领扩眼钻具间钻铤数量对随钻扩眼钻进特性的影响研究

Abstract
Figure/Table
References (22)
Related Citation (15)

Download: PDF (2262 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Reaming while drilling (RWD) is often accompanied by violent vibration causing early failure of reamer and slower rate of penetration.In order to reduce lateral vibration of reamer and prolong their life, a nonlinear dynamic finite element model for drilling tools-rock interaction was established to analyze effects of number of drilling collars between pilot bit and reamer on drilling tools’ drill pressure distribution, lateral vibration intensity and rate of penetration. The results showed that placing appropriate number of drill collars between pilot bit and reamer can effectively reduce drilling tools’ reaming pressure ratio and lateral vibration intensity of reamer, and improve rate of penetration (ROP); designing reamer placed below and far away from the neutral point can reduce the risk of its failure; under the working condition here, the optimal number of drill collars between pilot bit and reamer is 3; the study results can provide a certain guidance for RWD drilling tools combination design and prolonging reamer life.

Key words： reaming while drilling the number of drill collar larteral vibration weight distribution rate of penetration

Received: 07 February 2018 Published: 28 July 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHU Xiaohua1
	LI Mingyue1
	DAI Liming2

Cite this article:

ZHU Xiaohua1,LI Mingyue1,DAI Liming2. Effects of number of drill collars between pilot bit and reamer on drilling performance of reaming while drilling[J]. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(15): 42-48.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2019/V38/I15/42

