#br# 随机车辆荷载下大跨钢桥伸缩缝纵向位移响应及病害控制研究

Abstract
Figure/Table
References (20)
Related Citation (15)

Download: PDF (2083 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract An expansion joint is one of the vulnerable bridge parts, and for long-span steel bridges, which are vibration sensitive due to high flexibility, their expansion joints encounter more significant damage.To control the damage of expansion joints of long-span steel bridges, an approach for analyzing the displacements of expansion joints under stochastic traffic flow was established, based on the stochastic vehicle model and finite element analysis.The influence of speed, vehicle-induced vibration frequency, traffic volume and heavy traffic on longitudinal displacements was investigated, and it is found that with higher vehicle speed and vibration frequency, larger traffic volume and more heavy vehicles, the cumulative displacements of expansion joints significantly increase.Two kinds of traffic limit measures and installing viscous dampers at beam ends are suggested, so as to control the damage of expansion joints.Analysis results show that the vehicle-type based measure is more effective than the time-based measure.After the use of viscous dampers at beam ends, there is a significant reduce in displacement amplitude, cumulative displacement and high-frequency displacements.

Key words： stochastic traffic flow expansion joint finite element analysis cumulative displacement viscous damper speed limit

Received: 18 April 2019 Published: 15 December 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HAN Dazhang1
	GUO Tong2
	HUANG Lingyu2
	LIU Zhongxiang2

Cite this article:

HAN Dazhang1,GUO Tong2,HUANG Lingyu2, et al. A study on longitudinal displacements and damage control of expansion joints of long-span steel bridges under stochastic traffic loads[J]. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(24): 172-178.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2019/V38/I24/172

[1] Lima J M, Brito J D. Inspection survey of 150 expansionjoints in road bridges[J]. Engineering Structures, 2009, 31(5):1077-1084.
[2] 李杨海, 程潮洋, 鲍卫刚, 等. 公路桥梁伸缩装置实用手册[M]. 北京: 人民交通出版社, 2007.
LI Yang-hai, CHENG Chao-yang, BAO Wei-gang, et al. Practical Handbook for Expansion joints of Highway Bridges [M]. Beijing: China Communications Press, 2007.
[3] 黄灵宇. 大跨钢桥伸缩缝的性能评估与病害控制研究[D]. 南京: 东南大学, 2017.
[4] GUO Tong, Liu Jie, Huang Ling-yu. Investigation and control of excessive cumulative girder movements of long-span steel suspension bridges[J]. Engineering Structures, 2016, 125: 217-226.
[5] Lima J M, Brito J D. Management system for expansion joints of road bridges [J]. Structure and Infrastructure Engineering, 2010, 6(6): 703-714.
[6] 丁勇, 黄奇, 谢旭, 等. 载重汽车桥梁伸缩缝跳车动力荷载计算方法与影响因素分析[J]. 土木工程学报, 2013, 46(7): 98-107.
DING Yong, HUANG Qi, XIE Xu, et al. A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors [J]. China Civil Engineering Journal, 2013, 46(7): 98-107.
[7] Yoda T, Ayashi M. Design of bridge expansion joints with perforated dowels under impact loading [J]. Transactions of Tianjin University, 2008, 14(5): 340-343.
[8] 王立成, 王清湘, 司炳君, 等. 模块型桥梁伸缩缝疲劳试验研究[J]. 土木工程学报, 2004, 37(12): 44-49.
WANG Li-cheng, WANG Qing-xiang, SI Bing-jun, et al. Experimental research on fatigue testing of modular bridge expansion joint [J]. China Civil Engineering Journal, 2013, 2004, 37(12): 44-49.
[9] Ghimire J P, Matsumoto Y, Yamaguchi H, et al. Numerical investigation of noise generation and radiation from an existing modular expansion joint between prestressed concrete bridges [J]. Journal of Sound and Vibration, 2009, 328(1): 129-147.
[10] JTG D60-2015. 公路桥涵设计通用规范[S]. 北京: 人民交通出版社股份有限公司, 2015.
JTG D60-2015. General Specifications for Design of Highway Bridges and Culverts [S]. Beijing: China Communications Press Co.,Ltd., 2015.
[11] AASHTO LRFD bridge design specifications: Section 14: Joints and bearings[s]. 8th Ed.,Washington DC: AASHTO, 2017.
[12] 孙君, 李爱群, 丁幼亮, 等. 大跨悬索桥结构损伤预警系统的设计与实现研究[J]. 振动与冲击, 2009, 28(12): 53-57.
SUN Jun, LI Ai-qun, DING You-liang, et al. Design and implementation of damage early warning system for long-span suspension bridge[J]. Journal of Vibration and Shock, 2009, 28(12): 53-57.
[13] Run Yang Crossing-Nan Cha Main Bridge expansion joint regular inspection report[R]. Shanghai: Mageba (Shanghai) Bridge Products Co., Ltd., 2011.
[14] GUO Tong, LIU Jie, HUANG Ling-yu. Investigation and control of excessive cumulative girder movements of long-span steel suspension bridges[J]. Engineering Structures, 2016, 125: 217-226.
[15] ANSYS, Version 10.0: user’s manual. Canonsburg, PA: ANSYS, Inc.; 2005.
[16] GUO Tong, LIU Zhong-xiang, PAN Zhi-hong, et al. Cracking of longitudinal diaphragms in long-span cable-stayed bridges [J]. Journal of Bridge Engineering, 2015, 20(11): 04015011.
[17] 张喜刚. 公路桥梁汽车荷载标准研究[M]. 北京: 中国人民交通出版社, 2014.
ZHANG Xi-gang. Study on characteristic Value of Vehicle Load of Highway Bridges [M]. Beijing: China Communications Press, 2014.
[18] GUO Tong, Frangopol D M, Chen Y. Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis [J]. Computers & Structures, 2012, 112: 245-257.
[19] 张宇峰, 陈雄飞, 张立涛, 等.大跨悬索桥伸缩缝状态分析与处理措施[J]. 桥梁建设, 2013, 43(5):49-54.
ZHANG Yu-feng, CHEN Xiong-fei, ZHANG Li-tao, et al. Condition analysis and handling measures for expansion joints of long span suspension bridges [J]. Bridge Construction, 2013, 43(5):49-54.
[20] Afukaar F K. Speed control in developing countries: issues, challenges and opportunities in reducing road traffic injuries [J]. Injury Control and Safety Promotion, 2003, 10(1-2): 77-81.