|
|
A method reducing effect of installation error in accelerometer gravimetric calibration |
ZHAN Weiwei, CAI Li |
China Earthquake Disaster Prevention Center, Beijing 100029, China |
|
|
Abstract Here, a modified model based on the nonlinear least square fitting method was proposed for solving the problem of initial misalignment angle caused by installation error in accelerometer gravimetric calibration. Verification tests were conducted for the modified model using a gravimetric static calibration device. The test results indicated that the modified model can be used to correctly calibrate parameters of the initial misalignment angle to reduce the effect of installation error on the calibrated result in accelerometer gravimetric calibration.
|
Received: 17 January 2018
Published: 28 June 2019
|
|
|
|
[1] 王雷, 王绍荣, 高峰. 力平衡加速度计传递函数和标定方法分析[J]. 地球物理学进展, 2009, 24(6):2293-2297.
WANG Lei, WANG Shao-rong, GAO Feng. Analysis of force balance accelrometer transfer function and calibration method[J]. Progress in Geophys, 2009, 24(6):2293-2297.
[2] 李永光. 高精度加速度计标定与补偿技术研究[D]. 哈尔滨工业大学, 2011.
[3] 董雪明, 何懿才, 关伟. 加速度计校准技术综述[J]. 计测技术, 2014, 34(4):5-9.
DONG Xue-ming, HE Yi-cai, GUAN Wei. Review of linear accelerometer calibration techniques[J]. Metrology and Measurement Technology, 2014, 34(4):5-9.
[4] 朱家友, 李华容, 卜继军,等. 加速度计八位置标定测试系统的开发[J]. 压电与声光, 2007, 29(2):170-172.
ZHU Jia-you, LI Hua-rong, BU Ji-jun, et al. Exploitation of accelerometer eight position mesauring system[J]. Piezoelectectrics and Acoustooptics, 2007, 29(2):170-172.
[5] 王新龙, 申功勋, 何乃刚. 一种有效的加速度计静态模型辨识方法[J]. 仪器仪表学报, 2003, 24(1):57-60.
WANG Xin-long, SHEN Gong-xun, HE Nai-gang. An efficient discrimination method of the accelerometer static model parameters[J]. Chinese Journal of Scientific Instrument, 2003, 24(1):57-60.
[6] 王大千, 张英敏. 加速度计1 g重力场静态翻滚测试与误差分析[J]. 机械与电子, 2009, 2009(1):34-36.
WANG Da-qian, ZHANG Ying-min. Accelerometer’s static rolling test in 1g-Gravitational field and error analysis[J]. Machinery and Electronics, 2009, 2009(1):34-36.
[7] 任顺清, 冯士伟, 马向斌. 加速度计的全组合标定方法[J]. 中国惯性技术学报, 2007, 15(6):760-764.
REN Shun-qing, FENG Shi-wei, MA Xiang-bin. All combination method for calibrating accelerometer[J]. Journal of Chinese Intertial Technology, 2007, 15(6):760-764.
[8] 孙世政, 何泽银, 董绍江. 基于差商法的嵌入式角位移传感器自标定[J]. 振动与冲击, 2017, 36(13):252-257.
SUN Shizheng, HE Zeyin, DONG Shaojiang. Self-calibration for embedded type angle displacement sensor based on difference quotients[J]. Journal of Vibration and Shock, 2017, 36(13):252-257.
[9] 陈宝林. 最优化理论与算法[M]. 北京:清华大学出版社, 2005.
[10] GB/T 13823.19-2008. 振动与冲击传感器的校准方法 地球重力法校准[S]. 北京:中国标准出版社, 2009.
|
|
|
|