|
|
|
| Meso-damage modes and mechanism of PBX explosive under Taylor impact loading |
| CAI Xuanming1，ZHANG Wei2，XU Peng1，GAO Yubo1，FAN Zhiqiang1 |
1. National Defense Key Subject Laboratory,North University of China,Taiyuan 030051,China;
2. High-speed Impact Research Center,Harbin Institute of Technology,Harbin 150080,China |
|
|
|
|
Abstract In high velocity penetration process of air-ground penetrating bombs,pre-initiation of charge (PBX explosive) seriously affects damage to targets. Aiming at this problem urgently needed to be solved,meso-damage modes and mechanism of PBX explosive were studied under high g-value loading. Based on the first stage light gas gun,a laser speed measurement system was used to monitor tested specimens’ speed to hit targets,piezoelectric sensors were used to collect stress states of tested specimens,and the damage form of PBX explosive was studied under Taylor impact loading. Based on the meso-damage theory,meso-damage modes of PBX explosive were analyzed using the scanning electronic microscope (SEM). The results showed that the shear de-bonding meso damage mode between crystal particles’ surface and binder firstly occurs under a smaller impact load; with increase in impact load energy,meso-damage cracks appear,and they spread rapidly along weak stress paths to produce new damage cracks,crack propagations are so complicated to cause particles broken,meso-damage modes,such as,trans-granular fracture and binder splitting happen to lead to occurrence of PBX explosive’s macroscopic damage cracks; the prediction results of PBX explosive’s meso-damage modes using the meso-damage theory of PBX explosive agree well with those of test analysis,the proposed PBX explosive’s meso-damage theory provides an important basis for studying its meso-damage mechanism.
|
|
Received: 03 April 2018
Published: 28 March 2019
|
|
|
|
[1] Guo Mao-lin, Ma Zhong-liang, He Li-ming, et al. Effect of varied proportion of GAP-ETPE/NC as binder on thermal decomposition behaviors, stability and mechanical properties of nitramine propellants [J]. Journal of Thermal Analysis and Calorimetry，2017，130(2): 909-918.
[2] Boronski D, Kotyk M, Mackowiak P, et al. Mechanical properties of explosively welded AA2519-AA1050-Ti6Al4V layered material at ambient and cryogenic conditions [J].Materials & Design， 2017，133(5): 390-403.
[3] Hang Gui-yun, Yu Wen-li, Wang Tao, et al. Comparative studies on structures, mechanical properties, sensitivity,stabilities and detonation performance of CL-20/TNT cocrystal and composite explosives by molecular dynamics simulation [J]. Journal of Molecular Modeling，2017，23(10): 281-290.
[4] Hussein A K, Elbeih A, Zeman S. Thermal decomposition kinetics and explosive properties of a mixture based on cis-1,3,4,6-tetranitrooctahydroimidazo-[4,5-d]imidazole and 3-nitro-1,2, 4-triazol-5-one (BCHMX/NTO) [J]. Thermochimica Acta，2017，655(9): 292-301.
[5] Gargano A, Pingkarawat K, Blacklock M, et al. Comparative assessment of the explosive blast performance of carbon and glass fibre-polymer composites used in naval ship structures [J]. Composite Structures，2017，171(7): 306-316.
[6] 耿振刚，李秀地，苗朝阳等. 温压炸药爆炸冲击波在坑道内的传播规律研究[J]. 振动与冲击，2017，36(5): 23-29.
GENG Zhen-gang，LI Xiu-di，MIAO Chao-yang, et al. Propagation of blast wave of thermobaric explosive inside a tunnel [J]. Journal of Vibration and Shock，2017，36(5): 23-29.
[7] 赵跃堂，寇伟晓，储程等. 管片衬砌结构在接触爆炸荷载作用下的毁伤特性分析[J]. 振动与冲击，2018，37(11): 95-100.
ZHAO Yue-tang，KOU Wei-xiao，CHU Cheng, et al. Damage characteristics analysis for segment lining structures under contact detonation [J]. Journal of Vibration and Shock，2018，37(11): 95-100.
[8] Baker W A, Untaroiu C D, Crawford D M, et al. Mechanical characterization and finite element implementationof the soft materials used in a novel anthropometric test device for simulating underbody blast loading [J]. Journal of The Mechanical Behavior of Biomedical Materials，2017，74(10): 358-364.
[9] Abid M, Hou Xiao-meng, Zheng Wen-zhong, et al. High temperature and residual properties of reactive powder concrete - A review [J]. Construction and Building Materials，2017，147(8): 339-351.
[10] LI Jun-ling, FU Hua, TAN Duo-wang, et al. Fracture Behaviour Investigation into a Polymer-Bonded Explosive [J]. Strain，2012，48(6): 463-473.
[11] WU Yan-qing, HUANG Feng-lei. A micromechanical model for predicting combined damage of particles and interface debonding in PBX explosives [J]. Mechanics of materials，2009，41(1): 27-47.
[12] 陈鹏万. 高聚物粘结炸药的力学行为及变形破坏机理[J]. 含能材料，2000，8(4): 161-164.
CHEN Peng-wan. Mechanical behaviour and deformation and failure mechanisms of polymer bonded explosives [J]. Chinese Journal of Energetic Material，2000，8(4): 161-164.
[13] 李俊玲，傅华，谭多望等. PBX炸药的拉伸断裂损伤分析[J]. 爆炸与冲击，2011，31(6): 624-628.
LI Jun-ling, FU Hua, TAN Duo-wang et al. Fracture damage analysis of PBX [J]. Explosion and Shock Waves，2011，31(6): 624-628.
[14] Suraj R, Addis T, Addis K. Multiscale damage evolution in polymer bonded sugar under dynamic loading [J]. Mechanics of Materialsa，2017，114: 97-100.
[15] D. W. N. On the Detachment of a Rigid Inclusion from an Elastic Matrix [J]. Journal of Adhesion,1979，10(3):255-260.
[16] 何平笙. 高聚物的力学性能[M]. 合肥：中国科学技术大学出版社，2008：252-255.
HE Ping-sheng. Mechanical properties of polymers [M]. Hefei: China University of Science and Technology press， 2008:200-295.
|
|
|
|