[1] 汪海阁,葛云华,石林.深井超深井钻完井技术现状、挑战和“十三五”发展方向[J]. 天然气工业, 2017, 37(04): 1-8.
WANG Haige, GE Yunhua, SHI Lin. The technical status and challenge of deep well and ultradeep well,and development direction in the 13th Five-Year Plan[J]. Natural Gas Industry,2017,37(04):1-8.
[2] Morel.B; Hafle.M; Thomson.I,et al. Proper bit and underreamer synchronization concept delivered excellent performance in GoM deepwater well[C] // Offshore Technolo -gy Conference. Houston USA: Offshore Technology Confere -nce, 2010.
[3] 苏伟,甘霖,孙月明,等. Rhino XS8000型扩眼器在渝东南首次运用的认识[J]. 钻采工艺,2016,39(06):97-99.
SU Wei, GAN Lin, SUN Yueming,et al. The first application of Rhino XS8000 reamer in southeast Chongqing[J]. Drilling and Production Technology,2016,39(06):97-99.
[4] Meyer-Heye B, Reckmann H, Ostermeyer G P. Underreamer Dynamics[C]// Society of Petroleum Engineers, 2011.
[5] 李子丰,张永贵,侯绪田,刘卫东,徐国强.钻柱纵向和扭转振动分析[J].工程力学,2004, 21(06):203-210.
LI Zifeng, ZHANG Yonggui, HOU Xutian,et al. Analysis of longitudinal and torsion vibration of drillstring[J].Engineeri -ng Mechanics, 2004, 21(06):203-210.
[6] Heisig G, Hood J, Okewunmi O,et al. Achieving Shoe-to -Shoe Drilling Performance in Hole-Opening Application With Rotary-Steerable Systems[C]// SPE/IADC Drilling Conference. 2007.
[7] 祝效华,刘云海,刘婷. 定向穿越扩孔钻进软硬夹层钻头振动特性研究[J]. 振动.测试与诊断, 2016, 36(05): 915–921 +1024.
ZHU Xiaohua, LIU Yunhai, LIU Ting. Vibration characteri -stics analysis of reamer drilling in the soft and hard sandwiching[J]. Vibration test and diagnosis, 2016, 36(05): 915-921+1024.
[8] Barton S, Weeden R. Accurate matching of bit and reamer tools delivers optimized drilling performance [R].SPE132057, 2010.
[9] Ma R, Ji Y, Wang H,et al. Dual-Factor Method for Calculating Weight Distribution in Reaming While Drilling[M]. 2012.
[10] Bailey J R, Remmert S M. Managing Drilling Vibrations Through BHA Design Optimization[J]. Spe Drilling & Completion, 2010, 25(4):458-471.
[11] 张强,付建红,李浩然. 随钻扩眼钻柱结构优选及现场应用效果评价[J]. 石油机械,2016, 44(09):23-26.
ZHANG Qiang, FU Jianhong, LI Haoran. Reaming while drilling drillstring structure optimization and application performance evaluation[J]. China Petroleum Machinery, 2016, 44(09):23-26.
[12] Vila P, Dhaher K S, Miller G C, et al. Successful Hole Enlargement While Drilling in Deepwater Offshore Brazil[C]//OTC Brasil. Offshore Technology Conference, 2011.
[13] 刘刚,张家林,刘闯,等.钻头钻进不同介质时的振动信号特征识别研究[J].振动与冲击,2017,36(8):71-78.
LIU Gang,ZHANG Jialin,LIU Chuang.An identification method of vibration signal features when bit drills different mediums[J].Journal of Vibration and Shock,2017,36(8): 71-78.
[14] Zhu X, Jun J. Improving the drilling performance of hole enlargement via optimized operation[J]. Journal of Mechanical Engineering Science, 2015, 229(9): 1563- 1577.
[15] 任福深,陈素丽,姚志刚.轴向载荷作用下细长柔性旋转梁横向振动响应分析[J].中国机械工程,2013,24(24):3392-3396.
REN Fushen, CHEN Suli, YAO Zhigang.Vibration response analysis of slender flexible revolving beam under axial load[J]. China Mechanical Engineering,2013,24(24):3392 -3396.
[16] 祝效华,汤历平,童华. 高频扭转冲击钻进的减振与提速机理研究[J]. 振动与冲击,2012,31(20):75-78+109.
ZHU Xiaohua, TANG Liping, TONG Hua. Rock breaking mechanism of a high frequency torsional impact drilling[J]. Journal of Vibration and Shock, 2012, 31(20): 75-78+109.
[17] 蔡美峰,何满潮,刘东燕.岩石力学与工程[M].北京:科学出版社,2002.
CAI Meifeng, HE Manchao, LIU Dongyan. Rock mechanics and engineering[M].Beijing: Science Press,2002.
[18] 林铁军,练章华,孟英峰,等. 空气钻井中动态破岩有限元仿真研究[J]. 岩石力学与工程学报, 2008, 27 (S2): 3592- 3597.
LIN Tiejun, LIAN Zhanghua, MENG Yingfeng,et al. Finite elements method study on dynamic rock breaking in air drilling[J]. chinese journal of rock mechanics and engineering,2008, 27(S2):3592-3597.
[19] 吴应凯. RWD随钻扩眼下部钻具组合设计与力学行为研究[D].西南石油大学, 2004.
WU Yingkai.The RWD BHA design and mechanical behavior research[D]. Southwest Petroleum University, 2004.
[20] 杨柄秀. Power-v和MWD垂直技术在苏丹Azqra L-1井中的应用[J]. 中国石油和化工标准与质量, 2014(11):90-90.
YANG Bingxiu. The application of Power-v and MWD vertical technologies in the Sudan Azqra l-1 well[J]. China Petroleum and Chemical Standard and Quality, 2014(11):90 -90.
[21] Jardinez A, Guzman G, Karrer C, et al. Advanced FEA Modeling Produces First Directional Tandem Reamer BHA: Eliminates Trip on Deepwater Exploration Well[M]. Society of Petroleum Engineers, 2014.
[22] 魏水平,况雨春,夏宇文,等.钻柱瞬态动力学失效分析[J].石油机械,2006, 34(06):20-23+1.
WEI Shuiping, KUANG Yuchun, XIA Yuwen,et al. Analysis on drilling string transient dynamic failure[J]. China Petroleum Machinery, 2006, 34(06):20-23+1.