|
|
|
| Static and dynamic characteristics of flexure-pivot tilting pad journal bearings |
| CHEN shujiang XIONG Wentao LU Changhou MA Jinkui |
| 1.MOE Key Lab of High-efficiency and Clean Mechanical Manufacture, School of Mechanical Engineering, Shandong University, Jinan 250061, China |
|
|
|
Abstract A novel elliptical flexure-pivot tilting pad bearing was introduced here. The model of tilting pad oil film thickness, and the model of journal and tilting pad equilibrium were established based on the flexure hinge stiffness model built here. Using the finite difference method and Newton-Raphson method, the effects of rotational stiffness of flexure hinge on static and dynamic performances of the new bearing were analyzed. The results showed that the smaller the flexure hinge rotational stiffness, the closer to conventional tilting pad bearing the new bearing, the better the new bearing’s stability. The optimal rotational stiffness range of flexure hinge was also obtained. The study results provided a reference for the design and application of flexure-pivot tilting pad bearings.
|
|
Received: 20 July 2016
Published: 15 January 2018
|
|
|
|
[1] 张直明. 计入支点弹性和阻尼时可倾瓦轴承支撑的转子系统的动力稳定性[J]. 机械工程学报, 1983,19(2)：9-21．
ZHANG Zhiming. Rotor system’s dynamic stability with the titling-pad journal bearing reckoning in pivot stiffness and damping[J]. Chinese Journal of Mechanical Engineering, 1983, 19(2):9-21
[2] ZEIDAN F. Developments in fluid film bearing technology [J]. Turbomachinery International, 1992, 33(6):24-31.
[3] SAN Andrés L. Turbulent Flow, Flexure-Pivot Hybrid Bearings for Cryogenic Applications [J]. Journal of Tribology, 1996, 118(1): 190-200.
[4] DE Choudhury P, Hill M R, Paquette D J. A flexible pad bearing system for a high speed centrifugal compressor [C]. 1992, 187-209.
[5] ZEIDAN F, PAQUETTE D J. Application of high speed and high performance fluid film bearings in rotating machinery [C]. Proceedings of the Twenty Third Turbomachinery Symposium，1994, 147-169.
[6] ARMENTROUT R W, Paquette D J. Rotor dynamic Characteristics of Flexure-Pivot Tilting-Pad Journal Bearings [J]. Tribology Transactions, 1993, 36(3): 443-451.
[7] CHEN W J. Bearing Dynamic Coefficients of Flexible-Pad Journal Bearings [J]. Tribology transactions, 1995, 38(2): 253-260.
[8] WALTON N V, SAN Andrés L. Measurements of Static Loading versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing [J]. Journal of Tribology, 1997, 119(2): 297-304.
[9] SAN Andrés L, JACKSON M C. Measurements of the static load (on pad) performance and pad temperatures in a flexure-pivot tilting-pad bearing [J]. Tribology transactions, 1998, 41(2): 225-232.
[10] 陈贵敏, 刘小院, 贾建援. 椭圆柔性铰链的柔度计算[J]. 机械工程学报, 2006, 42(S1): 111-115.
CHEN Guimin, LIU Xiaoyuan, JIA Jianyuan. Compliance calculation of elliptical flexure hinge [J]. Chinese Journal of Mechanical Engineering, 2006, 42(S1): 111-115.
[11] 李元生,敖良波,李磊等. 滑动轴承动力特性系数动态分析方法[J]. 机械工程学报, 2010, 46(21): 48-53.
LI Yuansheng, AO Liangbo, LI Lei, et al. Dynamic analysis method of dynamic character coefficient of hydro-dynamic journal bearing[J]. Chinese Journal of Mechanical Engineering, 2010,46(21): 48-53.
[12] 谢帆, 荆建平, 万召等. 基于有限差分法的径向滑动轴承油膜压力分布计算[J]. 润滑与密封, 2012, 37(2): 12-15.
XIE Fan, JIN Jianping, WAN Zhao, et al. Calculation of oil film pressure distribution of journal bearing based on finite difference method [J]. Lubrication Engineering, 2012, 37(2): 12-15. [13] 敏政, 王乐, 魏志国等. 基于MATLAB技术的滑动轴承油膜压力分布的模拟[J].润滑与密封, 2008, 33(8): 5l-53．
MIN Zheng, WAN Le, WEI Zhiguo, et al. Simulation on pressure distribution of sliding bearing based on MATLAB technology [J]. Lubrication Engineering, 2008, 33(8): 51-53.
[14] ZEIDAN F. Fluid Film Bearing Fundamentals and Failure Analysis [C]. Proceedings of the 20th Annual Turbomachinery symposium, 1991, 161-186.
|
|
|
|
