一种基于Seth应变张量的超弹性模型

PDF(1315 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (2) : 227-233.

论文

一种基于Seth应变张量的超弹性模型

赵子涵1,2，穆希辉1，杜峰坡1

作者信息 +

New hyperelastic model based on seth strain tensor

ZHAO Zihan1,2, MU Xihui1, DU Fengpo1

Author information +

文章历史 +

摘要

为精确表征橡胶类材料在大变形范围内的力学行为，基于Seth应变张量不变量提出了一种适用于橡胶类材料的不可压缩各向同性超弹性模型。为考察其预测能力，分别利用Treloar经典试验数据和某型炭黑填充橡胶试验数据对该模型、Yeoh模型和二阶多项式模型进行了参数识别。结果表明，在同时使用单轴拉伸和等双轴拉伸试验数据情况下，相较于其他两种常用模型，该模型能够更准确地拟合两种橡胶材料的试验数据，并较好地预测纯剪切（或平面拉伸）试验数据。最后，分别基于前述三种超弹性模型对橡胶衬套进行了静刚度仿真计算和试验验证。结果表明，基于所提出的超弹性模型得到的径向刚度和轴向刚度仿真误差分别为6.61%和9.72%，显著小于基于其他两种模型得到的仿真误差。因此，提出的模型在一定误差范围内能够有效适用于橡胶产品的性能分析。该模型仅含4个材料参数，对不同的橡胶材料有较好地适用性，具有良好的工程应用价值。

Abstract

Based on the Seth strain tensor invariant, a new hyperelastic model for isotropic and incompressible rubber-like materials was proposed, which can describe the mechanical behavior of the rubber-like material over a large range accurately.In order to investigate its applicability and accuracy, the parameters of the proposed model, as well as the Yeoh model and the second-order polynomial model were identified by using Treloar classical data and carbon black filled rubber test data respectively.The results show that only the proposed model can reliably fit the test data of two different rubber-like materials in uniaxial tension and equibiaxial tension tests while others cannot.Finally, based on the three hyperelastic models mentioned above, the finite element analysis and experiment verification on the static stiffness of a rubber bushing were carried out.As compared with experimental data, the simulation errors of radial stiffness and axial stiffness based on the proposed model are 6.61% and 9.72% respectively, which are significantly smaller than those based on other two models.Therefore, the proposed model can be applied to the performance analysis of rubber products.The proposed model merely includes four material parameters,so, it can be used widely for various rubber-like materials and has good engineering value.

导出引用

赵子涵1,2，穆希辉1，杜峰坡1. 一种基于Seth应变张量的超弹性模型[J]. 振动与冲击, 2020, 39(2): 227-233

ZHAO Zihan1,2, MU Xihui1, DU Fengpo1. New hyperelastic model based on seth strain tensor[J]. Journal of Vibration and Shock, 2020, 39(2): 227-233

