|
|
|
| A study on the optimization method of structural dynamic propertie of blades based on concave deformation of airfoil |
| MA Jianlong1,2,HUO Dehao1,LI Xuebin1,DUAN Yafan1,WU Yuqing1,WANG Jianwen1,2 |
1. School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China;
2. Key Laboratory of Wind Energy and Solar Energy Technology, Ministry of Education, Hohhot 010051, China |
|
|
|
|
Abstract In this study, the blade of a distributed horizontal axis wind turbine was selected as the research model and its stiffness, damping ratio and natural frequency were improved for the first time by airfoil concave on the premise of not reducing the blade power output under the rated working condition.The research revealed that the airfoil’s inner concave on the suction surface could better control the position and influence range of airflow convergence on suction surface, and combined with the inducing effect of grooves on the convergence streamline, it can reduce the energy loss of airflow to a certain extent and improve the blade’s aerodynamic performance.In addition, the airfoil concave can significantly increase 1st-order and 2nd-order damping ratios of the wind wheel by 3%— 9%, increase the stiffness value of the blade by 32%, and effectively reduce the maximum displacement and the maximum strain of the blade by 28% and 19%, respectively.Successful application of airfoil concave in the design of wind turbine blades will not only provide a new method for the derivation of airfoil family, but can also provide a new way for synchronous optimization of the aerodynamic performance and structural dynamic performance of the blade.
|
|
Received: 17 July 2018
Published: 15 April 2019
|
|
|
|
[1] Grasso F. ECN-G1-21 airfoil: design and wind-tunnel testing[J]. Journal of aircraft, 2016, 53(5): 1478-1484.
[2] Mohamed M H. Performance investigation of H-rotor Darrieus turbine with new airfoil shapes[J]. Energy, 2012, 47(1): 522-530.
[3] Wang, Q, Wang, J , Sun, J F, et al. Optimal design of wind turbine airfoils based on functional integral and curvature smooth continuous theory[J]. Aerospace Science and Technology, 2016, 55: 34-42.
[4] Chen J, Wang Q, Zhang S Q, et al. A new direct design method of wind turbine airfoils and wind tunnel experiment[J]. Applied Mathematical Modelling, 2016, 40(3): 2002-2014.
[5] Liu Y X, Yang C, Song X C. An airfoil parameterization method for the representation and optimization of wind turbine special airfoil[J]. Journal of Thermal Science, 2015, 24(2): 99-108.
[6] Mei Yi, Qu J J, Li Yan. Airfoil design for vertical axis wind turbine operating at variable tip speed ratios[J]. Open Mechanical Engineering Journal, 2015, 9(1): 1007-1016.
[7] Bedon G , De Betta S, Benini E. Performance-optimized airfoil for darrieus wind turbines[J]. Renewable Energy, 2016, 94: 328-340.
[8] Tartuferi M, D'Alessandro V, Montelpare S, et al. Enhancement of savonius wind rotor aerodynamic performance: A computational study of new blade shapes and curtain systems[J]. Energy, 2015, 79(C): 371-384.
[9] Birajdar M, Kale S, Sapali S N. Effects of design parameters on aerodynamic performance of new profile small wind turbine blades[C]. ASME 2015 International Mechanical Engineering Congress and Exposition. Houston: IMECE2015, 2016.
[10] Menon M, Ponta F, Sun X, et al. Aerodynamic analysis of flow-control devices for wind turbine applications based on the trailing-edge slotted-flap concept[J]. Journal of Aerospace engineering, 2016, 29(5).
[11] Cai C, Zuo Z, Maeda T, et al. Periodic and aperiodic flow patterns around an airfoil with leading-edge protuberances[J]. Physics of Fluids, 2017, 29(11).
[12] Liu P, Chen J, Xin S, et al. Experimental Investigation on the Tip Vortex of a Wind Turbine With and Without a Slotted Tip[C]// ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 2017:V009T49A011.
[13] Ahmed M R, Nabolaniwaqa E. Performance Improvement of a Wind Turbine Blade Designed for Low Wind Speeds With a Passive Trailing Edge Flap[C]// ASME 2012 International Mechanical Engineering Congress and Exposition. 2012:1753-1762.
[14] Wang G F, Zhang M M, Jian-Zhong X U. Experimental Study on Bionic Wavy Edge Aerodynamic Characteristics of Airfoil[J]. Journal of Engineering Thermophysics, 2013, 34(10):1842-1846.
[15] Hansen K L, Kelso R M, Dally B B. Performance Variations of Leading-Edge Tubercles for Distinct Airfoil Profiles[J]. Aiaa Journal, 2011, 49(1):185-194.
[16] Sun X, Dai Q, Menon M, et al. Design and Simulation of Active External Trailing-Edge Flaps for Wind Turbine Blades on Load Reduction[J]. Journal of Aerospace Engineering, 2017, 30(5).
|
|
|
|
