基于多任务深度学习的齿轮箱多故障诊断方法

Abstract
Figure/Table
References (20)
Related Citation (15)

Download: PDF (2415 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The field of mechanical fault diagnosis enters a "big data" era, and the deep learning achieves fruitful results in mechanical big data processing with its powerful adaptive feature extraction and classification capabilities.However, this method is used in a single-label system to diagnose a single target fault.Under the background of big data, the single-label system not only cuts apart connections among different target faults of mechanical equipment, but also is difficult to fully describe lots of equipment fault state information, such as, fault location, type, and degree, etc.Here, a diagnosis method based on the multi-task deep learning model was proposed to simultaneously diagnose faults of bearing and gear in gearbox.It was shown that with this method, features of different targets can adaptively be extracted from the same signal, and then these features are used to perform fault diagnosis through a separate task layer.The test results showed that the proposed method realizes simultaneous correct diagnosis of bearing and gear different faults in gearbox under multiple working conditions and a large number of samples.

Key words： mechanical fault diagnosis multi-task deep learning bearing gear

Received: 29 May 2018 Published: 28 November 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Xiaoping1
	WU Jiaxin1
	QIAN Chengshan1
	ZHANG Yonghong2
	WANG Lihua2

Cite this article:

ZHAO Xiaoping1,WU Jiaxin1,QIAN Chengshan1, et al. Multi-fault diagnosis for gearboxes based on multi-task deep learning[J]. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(23): 271-278.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2019/V38/I23/271

[1] 张震. 基于小波神经网络专家系统的齿轮箱故障诊断研究[D]. 燕山大学, 2010.
ZHANG Zhen. Fault diagnosis of gear-box based on wavelet neural network expert systems[D]. Yanshan University, 2010
[2] 刘胜, 江娜. 基于SVM的故障预报中的并行优化仿真研究[J]. 系统仿真学报, 2008, 20(13): 3445-3448.
LIU Sheng, JIANG Na. Research on parallel optimization simulation of fault prediction based on SVM[J]. Journal of System Simulation, 2008, 20(13): 3445-3448.
[3] SHAO Hai-dong, JIANG Hong-kai, ZHANG Xun, et al. Rolling bearing fault diagnosis using an optimization deep belief network[J]. Measurement Science & Technology, 2015, 26(11).
[4] WANG Xing-qing, LI Yan-feng, TING Rui, et al. Bearing fault diagnosis method based on Hilbert envelope spectrum and deep belief network[J]. Journal of Vibroengineering, 2015, 17(3): 1295-1308.
[5] CHEN Zhi-qiang, LI Chuan, Sánchez RV. Multi-layer neural network with deep belief network for gearbox fault diagnosis[J]. Journal of Vibroengineering, 2015, 17(5): 2379-2392.
[6] LI Chuan, Sánchez RV, Zurita G, et al. Multimodal deep support vector classification with homologous features and its application to gearbox fault diagnosis[J]. Neurocomputing, 2015, 168(C): 119-127.
[7] SUN Wen-jun, SHAO Si-yu, ZHAO Rui, et al. A sparse auto-encoder-based deep neural network approach for induction motor faults classification [J]. Measurement, 2016, 89(ISFA):171-178.
[8] PANG Shan, YANG X,in-yi ZHANG Xiao-feng. Aero Engine Component Fault Diagnosis Using Multi-Hidden-Layer Extreme Learning Machine with Optimized Structure[J]. International Journal of Aerospace Engineering, 2016, 1329561.
[9] SHAHERYAR A, YIN Xu, HAO Hong-wei, et al. A Denoising based Auto-Associative model for robust sensor monitoring in Nuclear Power Plant[J]. Science and Technology of Nuclear Installations,2016, 9746948.
[10] YANG Zhi-xin, WANG Xiao-bo, ZHONG Jian-hua. Representational Learning for Fault Diagnosis of Wind Turbine Equipment: A Multi-Layered Extreme Learning Machines Approach [J]. Energies, 2016, 9060379.
[11] 张绍辉, 罗洁思. 基于频谱包络曲线的稀疏自编码算法及在齿轮箱故障诊断的应用[J]. 振动与冲击, 2018, 37(4): 249-256.
ZHANG Shao-hui, LUO Jie-si. Sparse autoencoder algorithm based on spectral envelope curve and Its application in gearbox fault diagnosis[J]. Journal of vibration and shock, 2018, 37(4): 249-256.
[12] LIU Hong-mei, LI Lian-feng, MA Jian. Rolling Bearing Fault Diagnosis Based on STFT-Deep Learning and Sound Signals[J]. Shock and Vibration, 2016, 6127479.
[13] WANG Lu-kun, ZHAO Xiao-ying, PEI Jian-nan, et al. Transformer fault diagnosis using continuous sparse autoencoder[J]. Springer plus, 2016, 5(1): 448-461.
[14] LU Chen, WANG Zhen-ya, QIN Wei-li, et al. Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification[J]. Signal Processing, 2017, 130(C): 377-388.
[15] ZHANG Wei, PENG Gao-liang, LI Chuan-hao. Advances in Intelligent Information Hiding and Multimedia Signal Processing[M], Taiwan, Springer, 2016:77-84
[16] WANG Li-hua, ZHAO Xiao-ping, WU Jia-xin, et al. Motor Fault Diagnosis Based on Short-time Fourier Transform and Convolutional Neural Network[J]. Chinese Journal of Mechanical Engineering, 2017, 30(6): 1357-1368.
[17] Verstraete D, ferrada A S, Droguett E L, et al. Deep Learning Enabled Fault Diagnosis Using Time-Frequency Image Analysis of Rolling Element Bearings[J]. Shock & Vibration, 2017, 5067651.
[18] Lecun Y, Bengio Y. Convolutional Networks for Images, Speech, and Time-Series[C]// The Handbook of Brain Theory and Neural Networks. 1995.
[19] Krizhevsky A, Sutskever I, Hinton G E. ImageNet classification with deep convolutional neural networks[C]// International Conference on Neural Information Processing Systems. Curran Associates Inc. 2012:1097-1105.
[20] Salakhutdinov R, Hinton G E. Replicated Softmax: an Undirected Topic Model[C]// International Conference on Neural Information Processing Systems. Curran Associates Inc. 2010:1607-1614.