|
|
Comprehensive comparative analysis for vibration characteristics of several typical composite panels and their design law |
LIU Jianliang 1 ,MEI Zhiyuan 2 ,TANG Yuhang 2 , ZHANG Yanbing 1 ,ZHANG Jianshe 3 |
1. School of Naval Architecture & Ocean, Naval University of Engineering, Wuhan 430033, China;
2. PLA 92578 Unit, Beijing 100161, China;
3. Wuhan Hiway Naval Architecture and Ocean Engineering Technology Co., Ltd. Wuhan 430033, China |
|
|
Abstract To investigate the influence law of composite panels’ design parameters on their vibration characteristics, simulation analysis and model tests were conducted for three panel schemes of C/GFRP, rubber-core grid sandwich and buoyant-core one to obtain their natural frequencies and vibration acceleration level characteristics.The results showed that a C/GFRP panel has the same mass as that of a GFRP panel with equal thickness, C/GFRP panel has a better vibration suppression feature; grid sandwich panels’ vibration characteristics are mainly affected by core material properties, buoyant-core grid sandwich panel has the largest ratio of stiffness to mass, and a better suppressing action on vibrations within the range of 0~2kHz,while rubber-core one has a better suppressing action on vibrations within the frequency range of higher than 2kHz, so core material with higher damping and stiffness close to that of grid should be chosen; the 20mm equal thickness C/GFRP panel’s vibration level is slightly lower than that of buoyant-core one; the conclusions above mentioned can provide a basis for application type selection of composite panels.
|
Received: 23 January 2018
Published: 28 July 2019
|
|
|
|
[1] Vinson J R,Kayran A. Free vibration analysis of laminated composite truncated circular shells[J]. Aiaa Journal,2015,28(7):1259-1269.
[2] 梅志远, 杨坤, 邱家波. 复合材料面板对筒型基座整体抑振机制影响规律研究[J]. 振动与冲击, 2012, 31(9):149-153.
MEI Zhiyuan, YANG Kun, QIU Jiabo. Damping mechanism of sandwich panel on cylindrical foundation[J]. Journal of Vibration and Shock, 2012, 31(9):149-153.
[3] 马力,杨金水. 新型轻质复合材料夹芯结构振动阻尼性能研究进展[J]. 应用数学和力学,2017,38(4):369-398.
MA Li, YANG Jin-shui. Progresses in the Study on Vibration Damping Properties of Novel Lightweight Composite Sandwich Structures[J]. Applied Mathematics and Mechanics. 2017, 38(4):369-398.
[4] Shaidurova G I, Kostyaeva V I, Dyagileva M V. Fiberglass-composite exhaust pipes for gas compressors[J]. Russian Engineering Research, 2016, 36(11):930-933.
[5] Swan S, Yuksel T, Kim D, et al. Automation of the vacuum assisted resin transfer molding process for recreational composite yachts[J]. Polymer Composites, 2017, 38(11) : 2411-2424.
[6] Sonnenschein R, Gajdosova K, Holly I. FRP Composites and their Using in the Construction of Bridges[J]. Procedia Engineering, 2016, 161:477-482.
[7] 黄志诚, 秦朝烨, 褚福磊. 附加粘弹阻尼层的薄壁构件振动问题研究综述[J]. 振动与冲击, 2014, 33(7):105-113.
HUANG Zhicheng, QIN Zhaoye, ZHU Fulei. A review about vibration of thin-walled structures with viscoelastic damping layer[J]. Journal of Vibration and Shock, 2014, 33(7):105-113.
[8] 何世平,刘桂峰,金广文. 水下结构去耦覆盖层的动力吸振器效应研究[J]. 振动工程学报,2014,27(2):208-214.
HE Shi-ping, LIU Gui-feng, JIN Guang-wen. Dynamic absorber characteristics of decoupling coating covering underwater structure[J]. Journal of Vibration Engineering. 2014, 27(2):208-214.
[9] Arunkumar M P, Pitchaimani J, Gangadharan K V, et al. Influence of nature of core on vibro acoustic behavior of sandwich aerospace structures[J]. Aerospace Science & Technology, 2016, 56:155-167.
[10] Farooq U, Ahmad M S, Rakha S A, et al. Interfacial Mechanical Performance of Composite Honeycomb Sandwich Panels for Aerospace Applications[J]. Arabian Journal for Science & Engineering, 2017, 42(5):1775-1782.
[11] Mukhopadhyay V. Blended-Wing-Body(BWB)fuselage structural design for weight reduction[R]. AIAA-2005-2349,2005.
[12] Vinson J R. Sandwich structures:past,present,and future[M].//Thomsen O T,Bozhevolnaya E,Lyckegaard A. Sandwich structures 7:advancing with sandwich structures and materials. Berlin:Springer,2005:3-12.
[13] 唐宇航,陈志坚,孙建连. 基于增抗增阻技术的船用母线线槽抑振设计[J]. 华中科技大学学报(自然科学版). 2017,45(8):120-126.
TANG Yuhang, CHEN Zhijian, SUN Jianlian. Vibration suppression design of marine busway based increasing resistance and increasing resistance technology[J]. Huazhong Univ. of Sci. &Tech. (Natural Science Edition). 2017,45(8):120-126.
[14] 赵士贵,袭建人,陈国文. 碳纤维/玻璃纤维混杂复合材料性能研究[J]. 工程塑料应用,1999,27(12):10-11.
ZHAO Shigui, XI Jianren, CHEN Guowen. The mechanical properties of CF/GF/EPOXY composites[J]. Engineering Plastics Application. 1999, 27(12):10-11.
[15] Zhang J,Chaisombat K,He S, et al. Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures [J]. Materials and Design,2012,36:75-80.
[16] Murugan R,Ramesh R,Padmanabhan K. Investigation on Static and Dynamic Mechanical Properties of Epoxy Based Woven Fabric Glass/Carbon Hybrid Composite Laminates[J]. Procedia Engineering,2014,97:459-468.
[17] Niu M C Y. Airfranme stress analysis and sizing[M]. 2nd Edition. Hong Kong:Hong Kong Conmilit Press LTD,1999.
[18] 任鹏, 张伟, 刘建华,等. 水下冲击波作用的铝合金蜂窝夹层板动力学响应研究[J]. 振动与冲击, 2016, 35(2):7-11.
REN Peng, ZHANG Wei, LIU Jianhua, et al. Dynamic analysis of aluminum alloy honeycomb core sandwich panels subjected to underwater shock loading[J]. Journal of Vibration and Shock, 2016, 35(2):7-11. |
|
|
|