|
|
|
| Dynamic characteristics of a double helical gear system considering accumulation pitch error |
| YUAN Bing1, CHANG Shan2,3, LIU Geng2, LIU Lan2, JIANG Lidong3 |
1.School of Mechanical Engineering, Xi’an Technological University, Xi’an 710021, China;
2.Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi’an 710072, China;
3.China Shipbuilding Industry Corporation 703 Institute, Harbin 150078, China |
|
|
|
|
Abstract Based on Timoshenko beam theory and the finite element method, introducing time-varying meshing stiffness and composite meshing error, the dynamic model of a double-helical gear system was established to study effects of accumulative pitch error on dynamic characteristics of the system.The results showed that accumulative pitch error makes dynamic transmission error have significant shaft frequency and sideband frequency components; when load torque is smaller, sideband frequency components are larger than meshing frequency and its harmonics components ones; with increase in load torque, meshing frequency and its harmonics components gradually increase; when accumulative pitch errors have different phases, the system have obvious axial movement phenomenon, and accumulative pitch error’s phase difference affects system vibration significantly; adjusting phase difference can remarkably reduce system vibration; the study results can provide a theoretical basis for low noise design, processing and assembly of double helical gear systems.
|
|
Received: 04 April 2018
Published: 28 January 2020
|
|
|
|
[1] 吴新跃, 朱石坚. 人字齿轮传动的振动理论分析模型 [J]. 海军工程大学学报, 2001, 13(5): 13-19.
Wu Xinyue, Zhu Shijian. Theoretical vibration pattern of herringbone gearing [J]. Journal of Naval University of Engineering, 2001, 13(5): 13-19.
[2] 王成, 高常青, 崔焕勇. 基于啮合特性的人字齿轮动力学建模与分析 [J]. 中南大学学报(自然科学版), 2012, 43(8): 3019-3024.
Wang Cheng, Gao Changqing, Cui Huanyong. Dynamic modeling and analysis of double helical gears based on meshing characers [J]. Journal of Central South University (Science and Technology), 2012, 43(8): 3019-3024.
[3] 戴日辉, 侯梦琪, 郭家舜, 等. 高速大功率人字齿轮传动的轴向振动特性研究 [J]. 机械传动, 2014, 38(7): 13-17.
Dai Rihui, Hou Mengqi, Guo Jiashun, et al. Research of the axial vibration characteristic of high speed and high power double helical gear transmission [J]. Journal of Mechanical Transmission, 2014, 38(7): 13-17.
[4] 陆凤霞, 王浩飞, 朱如鹏, 等. 基于齿面摩擦的人字齿轮副动力学特性分析 [J]. 振动与冲击, 2016, 35(9): 204-212.
Lu Fengxia, Wang Haofei, Zhu Rupeng, et al. Dynamic characteristics analysis of double helical gear pairs considering teeth surface sliding friction [J]. Journal of Vibration and Shock, 2016, 35(9): 204-212.
[5] 王峰, 方宗德, 李声晋. 多载荷工况下人字齿轮传动系统振动特性分析 [J]. 振动与冲击, 2013, 32(1): 49-52.
Wang Feng, Fang Zongde, Li Shengjin. Dynamic characteristics of a double helical gear under multi-load [J]. Journal of Vibration and Shock, 2013, 32(1): 49-52.
[6] Chen S Y, Tang J Y, Zhou C J, et al. Modal and whirling analysis of coupled lateral and torsional vibration of herringbone gear [J]. International Journal of Dynamics Control, 2014, 2(3): 404-414.
[7] Chen S Y, Tang J Y, Li Y P, et al. Rotordynamics analysis of a double-helical gear transmission system [J]. Meccanica, 2016, 51(1): 251-268.
[8] Chen S Y, Tang J Y. Effects of staggering and pitch error on the dynamic response of a double-helical gear set [J]. Journal of Vibration and Control, 2015, 23(11): 1844-1856.
[9] Kang M R, Kahraman A. An experimental and theoretical study of the dynamic behavior of double-helical gear sets [J]. Journal of Sound and Vibration, 2015, 350: 11-29.
[10] Yin M H, Chen G D, Su H. Theoretical and experimental studies on dynamics of double-helical gear system supported by journal bearings [J]. Advances in Mechanical Engineering, 2016, 8(5): 1-13.
[11] Liu C Z, Qin D T, Liao Y H. Dynamic model of variable speed process for herringbone gears including friction calculated by variable friction coefficient [J]. Journal of Mechanical Design, 2014, 136: 041006.
[12] 郭家舜, 王三民, 王颖. 基于解析解的人字齿轮齿廓修形动态分析 [J]. 航空动力学报, 2013, 28(3): 613-620.
Guo Jiashun, Wang Sanmin, Wang Yin. Dynamic analysis of tooth profile modification to herringbone gears based on analytical solutions [J]. Journal of Aerospace Power, 2013, 28(3): 613-620.
[13] 蒋进科, 方宗德, 贾海涛. 人字齿轮减振修形优化设计 [J]. 振动与冲击, 2015, 34(2): 9-13.
Jiang Jinke, Fang Zongde, Jia Haitao. Optimal design of minimum vibration for modified double helical gear [J]. Journal of Vibration and Shock, 2015, 34(2): 9-13.
[14] 赵宁, 秋朋园, 刘贵立. 高重合度人字齿轮轮齿最佳修形优化设计 [J]. 国防科技大学学报, 2015, 37(1): 165-170.
Zhao Ning, Qiu Pengyuan, Liu Guili. Modification optimization of doouble helical gears with high contact ratio [J]. Journal of National University of Defense Technology, 2015, 37(1): 165-170.
[15] 王峰, 方宗德, 李声晋, 等. 齿面三维修形对人字齿轮振动特性影响分析与试验研究 [J]. 振动工程学报, 2016, 29(2): 220-230.
Wang Feng, Fang Zongde, Li Shengjin, et al. A theoretical and experimental investigation on effect of three dimensional modification on vibration characteristics of herringbone gear system [J]. Journal of Vibration Engineering, 2016, 29(2): 220-230.
[16] Wang C, Cui H Y, Zhang Q P, et al. Modified optimization and experimental investigation of transmission error, vibration and noise for double helical gears [J]. Journal of Vibration and Control, 2016, 22(1): 108-120.
[17] Chang L H, Liu G, Wu L Y. A robust model for determining the mesh stiffness of cylindrical gears [J]. Mechanism and Machine Theory, 2015, 87, 93-114.
[18] Sainsot P, Velex P. Contribution of gear body to tooth deflections-a new bidimensional analytical formula [J]. Journal of Mechanical Design, 2004, 126: 748-752.
[19] 常乐浩, 刘更, 吴立言. 齿轮综合啮合误差计算方法及对系统振动的影响 [J]. 机械工程学报, 2015, 51(1): 123-130.
Chang Lehao, Liu Geng, Wu Liyan. Determination of composite meshing errors and its influence on the vibration of gear system [J]. Journal of Mechanical Engineering, 2015, 51(1): 123-130.
[20] 常乐浩, 贺朝霞, 刘更. 平行轴齿轮传动系统动力学建模的有限单元法 [J]. 振动与冲击, 2016, 35(20): 47-53.
Chang Lehao, He Zhaoxia, Liu Geng. Dynamic modeling of parallel shaft gear transmissions using finite element method [J]. Journal of Vibration and Shock, 2016, 35(20): 47-53.
[21] Hong J, Talbot D, Kahraman A. Effects of tooth indexing errors on load distribution and tooth load sharing of splines under combined loading conditions [J]. Journal of Mechanical Design, 2015, 137: 032601.
|
|
|
|
