|
|
|
| Optimal stiffener layout design for plate and shell structures under dynamic load based on the adaptive growth method |
| DONG Xiaohu,DING Xiaohong |
| School of Mechanical Engineering, University of Shanghai for Science and Technology,Shanghai 200093, China |
|
|
|
Abstract The adaptive growth method (AGM) based on the growth fractal mechanism of branch systems in nature is a high-efficiency topology optimization method.The equivalent static load method (ESLM) was introduced to solve the dynamic response topology optimization of plate and shell structures under dynamic load.According to the boundary conditions of dynamic load, a mathematical model for the dynamic mobility optimization was established, and an iteration formula was derived.The stiffeners connected with the “seeding” was able to either grow or degenerate along the direction of the best overall mechanical property, and an optimum stiffeners layout was obtained finally.The results show that the main layout of stiffeners is the same under either static or dynamic loads.However, some small stiffeners are formed, which are close to the loading point and parallel to the main stiffeners, so as to more favorably transfer and share the load.
|
|
Received: 19 December 2018
Published: 15 July 2020
|
|
|
|
[1] 李德葆,陆秋海.工程振动试验分析[M]. 北京:清华大学出版社,2014.
LI Debao, LU Qiuhai. Analysis of experiments in engineering vibration[M]. Beijing: Tsinghua University Press, 2014.
[2] S. MIN, N. KIKUCHI, Y. C. PARK, S. KIM, S. CHANG. Optimal topology design of structures under dynamic loads[J]. Structural optimization, 1999,17(2-3)：208-218.
[3] SHU L, WANG M, FANG Z MA Z, WEI P. Level setbasedstructuraltopologyoptimizationforminimizing frequencyresponse [J]. JournalofSoundandVibration, 2011,330(24): 5820-5834.
[4] OLHOFF. N, DU J. Topological design for minimum dynamic compliance of structures under forced vibration[C]. In: Topology optimization in structural andcontinuum mechanics. Springer, 2014, p: 325-339.
[5] LIU B, HUANG X, HUANG C, SUN G, YAN X, LI G. Topological design of structures under dynamic periodic loads[J]. Engineering Structures, 2017, 142: 128-136.
[6] KANG BS, CHOI WS, PARK GJ. Structural optimization under equivalent static loads transformed from dynamic loads based on displacement[J]. Computer and Structures, 2000, 79(2001): 145-154.
[7] CHOI WS, PARK GJ. Structural optimization using equivalent static loads at all timeintervals[J]. Computer Methods in Applied Mechanics and Engineering, 2002, 191(2002): 2077-2094.
[8] PARK GJ, KANG BS. Validation of a structural optimization algorithm transforming dynamic loads into equivalent static loads[J]. Journal of Optimization Theory and Applications, 2003, 118(1): 191-200.
[9] PARK GJ. Technical overview of the equivalent static loads method for non-linear static response structural optimization[J]. Structural and Multidisciplinary Optimization, 2011, 43(3): 319-337.
[10] 杨志军.基于等效静态载荷原理的高速机构结构拓扑优化方法[J],机械工程学报,2011,47(17)：162-169.
YANG Zhijun. Topological optimization approach for structure design of high speed mechanisms using equivalent static loads method [J]. Journal of Mechanical Engineering, 2011,43(3): 319-337.
[11] 陆善彬，蒋伟波，左文杰.基于等效静态载荷法的汽车前端结构抗撞性尺寸和形貌优化[J],振动与冲击,2018,37(7)：56-61.
LUShanbin, JIANGWeibo, ZUO Wenjie. Size and morphology crashworthiness optimization for automotive frontal structures using equivalent static load method[J]. Journal of Mechanical Engineering, 2016, 52(9)：151-157.
[12] 季金,丁晓红,熊敏.基于最优准则法的板壳结构加筋自适应成长技术[J],机械工程学报,2014, 50(11)：162-169.
Ji Jin, Ding Xiaohong, Xiong Min. Adaptive growth technique of stiffener layout design for plate/shell structures based on optimality criterion[J]. Journal of Mechanical Engineering, 2014, 50(11)：162-169.
[13] Ji J, Ding X H, Xiong M. Optimal stiffener layout of plate and shell structures by bionic growth method [J]. Computers and Structures，2014，135(135)：88-99.
[14] Ji J, Ding X H. Stiffener Layout optimization of inlet structure for electrostatic precipitator by improved adaptive growth method[J]. Advances in Mechanical Engineering，2014(979604)：1-8.
[15] 季文美，方同，陈松淇.机械振动[M].北京：科学出版社，1985
JI Wenmei, FANG Tong, CHEN Songqi. mechanical vibration[M]. Beijing: Science Press, 1985.
|
|
|
|
