|
|
|
| Sound insulation performance of pyramidal hollow lattice structures |
| CHEN Ting-ting1,2 LIU Jie1,2 TAN Dong-guo1,2 WEN Gui-lin1,2 |
1. State Key Lab of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China;
2.College of Mechanical and Vehicle Engineering, Hunan University, ChangSha 410082, China） |
|
|
|
|
Abstract Periodic lattice structures applied in spacecrafts as a new type structure require considering both structural lightweight and excellent sound insulation performance. In order to optimize the traditional pyramidal lattice structure lightweight design and improve its sound insulation effect, the space composition and sound insulation characteristics of pyramidal lattice structures with solid trusses and hollow trusses having the same geometrical parameters were studied here, it was found that the lightweight performance and sound insulation properties of pyramidal lattice structures with hollow trusses in most parts of frequency domain are better than those of pyramidal lattice structures with solid trusses. Based on the direct acoustic-vibration coupling theory, the sound insulation characteristics of pyramidal lattice structures with hollow trusses were studied systematically with numerical methods. The influences of several key structural parameters of hollow truss, such as, elevation angle, wall thickness, length, and cross section shape as well as crystal lattice constant and in-plane size of lattice structure on sound insulation characteristics of the system were analyzed. The results provided a reference for the acoustic optimization of lattice structures.
|
|
Received: 16 August 2016
Published: 28 November 2017
|
|
|
|
[1]Alujevic N,Frampton K,Gardonio P.Stability and performance of a smart double panel with decentralized active dampers[J]. AIAA Journal,2008,46(7):1747-1756.
[2]卢天键，辛锋先.轻质板壳结构设计的振动和声学基础[M].北京：科学出版社，2012.
LU Tianjian，Xin Fengxian.Vibration and acoustic basis of lightweight plate and shell structure design[M].Beijing:Science Press,2012.
[3]Shen.C,Xin.F.X,Lu.T.J.Sound transmission across composite laminate sandwiches:Influence of orthogonal stiffeners and laminate layup[J] .Composite Structures,2016,143(4):310-316.
[4]王康乐,温华兵，陆金铭,等.橡胶芯夹层板隔声特性研究[J].噪声与振动控制,2014,34(2):190-197.
Wang Kangle,Wen Huabing,Lu Jinming et al.The sound transmission loss of sandwich with rubber sore [J].Noise and vibration,2014,34(2):190-197.
[5]N.Chandra,S.Raja,K.V.NagendraGopal.Vibro-acoustic response and sound transmission loss analysis of functionally graded plates[J]. Journal of Sound and Vibration,2014,333:5786-5802.
[6]M.P.Arurnkumar,M.Jagadeesh.Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings:effect of inherent material damping[J].Journal of Sound and Vibration,2016.
[7]文瑶.周期性开孔阻尼复合结构的声学特性研究[D]. 武汉：湖北工业大学，2015.
Wen Yao.Research on Acoustic characteristics of periodic perforated damping composite plate structure[D].Wuhan:Hubei University of Technology,2015.
[8]Shen.C,Xin.F.X,Lu.T.J.Theoretical model for sound transmission through finite sandwich structures with corrugated core[J].International Journal of Non-Linear Mechanics.2012,47(12):1066-1072.
[9]严胜杰.轻质点阵结构中振动与声传播特性研究[D].哈尔滨：哈尔滨工业大学，2013.
Yan Shengjie.Research on vibration and sound propagation in lightweight lattice structure[D].Harbin:Harbin Institute of Technology,2013.
[10]Ehsan Moosavimehr,Sound transmission characteristics of sandwich panels with a truss lattice core [D].Vancouver The University of British Columbia,2016
[11]Shen.C,Zhang.Q,Jin.F.C,Sound transmission loss of adhesively bonded sandwich panels with pyramidal truss core :theory and experiment[J].International Journal of Applied Mechanics,2015
[12]陈馨蕊，郝志勇,杨陈，等.结构-声耦合法在汽车仪表板隔声性能仿真分析中的应用[J]. 振动与冲击，2009，28（8）:154-157,206
Chen Xinrui, Hao Zhiyong，Yang chen，et al.Simulation on sound insulation performance analysis of automotive dash by using structure-sound interaction method[J]. Journal of vibration and shock,2009,28(8):154-157.
[13]W.Larbi,J.F.Deu,R.Ohayon.Vibroacoustic analysis of double-wall sandwich panels with viscoelastic core[J]. Computers and Structures,2015,1-12.
[14]Wang Tongan,Li Shan,Steven R.Nutt.Optimal design of acoustical sandwich panels with a genetic algorithm[J].Applied Acoustics,2009,70:416-425.
[15]Cheng.L,Li.Y.Y,Gao.J.X,et al.Energy transmission in a mechanically-linked double-wall structure coupled to an acoustic enclosure[J]. Journal of the Acoustical society of America,2005,117(5):2742-2751.
[16]杜功焕，朱哲民，蔡秀芬.声学基础[M]南京：南京大学出版社，2001.
Du Gonghuan,,Zhu Zheming,Cai Xiufen.Acoustics foundation[M]. Nanjing:Nanjing University Press,2001.
[17]Huang changzheng,Steven Nutt.Sound transmission prediction by 3-D elasticity theory[J].Applied Acoustics,2009,70:730-736.
[18]LMS International.Numerical acoustics theoretical manual[M].
[19]孙勇敢，黎胜.受静压力作用加筋板隔声性能研究[J]. 振动与冲击,2016 ,35(6):169-173.
Sun Yonggan,Li Sheng.Sound transmission through stiffened plates under static pressure[J]. Journal of vibration and shock,2016,35(6):169-173.
[20]詹福良，徐俊伟.声学仿真计算从入门到精通[M].西安：西北工业大学出版社，2013
Zhan Fuliang,Xu Junwei.Acoustic simulation from entry to the master[M].Xian:Northwestern Polytechnical University Press,2013.
|
|
|
|
