|
|
Finite element analysis for bolt axial stress measurement based on acoustoelastic effect |
SUN Chaoming, WANG Zengyong, LI Jianwen, SUN Kaihua |
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China |
|
|
Abstract To promote the effective application of ultrasonic wave technique in quantitative evaluation of bolt tightening state, combining with requirements of actual detection, an appropriate finite element (FE) model was established for the bolt axial stress measurement method based on acoustoelastic effect. A 2-D axisymmetric mode was used to simulate bolt M8×25, and a 10 MHz ultrasonic transducer was placed on the bolt head. In FE simulation, a hyper-elastic material with Murnaghan third-order elastic constants was used to do coupling analysis for structural field and acoustic one. Through two studying steps, the ultrasonic waveform signal for bolt axial tension state was determined. The FE computation results showed that there is a linear relationship between time difference of ultrasonic wave propagation (ns) and bolt axial stress (MPa), and this relationship varies with change of bolt clamped length and its material; for the bolt axial stress measurement method based on acoustoelastic effect, the linear coefficient’s correct measurement is very important. The FE computation results were analyzed deeply, it was shown that bolt stress state has a superposition effect on ultrasonic wave propagation change in bolt; different bolt clamped length causes larger change of acoustoelastic effect, this should be paid enough attentions to; the FE computation results agree well with those of analytical calculation and practical test measurement; the proposed FE model for bolt axial stress measurement with the ultrasonic wave method can be used to solve the difficult problem of acoustoelastic effect’s numerical simulation and analysis, and provide a technical guidance for analysis of detection methods and development of specific instruments.
|
Received: 17 January 2018
Published: 28 June 2019
|
|
|
|
[1]COUCHMAN J C. The acousto-elastic fastener preload indicator, AFML-TR-78-138[R]. Ohio:U.S. Air force,1978.
[2]VIKTOR H. Structural and residual stress analysis by nondestructive methods [M]. Netherlands:Elsevier Press, 1997.
[3]FUKUOKA H. Development of acoustoelasticity in Japan [J]. Nondestructive Testing and Evaluation, 1992,7:181-192.
[4]HUGHES D S, Kelly J L. Second-order elastic deformation of solids[J]. Physical Review,1953,92(5):1145-1149.
[5]HEYMAN J S. A CW ultrasonic bolt-strain monitor[J]. Experimental Mechanics,1977,17(5):183-187.
[6]CHAKI S, BOURSE G. Guided ultrasonic waves for non-destructive monitoring of the stress levels in prestressed steel strands[J]. Ultrasonics, 2009, 49:162–171.
[7]XU D, WU X J, WANG Y G. Bolt axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducer[J]. Ultrasonics, 2014, 54:914–920.
[8]KAMYSHEV A V, NIKITINA N E, SMIRNOV V A, et al. Measurement of the residual stresses in the treads of railway wheels by the acoustoelasticity method[J]. Russian Journal of Nondestructive Testing, 2010, 46(3):189–193.
[9]MONTOYA A, DOYLE D, MAJI A, et al. Ultrasonic evaluation of bolted connections in satellites[J]. Research in Nondestructive Evaluation, 2014,25:44–62.
[10]NASSAR S A,VEERAM A B. Ultrasonic control of fastener tightening using varying wave speed[J]. Journal of Pressure Vessel Technology,2006,128:427-432.
[11]JHANG K Y, QUAN H H, HA J, et al. Estimation of clamping force in high-tension bolts through ultrasonic velocity measurement [J]. Ultrasonics,2006,44:e1339–e1342.
[12]CHAKI S, CORNELOUP G, LILLAMAND I, et al. Combination of longitudinal and transverse ultrasonic waves for in situ control of the tightening of bolts[J]. Journal of Pressure Vessel Technology, 2007,129:383-390.
[13]SANDERSON R M, SHEN Y C. Measurement of residual stress using laser-generated ultrasound[J]. International Journal of Pressure Vessels and Piping, 2010,87:762-765.
[14]WATSON N J, HAZLEHURST T, POVEY M J W, et al. COMSOL modelling of the acoustoelastic effect[J]. Journal of Physics: Conference Series ,2015,581:012008.
[15]钱祖文. 非线性声学[M]. 北京:科学出版社, 2009. |
|
|
|