轻质弱辐射的阻尼夹芯复合材料圆柱壳的优化设计

Abstract
Figure/Table
References (24)
Related Citation (4)

Download: PDF (1339 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The vibration and acoustic radiation of composite cylindrical shells with damping sandwich (CCSDS) activated by pointed harmonic force were studied based on Three-dimensional elastic theory (TDET). A multi-objective function optimization model was built, whose Optimization objectives were total mass, fundamental frequency and model damping. The model was used to optimize the thickness distribution of fiber and sandwich layer as well as the modes of lay-up. The effectiveness of TDET was confirmed after compared with the results of other literatures and “FE-BE” method. The influencing factors for vibration and acoustic radiation of CCSDS were analyzed. It is revealed that when the sandwich layer’s median line is higher than the whole shell’s, it is favorable for increasing the fundamental frequency and reducing acoustic radiation power. With the increasing of lay-up angle, the natural frequency changes in the shape of parabola and modal damping ratio decreases gradually. After optimization, the first modal frequency of acoustic radiation power shifts to higher frequency by 20Hz and maximum acoustic power decreases by 11.66dB. The peak value density decreases apparently in the low-frequency stage of under 200Hz.

Key words： composite cylindrical shells damping sandwich vibration and acoustic radiation size optimization lay-up optimization

Received: 03 April 2019 Published: 15 August 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Shi1
	ZHAO Xingqian2
	3
	TONG Bo4

Cite this article:

WANG Shi1,ZHAO Xingqian2,3, et al. Optimization for composite cylindrical shells with light and weak-radiation damping sandwich[J]. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(16): 7-15.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2020/V39/I16/7

