|
|
|
| Dynamic modeling and vibration analysis of ball screw feed driving systems |
| FU Zhenbiao1,WANG Taiyong1,ZHANG Lei1,YANG Qian2 |
1. School of Mechanical Engineering，Tianjin University，Tianjin 300350，China
2. College of Applied Sciences，Beijing University of Technology，Beijing 100124，China |
|
|
|
Abstract Considering the contact rigidity of each contact surface from ball screw feed drives, a finite element (FE) modeling method was proposed.The screw nut, the linear guide, and the bearing were modeled by mass-spring systems.The contact rigidity was precisely calculated based on the Hertz contact theory.A dynamic model of the ball screw feed drive was established with an improved meshing scheme in ANSYS.The first-five vibration modes and natural frequencies were acquired.The modal experiment was conducted using hammer impact excitation.It is found that the simulated results correspond closely with the experimental data and the maximal error of the natural frequency is 8.9%.Based on the established model, the influences of the spindle quality, the linear guide preload, and the block interval were investigated.The work contributes to the vibration analysis and structure optimization of ball screw feed drives.
|
|
Received: 09 December 2017
Published: 15 August 2019
|
|
|
|
[1] Vicente D A , Hecker R L，Villegasv F J，et al. Modeling and vibration mode analysis of a ball screw drive[J]. The International Journal of Advanced Manufacturing Technology, 2012,58(1-4)：257-265.
[2] Wang Renche, Zhao Tong, Ye Peiqing，et al. Three-dimensional Modeling for Predicting the Vibration Modes of Twin Ball Screw Driving Table[J]. Chinese Journal of Mechanical Engineering, 2014, 27(1)：211-218.
[3] S. Frey, A. Dadalau , A. Verl. Expedient Modeling of Ball Screw Feed Drives[J]. Production Engineering, 2012, 6(2)：205-211.
[4] Zhang Huijie , Zhang Jun, Liu Hui, et al. Dynamic Modeling and Analysis of the High-speed Ball Screw Feed System[J] . Journal of Engineering Manufacture, 2015, 229(5)：870-877.
[5] Zhou Yong, Peng Fangyu. Parameter Sensitivity Analysis of Axial Vibration for Lead-screw Feed Drives with Time-varying Framework [J].Mechanika,2011, 17(5)：523-528.
[6] Liang Mi, Yin Guofu , Sun Mingnan, et al. Effects of Preloads on Joints on Dynamic Stiffness of a Whole Machine Tool Structure[J]. Journal of Mechanical Science and Technology, 2012, 26(2)：495-508.
[7] Wang Dazhong, Lu Yan, Zhang Tongchao, et al. Effect of Stiffness of Rolling Joints on the Dynamic Characteristic of Ball Screw Feed Systems in a Milling Machine [J].Shock and Vibration,2015,5(7)：1-11.
[8] Yuan Lunglai , Jui Pinhung . Influence of Linear Guide Arrangement on the Vibration Characteristics of a Positioning Stage[J]. Journal of the Chinese Society of Mechanical Engineers,2012, 26(2)：113-122.
[9] 向红标，裘祖荣，李醒飞，等.测量机滚珠丝杠Z轴伺服系统的动力学建模及补偿[J]．天津大学学报，2011，44(4)：292-295．
Xiang Hongbiao，Qiu Zurong，Li Xingfei ,et al. Dynamic Modeling and Compensation for the Ball Screw Z-Axis Servo System of Measuring Machine [J]. Journal of Tianjin University , 2016，44(4)：292-295 (in Chinese)．
[10] Ching Yuanlin, Jui Pinhung, and Tzuo Lianglo. Effect of Preload of Linear Guides on Dynamic Characteristics of a Vertical Column-Spindle System[J]. International Journal of Machine Tools & Manufacture, 2010,vol.50(1). 741-746.
[11] Hung Juipin, Lai Yuanlung, Lin Chingyuan, et al. Modeling the Machining Stability of a Vertical Milling Machine Under the Influence of the Preloaded Linear Guide[J].International Journal of Machine Tools & Manufacture, 2011,55(1)：731-739.
[12] A. Erturk, H. N. Ozguven, and E. Budak. Analytical Modeling of Spindle–Tool Dynamics on Machine Tools Using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF[J]. International Journal of Machine Tools & Manufacture, 2016,46(1)：1901-1912.
[13] Hung Juipin, Lai Yuanlung, Luo Tzuliang, et al. Analysis of the Machining Stability of a Milling Machine Considering the Effect of Machine Frame Structure and Spindle Bearings: Experimental and Finite Element Approaches[J]. International Journal of Advanced Manufacturing Technology, 2013,68(1)：2393-2405.
[14] 牛文铁，田建伟，王俊强.基于iSIGHT 的机床整机结构方案设计与集成优化[J]．天津大学学报，2016，49(2)：121-126．
Niu Wentie，Tian Jianwei，Wang Junqiang. Schematic Design and Integrated Optimization of Machine Tool Based on iSIGHT [J]. Journal of Tianjin University ,2016， 49(2)：121-126 (in Chinese)．
[15]朱坚民，张统超，李孝茹.基于结合部刚度特性的滚珠丝杠进给系统动态特性分析[J].机械工程学报,2015,52(17): 72-80.
Zhu Jianmin, Zhang Tongchao ,Li Xiaoru.Dynamic Characteristic Analysis of Ball Screw Feed System Based on Stiffness Characteristic of Mechanical Joints[J]. Journal of Mechanical Engineering, 2015,52(17): 72-80(in Chinese)．
[16] 程 来，宋言明，李 贺等. 基于等效接触区域的螺栓连接结构模态分析[J]. 机械设计与研究. 2012, 28(2)：42-47.
Cheng Lai, Song Yanming, Li He, et al. Modal Analysis Based on the Equivalent Contact Area of the Structure With Bolt Connections [J]. Machine Design and Research, 2012, 28(2)：42-47.
[17] 冈本纯三（著）．球轴承的设计计算[M]．黄志强（译），罗继伟（译）．北京：机械工业出版社,2003.163-175.
Okamoto Junzo.Calculation And Design of Ball Bearing. Tribology International [M]. Huang Zhiqiang（trans）,Luo Jiwei（trans） Beijing: China Machine Press, 2003(in Chinese).
[18] 上银科技股份有限公司.上银直线导轨选型手册[EB/OL]．www.hiwin.com.tw，2006．
Hiwin Technologies Company. Hiwin Linear Guideway Technical Information [EB/OL]．www.hiwin.com.tw，2006(in Chinese)．
[19]哈尔滨轴承集团公司.哈尔滨轴承样本手册[EB/OL]．http://www.hrbbrg.cn，2016．
Harbin Bearing Group Corp. Harbin Bearing Hand Book [EB/OL]．http://www.hrbbrg.cn，2016(in Chinese)．
[20] 冯虎田．滚珠丝杠副动力学与设计基础[M]．北京：机械工业出版社,2014.69-71.
Fen Hutian. The Dynamic and Design Foundation of Ball-screw Pairs [M]. Beijing: China Machine Press, 2014.69-71. (in Chinese).
[21] 银泰科技股份有限公司.台湾银泰PMI滚珠丝杠样本书[EB/OL]．http://www.pmi-amt.com，2016．
PMI GROUP. Taiwan Yintai PMI ball screw sample book [EB/OL]．http://www.pmi-amt.com，2016(in Chinese).
|
|
|
|
