基于自适应加权多尺度组合形态滤波的轴承故障特征提取研究

PDF(3013 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (1) : 245-252.

论文

韩笑乐,胡天中,余建波

作者信息 +

Feature extraction of bearing faults based on adaptive weighted multi-scale combination morphological filtering

HAN Xiaole,HU Tianzhong,YU Jianbo

Author information +

文章历史 +

摘要

针对滚动轴承振动信号在进行早期故障诊断时往往会伴随着噪声干扰的问题，提出了一种选择性自适应加权多尺度组合形态滤波(Adaptive Weighted Multi-scale Combination Morphological Filtering, AWMCMF)方法，从振动信号中提取故障特征。首先，采用三种组合算子构成一组新的形态算子，可有效地提取出信号中的正负冲击特征；其次，基于新算子提出了加权多尺度形态滤波方法，并将Teager能量峭度作为评判指标为各尺度提供优化的权值；最后，将选择性自适应权值与多尺度算子进行加权绑定得到优化的故障特征提取结果。通过仿真信号和轴承故障振动信号的结果表明，该方法能有效地滤除噪声并提取故障特征。

Abstract

Aiming at the problem of vibration signals of rolling bearings being often accompanied by noise interference during early fault diagnosis, a selective adaptive weighted multi-scale combination morphological filtering (AWMCMF) method was proposed to extract fault features from vibration signals. Firstly, 3 types of combined operators were used to form a group of new morphological operators being able to effectively extract positive and negative impact features in vibration signals. Secondly, based on new operators, a weighted multi-scale morphological filtering method was proposed, and Teager energy kurtosis was taken as the evaluation index to provide optimized weights for various scales. Finally, the weighted binding was performed for selective adaptive weights and multi-scale operators to obtain the optimized fault feature extraction results. The results of simulated signals and bearing faulty vibration signals showed that the proposed method can be used to effectively filter noise and extract fault features.



导出引用

韩笑乐,胡天中,余建波. 基于自适应加权多尺度组合形态滤波的轴承故障特征提取研究[J]. 振动与冲击, 2020, 39(1): 245-252

HAN Xiaole,HU Tianzhong,YU Jianbo. Feature extraction of bearing faults based on adaptive weighted multi-scale combination morphological filtering[J]. Journal of Vibration and Shock, 2020, 39(1): 245-252