[1] 朱蓓丽，黄修长.潜艇隐身关键技术—声学覆盖层的设计[M].上海：上海交通大学出版社，2012.
Zhu Beili, Huang Xiuchang. Key technology of submarine stealth—design of acoustic coating[M]. Shanghai: Shanghai jiaotong university press.
[2] 罗忠，杨坤.水下夹芯复合空腔结构声学特性计算方法研究[J].振动与冲击，2013，32（8）：147-152.
Luo Zhong, Yang Kun. Acoustic property computing method for an underwater sandwich structure with cavum[J]. Journal of Vibration and Shock, 2013, 32(8): 147-152
[3] 朱子旭，朱锡，李永清，等. 复合材料夹芯结构研究现状及其在船舶工程的应用[J].舰船科学技术，2018，40（2）：1-7.
Zhu Zixu, Zhu Xi, Li Yongqing et al. Present researches about sandwich composite structures and its applies in ship industry. Ship Science and Technology. 2018, 40（2）: 1-7.
[4] Nikbakt S, Kamarian S, Shakeri M. A review on optimization of composite structures Part I: Laminated composites[J]. Composite Structures，2018，195：158-185.
[5] He M X，Sun J Q. Multi-objective structural-acoustic optimization of beams made of functionally graded materials[J]. Composite Structures，2018，185：221-228.
[6] Vemuluri R B，Rjamohan V，Sudhagar P E. Structural optimization of tapered composite sandwich plates partially treated with magnetorheological elastomers[J]. Composite Structures，2018，200：258-276.
[7] Santoni A, Bonfiglio P, Mollica F, et al. Vibro-acoustic optimisation of Wood Plastic Composite systems[J]. Construction and Building Materials, 2018, 174:730-740.
[8] Yuan C, Roozen N B, Bergsma O, et al. Multi-discipline optimization of sandwich cylinders under a point force excitation[J]. Aerospace Science and Technology，2013，30：183-191.
[9] Dannemann M，Olaf T，et al. Combined semi-analytical and numerical vibro-acoustic design approach for anisotropic fibre-reinforced composite structures[J]. Journal of Sound and Vibration，2017，404：1-14.
[10] Akoussan K，Hamdaoui M，et al. Improved layer-wise optimization algorithm for the design of viscoelastic composite structures[J]. Composite Structures，2017，176：342-358.
[11] 陈炉云，张裕芳，刘勇. 基于材料选型优化的金属－复合材料组合结构-声辐射优化[J].复合材料学报，2013，30（6）：252-257.
Chen Luyun, Zhang Yufang, Liu Yong. Structures-acoustic optimization of hybrid metal-composite structures based on material selection optimization approach[J]. Acta Materiae Compositae Sinica. 2013, 30（6）: 252-257.
[12] 马志超，张用兵，郭万涛，等. 泡沫夹芯复合材料力学性能与水声性能综合设计初探[J].材料开发与应用，2013，28（3）：5-61.
Ma Zhichao, Zhao Yongbing, Guo Wantao, et al. An overall design of foam-core sandwich composite on mechanical and underwater acoustic properties[J]. Development and Application of Materials, 2013, 28(3): 5-61.
[13] 张焱冰，任春雨，朱锡. 基于遗传算法的复合材料圆柱壳水下声辐射优化[J].海军工程大学学报，2014，26（4）：42-45.
Zhang Yanbing, Ren chunyu, Zhu Xi. Optimization of sound radiation from submarine composite cylindrical shell based on genetic algorithm[J]. Journal of Naval University of Engineering, 2014, 26(4): 42-45.
[14] 舒歌群，赵文龙，梁兴雨，等. 约束阻尼结构的振动分析及结构参数优化研究[J].西安交通大学学报，2014，48（3）：108-114.
Shu Gequn, Zhao Wenlong, Liang Xingyu, et al. Vibration analysis and optimization of composite structures with constrained-layer damping treatment[J]. Journal of Xi’an Jiaotong University. 2014, 48(3): 108-114.
[15] 王冲，邱志平，吴迪，等.含区间参数的结构-声耦合系统可靠性优化设计[J].振动工程学报，2014，27（5）：728-733.
Wang Chong, Qiu Zhiping, Wu Di, et al. Reliability-based optimization of coupled structural-acoustic system with interval parameters[J]. Journal of Vibration Engineering. 2014, 27(5): 728-733.
[16] 吴锦武，彭文辉，赵飞. 分层有限元模型下层合板声功率优化设计[J].振动与冲击，2015，34（16）：85-89.
Wu Jinwu, Peng Wenhui, Zhao Fei. Optimal design of acoustic power of laminated composite plate based on layer-wise FEM[J]. Journal of Vibration and Shock. 2015, 34(16): 85-89.
[17] 张雨，向锦武. 复合材料层合厚圆柱壳高阶理论的改进及其应用[J].复合材料学报，2002,19（4）:86-91.
Zhang Yu, Xiang Jinwu. Higher-order theory and its finite element method for thick laminated composite cylindrical shells. Acta Materiae Compositae Sinica, 2002, 19(4): 86-91.
[18] Bert C W, Bake J L, Egle D M. Free vibrations of multilayer anisotropic cylindrical shells[J]. Journal of Composite Materials, 1969, 3: 480-499.
[19] 仝博，李永清，朱锡，张焱冰. 复合材料夹芯圆柱壳水下振动和声辐射的三维弹性解[J].复合材料学报. https://doi.org/10.13801/j.cnki.fhclxb.20180911.005.
Tong Bo, Li Yongqing, Zhu Xi, et al. Three-dimensional elastic solutions for underwater vibration and sound radiation of composite sandwich cylindrical shells[J]. Acta Materiae Compositae Sinica.
[20] 陈炉云，张裕芳，刘勇. 基于材料选型优化的金属复合材料组合结构-声辐射优化[J].复合材料学报，2013，30（6）：252-257.
Chen Luyun, Zhao Yufang, Liu Yong. Structural-acoustic optimization of hybrid metal-composite structure based on material selection optimization approach[J]. Acta Materiae Compositae Sinica, 2013, 30(6): 252-257.
[21] 刘涛. 水中复杂壳体的声-振特性研究[D].上海：上海交通大学，2002.
Research on sound and vibration characteristics of complex cylindrical shell submerged in water [D]. Shang hai：Shanghai Jiaotong University，2002.
[22] Yang Chuanmeng，Jin Guoyong, et al. Vibration and damping analysis of thick sandwich cylindrical shells with a viscoelastic core under arbitrary boundary conditions[J]. International Journal of Mechanical Sciences，2015，92：162-177.
[23] 翟彦春，梁森，付小静.嵌入式共固化复合材料夹芯板结构的自由振动[J].振动与冲击，2017,36（16）：229-233.
Zhai Yanchun, Liang Sen, Fu Xiaojing. Free vibration of a embedded co-cured composite sandwich plate. Journal of Vibration and Shock. 2017, 36(16): 229-233.
[24] 仝博，李永清，朱锡，张焱冰．复合材料夹芯圆柱壳的声辐射性能[J]．材料研究学报，2017，31（6）：458-464.
Tong Bo, Li Yongqing, Zhu Xi, et al. Acoustic Radiation Performance of Composite and Sandwich Shells[J]. Chinese Journal of Materials Research. 2017, 31(6): 458-464.