use Of The Energy Dissipating Restraint For Seismic Hazard Mitigation, Earthquake Spectra,1993 , 9(3):467~489．
[11]李惠，彭君义，周锡元，等．向心式变摩擦阻尼器控制结构地震反应分析[J]．地震工程与工程振动，2001，21(4):66~73.
LI Hui, PENG Jun yi, ZHOU Xi yuan et al. Seismic Response Analysis of Structures.With Energy Dissipating Restraint Earthquake Engineering and Engineering Vibration, 2001，21(4):66~73．
[12]彭凌云.向心式摩擦阻尼器的理论分析及应用研究[D]：北京：北京工业大学，2004．
[13] 林能辉 应用新型拟线性变摩擦滞回阻尼器的大跨度悬索桥地震响应分析与减震控制研究[D]：哈尔滨：中国地震局工程力学研究所，2011．
[14]Victor L Chun.影响模具弹簧寿命的关键因素-IEM模具弹簧启示[J].现代零部件.2004（Z3）:107~109．
Victor L Chun. The key factors affecting the service life of die springs-IEM die spring revelation [J] Modern Components,2004(Z3).107~109．
[15] 数字化手册编委会.机械设计手册（软件版）[M].2008．
|
|
|
|