参考文献

[1] Serra J, Vincent L. An overview of morphological filtering[J]. Circuits Systems and Signal Processing, 1992, 11(1): 47-108.
[2] Maroagos P, Schafer R W. Morphological filters-Part I: Their set-theoretic analysis and relations to linear shift-invariant filters[J]. IEEE Transactions on Acoustics Speech & Signal Processing, 1987, 35(8): 1153-1169.
[3] 沈路, 周晓军, 张文斌, 等. 广义数学形态滤波器的旋转机械振动信号降噪[ J]. 振动与冲击, 2009, 28(9): 70-73.
SHEN Lu, ZHOU Xiao-jun, ZHANG Wen-bin, et al. De-noising for vibration signals of a rotating machinery based on generalized mathematical morphological filter[J]. Journal of Vibration and Shock, 2009, 28(9): 70-73.
[4] Dong Y, Liao M, Zhang X, et al. Fault diagnosis of rolling element bearing based on modified morphological method[J]. Mechanical Systems and Signal Processing, 2011, 25(4): 1276-1286.
[5] Lv J, Yu J. Average combination difference morphological filters for fault feature extraction of bearing[J]. Mechanical Systems and Signal Processing, 2018, 100: 827-845.
[6] 卢志才, 米东, 徐章遂, 等. 多尺度多元素形态滤波自适应降噪研究[J]. 河北科技大学学报, 2011, 32(3): 228-251.
LU Zhi-cai, MI Dong, XU Zhang-sui, et al. Research in application of multi-scale and multi-element morphological filtering in geomagnetic orientation[J]. Journal of Heibei University of Science and Technology, 2011, 32(3): 228-251.
[7] 胡爱军, 唐贵基, 安连锁. 基于数学形态学的旋转机械振动信号降噪方法[J]. 机械工程学报, 2006, 42(4): 127-130.
HU Ai-jun, TANG Gui-ji, AN Lian-suo. De-noising technique for vibration signals of rotating machinery based on mathematical morphology filter[J]. Chinese journal of mechanical engineering, 2006, 42(4): 127-130.
[8] Ginolhac G, Chanussot J. Morphological and statistical approaches to improve detection in the presence of reverberation[J]. IEEE Journal of Oceanic Engineering, 2005, 30(4): 881-899.
[9] Li B, Zhang P, Wang Z, et al. A weighted multi-scale morphological gradient filter for rolling element bearing fault detection[J]. ISA Transactions, 2011, 50(4): 599-608.
[10] 韩立静，阳建宏，黎敏, 等. 加权多尺度形态滤波在轴承故障诊断中的应用[J]. 机械设计与制造, 2012(10): 68-70.
HAN Li-jin, YANG Jian-hong, LI Min, et al. Application of weighted multi-scale morphological filter in fault diagnosis of bearings[J]. Machinery Design & Manufacture, 2012(10): 68-70.
[11] 董绍江, 汤宝平, 陈法法. 粒子群优化的多尺度形态滤波器消噪方法[J]. 重庆大学学报, 2012, 35(7): 7-12.
DONG Shao-jiang, TANG Bao-ping, CHEN Fa-fa. De-nosing method based on multiscale morphological filter optimized by particle swarm optimization algorithm[J]. Journal of Chongqing University, 2012, 35(7): 7-12.
[12] Meng L, Xiang J, Zhong Y, et al. Faults diagnosis of rolling bearing based on second generation wavelet denoising and morphological filter[J]. Journal of Mechanical Science and Technology, 2015, 29(8): 3121-3129.
[13] 李兵, 高敏, 张旭光, 等. 用形态梯度法与非负矩阵分解的齿轮故障诊断[J]. 振动、测试与诊断, 2014, 34(2): 295-300.
LI Bin, GAO Min, ZHANG Xu-guang, et al. Feature extraction for engine fault diagnosis by utilizing adaptive multi-scale morphological gradient and non-negative matrix factorization[J]. Journal of Vibration, Measurement & Diagnosis, 2014, 34(2): 295-300.
[14] Meng L, Xiang J, Wang Y, et al. A hybrid diagnosis method using morphological filter-translation invariant wavelet and improved ensemble empirical mode decomposition[J]. Mechanical Systems and Signal Processing, 2015, 50-51: 101-115.
[15] 武哲, 杨绍普, 张建超. 基于LMD自适应多尺度形态学和Teager能量算子方法在轴承故障诊断中的应用[J]. 振动与冲击, 2016, 35(3): 7-13.
WU Zhe, YANG Shao-pu, ZHANG Jian-chao. Bearing fault feature extraction method based on LMD adaptive multiscale morphology and energy operator demodulating[J]. Journal of Vibration and Shock, 2016, 35(3): 7-13.
[16] 王天金, 冯志鹏, 郝如江, 等. 基于Teager能量算子的滚动轴承故障诊断研究[J]. 振动与冲击, 2012, 31(2): 1-5.
WANG Tian-jin, FENG Zhi-peng, HAO Ru-jiang, et al. Fault diagnosis of rolling element bearings based on Teager energy operator[J]. Journal of Vibration and Shock, 2012, 31(2): 1-5.
[17] Yao L, Wang F, Han S. Fault Diagnosis of Hoist Braking System Based on Improved Particle Swarm Optimization Algorithm[C]// Chinese Intelligent Systems Conference, Singapore: Springer, 2017. 31-41.
[18] Case western reserve university bearing data enter download a data file[EB/OL]. http://csegroups.case.edu/ bearingdatacenter/pages/download-data-file, 2012-08-20.
[19] 李兵, 张培林, 刘东升, 等. 基于自适应多尺度形态梯度变换的滚动轴承故障特征提取[J]. 振动与冲击, 2011, 30(10): 104-108.
LI Bing, ZHANG Pei-lin, LIU Dong-sheng, et al. Feature extraction for roller bearing fault diagnosis based on adaptive multi-scale morphological gradient transformation[J]. Journal of Vibration and Shock, 2011, 30(10): 104-108.
[20] Li Y, Liang X, Lin J, et al. Train axle bearing fault detection using a feature selection scheme based multi-scale morphological filter[J]. Mechanical Systems and Signal Processing, 2018, 101: 435-448.
[21] 邓飞跃, 杨绍普, 郭文武, 等. 基于自适应多尺度形态学AVG-Hat滤波的滚动轴承故障特征提取方法[J]. 振动工程学报, 2017, 30(6): 1056-1065.
DENG Fei-yue, YANG Shao-pu, GUO Wen-wu, et al. Fault feature extraction method for rolling bearing based on adaptive multi-scale morphological AVG-Hat filtering[J]. Journal of Vibration Engineering, 2017, 30(6): 1056-1065.
[22] Li Y, Liang X, Zuo M. Diagonal slice spectrum assisted optimal scale morphological filter for rolling element bearing fault diagnosis[J]. Mechanical Systems and Signal Processing, 2017, 85: 146-161.
