双曲柄串联曲柄滑块压力机机构计算机仿真向量键合图法

Abstract
Figure/Table
References (16)
Related Citation (6)

Download: PDF (682 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To improve the efficiency and reliability of dynamic modeling and simulation for a double-crank series crank slider press mechanism, the vector bonding graph method was proposed.According to kinematic constraint relations among mechanism components, vector bonding graph models for mechanism moving components, revolute joints and translational ones were combined to establish the whole mechanism’s vector bonding graph model.Using the effective augmented method, the differential causality in the mechanism vector bonding graph model was eliminated to overcome the algebraic difficulty brought by it to mechanism automatic modeling, and realize the mechanism’s automatic modeling and simulation.Effects of working resistance in form of pulse on the mechanism dynamic performance were analyzed, and the effectiveness of the proposed method was presented.

Key words： vector bonding graph simulation double-crank series crank slider mechanism pulse pressing causality

Received: 22 June 2018 Published: 28 February 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Zhongshuang
	GAO Mengqi
	YIN Jiuzheng

Cite this article:

WANG Zhongshuang,GAO Mengqi,YIN Jiuzheng. Vector bonding graph method for simulation of double-crank series crank slider press mechanism[J]. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(5): 208-213.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2020/V39/I5/208

[1] 施立军.SDP-160F肘杆式伺服压力机样机设计及分析 [D].扬州：扬州大学，2013：1-33.
SHI Li-jun. Design and analysis of SDP-160 toggle press driven by servo motor[D]. Yangzhou: Yangzhou University, 2013: 1-33.
[2] 赵升吨，何予鹏，王军.机械压力机低速锻冲急回机构运动特性的研究[J]. 锻压装备与工业炉，2004，（3）：24-31.
    ZHAO Sheng-Dun, HE Yu-peng,Wang Jun. A study on the motion characteristics of the quick return and low speed forging of mechanical press[J]. Metalforming equipment ＆ industry, 2004, (3): 24-31.
[3] 洪嘉振著.计算多体系统动力学[M].北京：高等教育出版社，1999：1-319.
HONG Jia-zheng. Computational dynamics of multibody systems[M]. Beijing: Advanced Education Press, 1999: 1-319.
[4] 刘妤，徐梓翔，许洪斌等.基于刚柔耦合模型的微耕机振动特性分析[J].振动与冲击，2018，37（24）：250-255
    LIU Yu, XU Zixiang, XU Hongbin, et al. Analysis of vibration characteristics for power tillers based on a rigid-flexible coupling model[J]. Journal of Vibration and Shock, 2018, 37(24): 250-255
[5] Karnopp D C, Margolis D L, Rosenberg R C. System dynamics: modeling and simulation of mechatronic systems[M]. New York: Wiley, 2000：1-351.
[6] Sanchez R, Medina A. Wind turbine model simulation: A bond graph approach[J]. Simulation Modelling Practice and Theory. 2014, 41: 28-45.
[7] Mishra C, Samantaray A K, Chakraborty G. Bond graph modeling and experimental verification of an ovel scheme for fault diagnosis of rolling element bearings in special operating conditions[J]. Journal of Sound and Vibration, 2016, 377: 302–330.
[8] Kumar A, Pathak P M, Sukavanam N. Trajectory control of two DOF rigid-flexible space robot by a virtual space vehicle[J]. Robotics and Autonomous Systems, 2013, 61: 473~482
[9] 王中双.键合图理论及其在系统动力学中的应用[M]. 哈尔滨: 哈尔滨工程大学出版社，2000：116-127.
WANG Zhong-shuang. Bond graph theory and its application in system dynamics[M]. Harbin: Harbin Engineering University Press, 2000: 114-128.
[10] 王中双，陆念力，徐长顺. 平面柔性多体系统完全动力学问题的回转键合图法[J].中国机械工程，2005,16（23）：2093-2097.
WANG Zhong-shuang, LU Nian-li, XU Chang-shun. Gyrobondgraph method for complete dynamic problem of planar flexible multibody systems [J]. China Mechanical Engineering, 2005, 16(23):. 2093-2097.
[11] Behzadipour S, Khajepour A. Causality in vector bond graph and its application to modelling of   multi-body dynamic systems [J]. Simulation Modelling Practice and Theory, 2006, 14(3): 279-295.
[12] 王中双，赵彦伟，徐长顺。含槽轮副平面多体系统动力学建模向量键合图法[J]. 机械传动，2017，41（10）：75-79.
WANG Zhong-shuang, ZHAO Yan-wei, XU Chang-shun. A Vector bond graph method of dynamics modeling for planar multi － body Systems with grooved sheave[J]. Journal of Mechanical Transmission, 2017, 41(10): 75-79.
[13] 王中双，井维科. 基于向量键合图法的行星轮系动态静力分析[J].机械传动，2016,40（5）：20-23.
     WANG Zhong-shuang, JING Wei-ke. Kineto-static analysis of planetary gear train based on vector bond graph method[J]. Journal of Mechanical Transmission, 2016, 40(5): 20-23.
[14] 王中双，徐长顺，吕航. 平面多体系统动力学计算机仿真向量键合图法[J]. 机械科学与技术，2018,37（3）：402-408.
      WANG Zhong-shuang, XU Chang-shun, LV Hang. A vector bond graph method for computer simulation of planar multibody system dynamics[J]. Mechanical Science and technology, 2018,37（3）：402-408.
[15] 王中双，徐长顺，杨韬.含间隙平面连杆机构动力学建模与仿真向量键合图法[J].振动与冲击，2018，37（10）：202-207.
.     WANG Zhong-shuang, XU Chang-shun, YANG Tao. Vector bond graph method for the dynamic modelling and simulation of planar linkages with joint clearances[J]. Journal of Vibration and Shock, 2018, 37(10):202-207.
[16] 刘波，梅瑛，李瑞琴。平面双曲柄冲压机刚柔耦合模型的动态仿真[J].机械传动，2012，36（12）：                      68-71.
      LIU Bo, MEI Ying, LI Rui-qin. Dynamic simulation for rigid-flexible coupling model of planar double crank punch press[J]. Journal of Mechanical Transmission, 2012, 36(12): 68-71.