某型狙击榴弹发射器橡胶缓冲部件对其发射性能影响研究

PDF(1650 KB)

振动与冲击 ›› 2018, Vol. 37 ›› Issue (23) : 241-246.

论文

赵排航，王瑞林，李永建，贾云非，康小勇

作者信息 +

Effects of rubber buffer unit on launch performance of a sniper grenade launcher

ZHAO Paihang，WANG Ruilin，LI Yongjian，JIA Yunfei，KANG Xiaoyong

Author information +

文章历史 +

摘要

为研究某型狙击榴弹发射器橡胶缓冲部件对其发射性能的影响；通过静载与动载实验研究了橡胶缓冲部件在静载和不同平均应变率下的本构关系，建立了动力学仿真模型；根据仿真结果，分析了自动机、机匣和导轨的运动曲线，对比分析了有无缓冲垫作用下的运动曲线和后坐力曲线；结果表明：该橡胶材料本构模型具有明显的非线性、迟滞特性和应变率效应，随着应变率的增大，材料强度逐渐增大；在橡胶缓冲垫缓冲作用下可有效减小刚性接触对系统造成的影响和后坐力幅值，缓冲垫有效提高了系统的平稳性和人机工效。研究为该武器系统进一步改进打下了良好基础。

Abstract

In order to study effects of rubber cushion on launch performance of a sniper grenade launcher,the constitutive models of the rubber buffer under static load and different average strain rates were studied with static and dynamic loading tests to construct the whole weapon system’s dynamic simulation model.According to the simulation results,the motion curves of automata,cartridge and guide rail were analyzed.These motion curves and the recoil one with or without a cushion were contrastively analyzed.The results showed that the constitutive model of rubber material has obvious nonlinearity,hysteresis and strain rate effect; the material strength gradually increases with increase in strain rate; the buffer action of the rubber cushion can effectively reduce influence of rigid contact on the system and the recoil amplitude; the rubber buffer effectively improves the system stability and ergonomics.The study laid a good foundation for further improvement of this type weapon system.

导出引用

赵排航，王瑞林，李永建，贾云非，康小勇. 某型狙击榴弹发射器橡胶缓冲部件对其发射性能影响研究[J]. 振动与冲击, 2018, 37(23): 241-246

ZHAO Paihang，WANG Ruilin，LI Yongjian，JIA Yunfei，KANG Xiaoyong. Effects of rubber buffer unit on launch performance of a sniper grenade launcher[J]. Journal of Vibration and Shock, 2018, 37(23): 241-246

参考文献

[1] 范智滕，王瑞林，李涛，等. 基于虚拟样机的新型重机枪自动机运动分析[J]. 火炮发射与控制学报，2014，35(2)：20-24.
FAN Zhiteng, WANG Ruilin, LI Tao, et al.Kinematic Analysis of the New Heavy Machine Gun Automaton Based on Virtual Prototype[J]. Journal of Gun Launch & Control,2014, 35(2)：20-24.
[2] 金志明.枪炮内弹道学[M].北京:北京理工大学出版社,2004.
[3] 廖振强,王涛,余世海.武器气体动力学数值计算方法[M].北京:国防工业出版社,2005.
[4] 李永建. 某型机枪结构动力学仿真与参数优化[D]. 石家庄: 军械工程学院, 2007.
[5] 王礼立. 应力波基础[M].北京: 国防工业出版社,1985.
[6] 王娜. 面向汽车耐久性分析的底盘橡胶衬套建模研究[D]. 长春: 吉林大学,2011.
[7] 王文涛,上官文斌,段小成.超弹性本构模型对橡胶隔振器静态特性预测影响的研究[J]. 汽车工程,2012,34( 6):543-550.
WANG Wentao, SHANGGUAN Wenbin. A Study on the Hyperelastic Constitutive Models on the Static Characteristic Prediction of Rubber Isolator [J]. Automotive Engineering, 2012,34 (6): 543-550.
[8] 姚养无,王刚. 浮动自动机动力学参数优化匹配技术研究[J]. 兵工学报,2003,(01):19-22.
YAO Yangwu, WANG Gang. A Study on the Optimal Matching of Dynamic Papameters for A Floating Automatic Mechanism[J]. Acta Armamentarii, 2003 (01): 19-22.
[9] 宋杰,廖振强,李佳圣,肖俊波. 导气与枪管浮动混合式自动机动力学特性研究[J]. 兵工学报,2014,(06):753-761.
SONG Jie, LIAO Zhenqiang, LI Jiasheng, et al. Dynamics Characteristics of Automatic Mechanism for Gas Operated and Floating Barrel Operated Automatic Action[J]. Acta Armamentarii, 2014, (06): 753-761.
[10] 杨洋,王亚平,张伟,徐诚. 手枪射击过程中士兵动态响应特性研究[J]. 振动与冲击, 2016, (11): 7-11.
YANG Yang，WANG Yaping，ZHANG Wei，et al. Dynamic response characteristics of soldiers in pistol shooting process[J]. Journal of vibration and shock, 2016, (11): 7-11.
[11] 范亚夫,魏延鹏,薛跃军等. 数字图像相关测试技术在霍普金森杆加载实验中的应用[J]. 实验力学,2015,(5):590-598.
FAN Yafu, WEI Yangpeng, XUE Yaojun, et al. On the Application of Digital Image Correlation Testing Technology in Hopkinson Bar Loading[J]. Journal of Experimental Mechanics, 2015,(5) :590-598.
[12] 苏灏扬,许金余,白二雷等. 陶瓷纤维混凝土的抗冲击性能试验研究[J]. 建筑材料学报,2013,(2):237-243.
SU Haoyang, XU Jinyu, BAI Erlei, et al. Experimental Study on Anti-impact Performance of Ceramic Fiber Reinforced Concrete[J]. Journal of Building Materials. 2013,(2):237-243.
[13] 陈锦喜, 王瑞林, 张军挪, 等. 基于有限元模型的机枪动态特性优化设计[J]. 振动与冲击. 2012, 31(21): 77-79.
CHEN Jinxi, WANG Ruilin, ZHANG Junnuo, et al. Optimal design for dynamic characteristics of a machine gun based on a finite element model[J]. Journal of Vibration and Shock, 2012, 31(21): 77-79.
[14] 冯伟, 周新聪, 严新平, 等. 接触问题实体建模及有限元法仿真实现[J]. 武汉理工大学学报, 2004, 26(6): 52-55.
FENG Wei, ZHOU Xincong, YAN Xinping, et al. The Entity Modeling of Contact Problem and its Simulation Realization by Finite Element Method[J]. Journal of Wuhan University of Technology, 2004, 26(6): 52-55.
[15] 白争锋,赵阳,赵志刚. 考虑运动副间隙的机构动态特性研究[J]. 振动与冲击,2011,(11):17-20+41.
BAI Zhengfeng, ZHAO Yang, ZHAO Zhigang. Dynamic characteristics of mechanisms with joint clearance[J]. Journal of Vibration and Shock, 2011,(11):17-20+41.