基于动态等效刚度的平面柔性铰链建模与分析

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (1445 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Here, a planar flexible hinge was proposed to realize functions of Hook hinge.Based on the analysis of DOFs of this flexible hinge, its motion forms were extended. The theoretical model to calculate its dynamic equivalent stiffness was established for two poses of the hinge.The nonlinear variation law of the stiffness under large deformation pose was explored with Gaussian fitting method.The correctness of the model was verified on the finite element platform.According to the theoretical model, variation features of the whole hinge stiffness were analyzed, and the hinge performance characteristics were explored.Finally, the planar flexible hinge was introduced into a 6-DOF parallel vibration isolation platform.The rigid-flexible coupled dynamic analysis of the new platform was conducted using ADAMS and ANSYS combined simulation.The results showed that the proposed planar flexible hinge can meet requirements of Hooke hinge motions, and at the same time it can effectively avoid abrupt change problems of the vibration transmissibility caused by Hooke hinge gap.

Key words： flexible hinge hooke hinge equivalent stiffness nonlinear FEA parallel vibration isolation ibration

Received: 05 September 2017 Published: 28 January 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YING Lingjun
	ZHAO Rongzhen
	MA Defu
	TANG Xiaobin

Cite this article:

YING Lingjun,ZHAO Rongzhen,MA Defu, et al. Modeling and analysis for planar flexible hinges based on dynamic equivalent stiffness[J]. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(3): 222-228.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2019/V38/I3/222

[1] 白争锋,赵阳,赵志刚.考虑运动副间隙的机构动态特性研究[J]. 振动与冲击, 2011, 30(11):17-20.
BAI Zhengfeng, ZHAO Yang, ZHAO Zhigang.Dynamic characteristics of mechanisms with joint clearance[J]. Journal of Vibration and Shock, 2011, 30(11):17-20.
[2] HOWELL L L. Compliant mechanisms[M]. John Wiley & Sons, 2001.
[3] FOWLER R M, MASELLI A, PLUIMERS P, et al. Flex-16: A large-displacement monolithic compliant rotational hinge[J]. Mechanism & Machine Theory, 2014, 82(24)：203-217.
[4] 郑洋洋,宫金良,张彦斐.基于传递矩阵法的柔性杠杆放大机构刚度分析[J]. 北京航空航天大学学报, 2017, 43(4):849-856.
ZHENG Yangyang, GONG Jinliang, ZHANG Yanfei. Stiffness analysis of a flexible lever magnifying mechanism based on transfer matrix method [J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(4):849-856.
[5] SATPAL S B, DATTA R, CHATURVEDI V, et al. Design and experimentation on passive vibration isolation systems using PZT- PDMS composite and a shape memory alloy wire integrated mechanism[J]. Ifac Proceedings Volumes, 2014, 47(1)：981-988.
[6] 于靖军,郝广波,陈贵敏,等.柔性机构及其应用研究进展[J]. 机械工程学报, 2015, 51(13)：53-68.
YU Jingjun, HAO Guangbo, CHEN Guimin, et al. State-of-art of compliant mechanisms and their applications[J] . Journal of Mechanical Engineering, 2015, 51(13)：53-68.
[7] 邱丽芳,楚红岩,杨德斌,等.基于伪刚体模型的多层LEMs建模与仿真[J]. 农业机械学报, 2013, 44(9)：255-260.
QIU Lifang, CHU Hongyan, YANG Debin, et al. Modeling and simulation of multi-layered lamina emergent mechanisms based on pseudo-rigid-body [J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(9)：255-260.
[8] RAD F P, BERSELLI G, VERTECHY R, et al. Design and stiffness analysis of a compliant spherical chain with three degrees of freedom[J]. Precision Engineering, 2017, 47：1-9.
[9] RAD F P, VERTECHY R, BERSELLI G, et al. Analytical compliance analysis and finite element verification of spherical flexure hinges for spatial compliant mechanisms[J]. Mechanism & Machine Theory, 2016, 101：168-180.
[10] LIU M, ZHANG X M, FATIKOW S. Design and analysis of a multi-notched flexure hinge for compliant mechanisms[J]. Precision Engineering, 2017, 48：292–304.
[11] Magleby S P, Albrechtsen N B, Howell L L. Identifying Potential Applications for Lamina Emergent Mechanisms Using Technology Push Product Development[C]// ASME International Design Engineering Technical Conferences. 2010:513-521.
[12] WILDING S E, HOWELL L L, MAGLEBY S P. Introduction of planar compliant joints designed for combined bending and axial loading conditions in lamina emergent mechanisms[J]. Mechanism & Machine Theory, 2012, 56(56)：1–15.
[13] 邱丽芳,韦志鸿,徐金梧.新型平面折展机构柔性铰链等效刚度分析[J]. 机械工程学报, 2014, 50(17)：25-30.
QIU Lifang, WEI Zhihong, XU Jinwu. Analysis of equivalent stiffness of new LEMs flexure hinge [J]. Journal of Mechanical Engineering, 2014, 50(17)：25-30.
[14] QIU L F, YIN S Q, XIE Z T. Failure analysis and performance comparison of Triple-LET and LET flexure hinges[J]. Engineering Failure Analysis, 2016, 66：35-43.
[15] YU J J, LI S Z, PEI X, et al. A unified approach to type synthesis of both rigid and flexure parallel mechanisms[J]. Science China Technological Sciences, 2011, 54(5)：1206-1219.
[16] WU Z J, JING X J, SUN B, et al. A 6DOF passive vibration isolator using X-shape supporting structures[J]. Journal of Sound & Vibration, 2016, 380：90-111.