|
|
Milling cutter breakage detection based on VMD |
WANG Xiangyang,HE Lingsong,WANG Pingjiang,GAO Zhiqiang |
School of Mechanical Science & Engineering, Huazhong University of Science and Technology, Wuhan 430070, China |
|
|
Abstract Aiming at the non-stationary characteristics of the cutting vibration signal in the end milling process, a milling cutter breakage detection method based on variational mode decomposition (VMD) was proposed.The method decomposes the cutting vibration signal into several modal components by VMD.After the milling cutter is broken, the frequency band distribution of different modal components will change, and the center frequency and energy of each modal component are extracted to construct a feature vector.The feature vector was normalized and input to the support vector machine (SVM) for milling cutter breakage detection.Milling experiments under various cutting parameters show that the method can suppress modal mixture and has higher detection accuracy than the EMD-based milling cutter damage detection method.
|
Received: 28 February 2019
Published: 15 August 2020
|
|
|
|
[1] 李锡文,杨明金,谢守勇,等. 基于时域特性的铣刀磨损状态信息提取[J]. 中国机械工程,2007,18(13):1513-1517.
Li Xiwen,Yang Mingjin,Xie Shouyong,et al. Information Extraction of Milling Cutter Wear Condition through Time-domain Method[J]. China Mechanical Engineering,2007,18(13):1513-1517.
[2] 陈勇,周志平,洪小丽. 基于小波分析的刀具破损智能监控系统 [J]. 工具技术,2008,42(7):87-89.
Chen Yong Zhou Zhiping Hong Xiaoli. Intelligent Monitoring System of Tool Breakage Using Wavelet Analysis [J]. Tool Engineering, 2008,42(7):87-89.
[3] 贺彬,刘泉. 基于EMD和SVM的刀具故障诊断[J]. 工具技术,2017,51(01):95-97.
He Bin, Liu Quan. Tool Fault Diagnosis Based on Empirical Mode Decomposition and Support Vector Machine [J]. Tool Engineering, 2017,51(01):95-97.
[4] 陈群涛,石新华,邵华. 基于振动信号EMD和ICA的刀具破损识别[J]. 工具技术,2012,46(12):53-58.
Chen Quntao,Shi Xinhua,Shao Hua .Vibration Signal Processing for Tool Breakage Monitoring Based on EMD and ICA [J]. Tool Engineering ,2012,46(12):53-58.
[5] WU ZH,HUANG NE.Ensemble empirical mode decomposition: a noise-assisted data analysis method[J].Advances in Adaptive Data Analysis,2011, 1( 1) : 1-41.
[6] 杨明伦,邵华. 基于EEMD和IMF能量分布的刀具破损识别[J]. 组合机床与自动化加工技术,2013 (04):54-58.
YANG Minglun,SHAO Hua. Identification of AE Signal for Tool Breakage Monitoring Based on EEMD[J]. Modular Machine Tool & Automatic Manufacturing Technique,2013 (04):54-58.
[7] 江雁,傅攀,李晓晖. 基于EEMD-SVM的刀具磨损状态研究[J]. 中国测试,2016,42(01):87-91.
JIANG Yan,FU Pan,LI Xiaohui Study of tool wear based on EEMD-SVM[J]. China Measurement & Testing Technology,2016,42(01):87-91.
[8] DRAGOMIRETSKIY K,ZOSSO D. Variational mode decomposition[J]. IEEE Transactions on Signal Processing,2014,62( 3) :531-544.
[9] Changfu Liu, Lida Zhu, Chenbing Ni. Chatter detection in milling process based on VMD and energy entropy [J]. Mechanical Systems and Signal Processing, 2018, 105: 169-182.
[10] 王新,闫文源. 基于变分模态分解和SVM的滚动轴承故障诊断[J]. 振动与冲击,2017,36(18):252-256.
WANG Xin,YAN Wenyuan. Fault diagnosis of roller bearings based on the variational mode decomposition and SVM [J]. Journal of Vibration and Shock,2017,36
(18):252-256.
[11] Bo Xu, Fengxing Zhou, Huipeng Li, et al. Early fault feature extraction of bearings based on Teager energy operator and optimal VMD [J]. ISA Transactions,2018.
[12] VAPNIK V. The nature of statistical learning theory[M].New York: Springer-Verlag,1995.
|
|
|
|