参考文献

[1] 危银涛, 冯希金, 郑小刚, 等. 乘用车子午线轮胎泵浦噪声机理的实验-数值混合分析方法[J]. 振动与冲击, 2015,34(11):166-172.
WEI Yin-tao, FENG Xi-jin, ZHENG Xiao-gang, et al. A hybrid experimental-numerical analysis for radial tire air pumping noise generation mechanism[J]. Journal of Vibration and Shock, 2015,34(11):166-172.
[2] 周振凯, 徐兵, 胡文军, 等. 橡胶隔振器大变形有限元分析[J]. 振动与冲击, 2013,32(05):171-175.
ZHOU Zhen-kai, XU Bing, HU Wen-jun, et al. Large deformation finite element analysis of rubber isolator[J]. Journal of Vibration and Shock, 2013,32(05):171-175.
[3] 赵子涵, 穆希辉, 郭浩亮, 等. 橡胶履带轮静态接地压力测试与建模[J]. 农业工程学报, 2018(3):72-79.
ZHAO Zihan, MU Xihui, GUO Haoliang, et al. Test and modeling on static ground pressure of rubber track conversion system[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018(3):72-79.
[4] Hossain M, Steinmann P. More hyperelastic models for rubber-like materials: consistent tangent operators and comparative study[J]. Journal of the Mechanical Behavior of Materials, 2013,22(1-2):27-50.
[5] Steinmann P, Hossain M, Possart G. Hyperelastic models for rubber-like materials: consistent tangent operators and suitability for Treloar's data[J]. Archive of Applied Mechanics, 2012,82(9):1183-1217.
[6] Yaya K, Bechir H. A new hyper-elastic model for predicting multi-axial behaviour of rubber-like materials: formulation and computational aspects[J]. Mechanics of Time-Dependent Materials, 2018,22(2):167-186.
[7] Khiêm V N, Itskov M. Analytical network-averaging of the tube model.Rubber elasticity[J]. Journal of the Mechanics & Physics of Solids, 2016,95:254-269.
[8] Zhao F. Continuum Constitutive Modeling for Isotropic Hyperelastic Materials[J]. Advances in Pure Mathematics, 2016,06(09):571-582.
[9] Bechir H, Chevalier L, Chaouche M, et al. Hyperelastic constitutive model for rubber-like materials based on the first Seth strain measures invariant[J]. European Journal of Mechanics - A/Solids, 2006,25(1):110-124.
[10] Lin B. A new model for hyperelasticity[J]. Acta Mechanica, 2009,208(1-2):39-53.
[11] Xiao H. Elastic potentials with best approximation to rubberlike elasticity[J]. Acta Mechanica, 2015,226(2):331-350.
[12] Yuan L, Gu Z, Yin Z, et al. New compressible hyper-elastic models for rubberlike materials[J]. Acta Mechanica, 2015,226(12):4059-4072.
[13] 李雪冰, 危银涛. 一种改进的Yeoh超弹性材料本构模型[J]. 工程力学, 2016,33(12):38-43.
LI Xue-bing, WEI Yin-tao. An improved Yeoh constitutive model for hyperelastic material[J]. Engineering Mechanics, 2016,33(12):38-43.
[14] 于海富, 李凡珠, 杨海波, 等. 橡胶材料的混合高弹性本构模型研究[J]. 橡胶工业, 2018(05):509-513.
YU Haifu, LI Fanzhu, YANG Haibo, et al. Study on hybrid hyperelastic constitutive model for rubber material[J]. China Rubber Industry, 2018(05):509-513.
[15] 魏志刚, 陈海波. 一种新的橡胶材料弹性本构模型[J]. 力学学报, 2019,51(02):473-483.
WEI Zhigang, CHEN Haibo. A new elastic model for rubber-like materials[J]. Chinese Journal of Theoretical and Applied Mechanics, 2019,51(02):473-483.
[16] 黄宗宝. 张量和连续介质力学[M]. 北京: 冶金工业出版社, 2012.
HUANG Zongbao. Tensor and continuum mechanics[M]. Beijing: Metallurgical Industry Press, 2012.
[17] Horgan C O, Smayda M G. The importance of the second strain invariant in the constitutive modeling of elastomers and soft biomaterials[J]. Mechanics of Materials, 2012,51:43-52.
[18] Yaya K, Bechir H, Bremand F. Implementation of new strain-energy density function for a grade of carbon black-filled natural rubber in finite element ~1: International Conference on Adavances in Mechanical Engineering and Mechanics, Hammamet,Tunisia, 2015[C].
[19] 朱海东. 关于Hill应变率及其共轭应力的一般表达式[D]. 南昌: 南昌大学, 2006.
ZHU Haidong. A Representation formula for time rate and conjugate stress of an arbitrary Hill's strain[D]. Nanchang: Nanchang University, 2006.
[20] Ogden R W. Large deformation isotropic elasticity: on the correlation of theory and experiment for compressible rubberlike solids[J]. Proc. R. Soc. Lond., Ser. A, Math. Phys. Eng. Sci., 1972(328):565-584.
[21] Valanis K C, Landel R F. The Strain‐Energy Function of a Hyperelastic Material in Terms of the Extension Ratios[J]. Journal of Applied Physics, 1967,38(7):2997-3002.
[22] Farahani K, Bahai H. Hyper-elastic constitutive equations of conjugate stresses and strain tensors for the Seth–Hill strain measures[J]. International Journal of Engineering Science, 2004,42(1):29-41.
[23] Beda T. An approach for hyperelastic model-building and parameters estimation a review of constitutive models[J]. European Polymer Journal, 2014,50:97-108.
[24] Carroll M M. A Strain Energy Function for Vulcanized Rubbers[J]. Journal of Elasticity, 2011,103(2):173-187.
[25] Treloar L R G. Stress-Strain Data for Vulcanized Rubber under Various Types of Deformation[J]. Transactions of the Faraday Society, 1944,40(2):59-70.
[26] 赵永玲. 隔振橡胶特性表征与橡胶悬架结构优化[D]. 北京: 清华大学, 2016.
ZHAO Yongling. Vibration isolation rubber characterization and rubber suspension structural optimization[D]. Beijing: Tsinghua University, 2016.
[27] 胡小玲, 刘秀, 李明, 等. 炭黑填充橡胶超弹性本构模型的选取策略[J]. 工程力学, 2014,31(05):34-42.
HU Xiaoling, LIU Xiu, LI Ming, et al. Selected strategied of hyperelastic constitutive models for carbon black filled rubber[J]. Engineering Mechanics, 2014,31(05):34-42.
[28] 魏志刚, 陈效华, 吴沈荣, 等. 橡胶衬套材料参数确定及有限元仿真[J]. 机械工程学报, 2015,51(08):137-143.
WEI Zhigang, CHEN Xiaohua, WU Shenrong, et al. Material parameters determination and simulation of rubber bushing[J]. Journal of Mechanical Engineering, 2015,51(08):137-143.