旋转变刚度阻尼器抑制薄壁零件铣削颤振

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (1070 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Chatter is caused due to the poor rigidity of thin-walled parts during their milling process, so it is difficult to ensure their machining quality and efficiency. Here, a novel rotary passive damper possessing variable stiffness was designed with its natural frequency changed through rotating the damper orientation. The design sizes were determined based on the vibration reduction theory and the finite element (FE) simulation. The modal tests for thin-walled parts were performed, then the damper’s optimal installation angle for chatter suppression of thin-walled parts milling was determined for milling processing frequency to avoid parts’ modal frequencies. Finally, the chatter suppression effect was verified with milling tests. It was shown that when the damper orientation is 80°, the amplitude of the system’s FRF drops to 9.8% of that without the damper; the optimal chatter suppression reaches when the damper orientation is 20°, the amplitude of the system’s FRF reduces to 13.6% of that when the damper orientation is 80°, the critical stable cutting depth of thin walled parts with no chatter increases by 1.8 times.

Key words： passive damper thin-walled part milling chatter

Received: 19 May 2016 Published: 15 January 2018

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Yiqing
	XIE Richeng
	XU Dongdong

Cite this article:

YANG Yiqing,XIE Richeng,XU Dongdong. Milling chatter suppression for thin-walled part processing using rotary passive damper with variable stiffness[J]. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(2): 72-75.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2018/V37/I2/72

[1] 李亮. 薄壁零件的加工振动分析与加工工艺研究[D].南京航空航天大学,2005.
Li Liang. Research on Cutting Vibration and Machining Technology in Milling Thin-walled Components[D]. Nanjing University of Aeronautics and Astronautics,2005.
[2] Aguirre G, Gorostiaga M, Porchez T, et al. Self-tuning semi-active tuned-mass damper for machine tool chatter suppression[J]. ISMA2012-USD2012, 2012: 109-124.
[3] Rashid A, Nicolescu C M. Active vibration control in palletised workholding system for milling[J]. International Journal of Machine Tools and Manufacture, 2006, 46(12-13), 1626-1636.
[4] 杨毅青, 徐东东. 基于电涡流阻尼器的数控加工振动抑制[J]. 振动与冲击,2016,35:177-181.
Yang Yi-qing, Xu Dong-dong.Vibration suppression of NC machining based on eddy current damper[J]. Journal of Vibration and Shock, 2016, 35:177-181.
[5] Kolluru K, Axinte D, Becker A. A solution for minimising vibrations in milling of thin walled casings by applying dampers to workpiece surface[J]. CIRP Annals Manufacturing Technology, 2013, 62(1): 415-418.
[6] Nakano Y, Takahara H, Kondo E. Countermeasure against chatter in end milling operations using multiple dynamic absorbers[J]. Journal of Sound and Vibration, 2013, 332(6): 1626-1638.
[7] 贾九红,章振华,杜俭业,等. 新型阻尼器的设计与试验研究[J]. 振动与冲击,2008,02:69-71.
Ji Jiu-hong, Zhang Zhen-hua, Du Jian-ye, et al. Design and experimental study on a retrofitted damper[J]. Journal of Vibration and Shock, 2008,02:69-71.
[8] Frahm H. Device for damping vibration of bodies[P].U.S:989958,1909.
[9] Rashid A, Nicolescu C. Active vibration control in palletised workholding system for milling[J]. International Journal of Machine Tools and Manufacture, 2006, 46(12-13), 1626-1636.
[10] Duncan G, Tummond M, Schmitz T. An investigation of the dynamic absorber effect in high speed machining[J]. International Journal of Machine Tools & Manufacture, 2005, 45(4–5): 497–507.
[11] 付杰,熊世树,纪晗,等. 多自由度结构的拟负刚度阻尼器减振效果分析[J]. 华中科技大学学报(自然科学版),2014,02:46-50.
Fu Jie, Xiong Shi-shu, Ji Han, et al. Analyzing vibration reduction effect of multi-degree of freedom structures using pseudo-negative-stiffness dampers[J]. Huazhong University of Science& Technology.
(Natural Science Edition), 2014,02:46-50.
[12] 杨毅青,代巍. 两自由度被动阻尼器设计及数控加工应用[J]. 计算机集成制造系统,2015,10:2653-2658.
Yang Yi-qing. Dai Wei. Design and machining application of the two-degree-of-freedom passive damper. Computer Integrated Manufacturing Systems,2015,10: 2653-2658.
[13] 赵晓文,侯忠明,杜彦亭.多自由度减振磁流变阻尼器的设计研究[J].地震工程与工程振动,2011,05:178-183.
Zhao Xiao-wen, Hou Zhong-ming, Du Yan-ting. Design and research of the multi-degree-of-freedom damping MR damper[J]. Journal of Earthquake Engineering and Engineering Vibration, 2011, 05:
178-183.
[14] Den Hartog J P. Mechanical vibrations[M]. McGraw-Hill Book Company， New York and London，1934.
[15] Brock J. A note on the damped vibration absorber[J]. Journal of Applied Mechanics， 1946， 13(4)：A284.