风力发电机轴承复合故障特征提取方法研究

PDF(1240 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (9) : 144-151.

论文

风力发电机轴承复合故障特征提取方法研究

向玲，李营

作者信息 +

Feature extraction method for bearing composite faults of a wind turbine

XIANG Ling, LI Ying

Author information +

文章历史 +

摘要

针对较强背景噪声干扰下的风力发电机轴承复合故障特征难以准确提取的问题，提出了基于自适应最大相关峭度解卷积(AMCKD)的风力发电机轴承复合故障特征提取的方法。首先，利用人工鱼群算法(AFSA)以解卷积信号包络谱的相关峭度值为目标函数对最大相关峭度解卷积算法(MCKD)的影响参数自适应寻优；然后，将影响参数优化的MCKD对原始故障信号进行解卷积处理，对解卷积信号进行包络谱分析，通过包络谱中的主导频率成分与轴承各元件的故障特征频率相对比，准确实现轴承复合故障的诊断。仿真和工程应用实例验证了所提方法的有效性与实用性。

Abstract

Aiming at the problem that the complex fault characteristics of wind turbine bearings under strong background noise are difficult to accurately extract, a method based on adaptive maximum correlation kurtosis deconvolution (AMCKD) for the wind turbine bearing composite fault feature extraction was proposed.Using the artificial fish swarm algorithm (AFSA), and taking the correlated kurtosis of the deconvoluted signal envelope spectrum as an objective function, the influential parameters of the maximum correlation kurtosis deconvolution algorithm (MCKD) were adaptively optimized.Then, the optimized MCKD was used to deconvolute the original fault signal, and an envelope spectrum analysis was performed on the deconvoluted signal.Through the comparison of the dominant frequency components in the envelope spectrum with the fault characteristic frequency of each component of the bearing, the diagnosis of the bearing composite faults was accurately realized.Simulation and engineering application examples verify the effectiveness and practicability of the proposed method.

导出引用

向玲，李营. 风力发电机轴承复合故障特征提取方法研究[J]. 振动与冲击, 2020, 39(9): 144-151

XIANG Ling, LI Ying. Feature extraction method for bearing composite faults of a wind turbine[J]. Journal of Vibration and Shock, 2020, 39(9): 144-151

参考文献

[1] Teng W , Ding X , Zhang Y , et al. Application of cyclic coherence function to bearing fault detection in a wind turbine generator under electromagnetic vibration[J]. Mechanical Systems & Signal Processing, 2017, 87. [2] Li J, Li M, Zhang J, et al. Frequency-shift multiscale noise tuning stochastic resonance method for fault diagnosis of generator bearing in wind turbine[J]. Measurement, 2019, 133: 421-432. [3] IEEE Motor Reliability Working Group. "Report of large motor reliability survey of industrial and commercial installations, Part I." IEEE Trans. Ind. App. 21.4 (1985): 853-864. [4] Bonnett, Austin H., and George C. Soukup. "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors." IEEE Transactions on Industry applications 28.4 (1992): 921-937. [5] Chen J, Pan J, Li Z, et al. Generator bearing fault diagnosis for wind turbine via empirical wavelet transform using measured vibration signals[J]. Renewable Energy, 2016, 89: 80-92. [6] He S, Chen J, Zhou Z, et al. Multifractal entropy based adaptive multiwavelet construction and its application for mechanical compound-fault diagnosis[J]. Mechanical Systems and Signal Processing, 2016, 76: 742-758. [7] Wang Y, He Z, Zi Y. Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform[J]. Mechanical Systems and Signal Processing, 2010, 24(1): 119-137. [8] Teng W, Ding X, Zhang X, et al. Multi-fault detection and failure analysis of wind turbine gearbox using complex wavelet transform[J]. Renewable Energy, 2016, 93:591-598. [9] 王晓冬, 何正嘉, 訾艳阳. 多小波自适应构造方法及滚动轴承复合故障诊断研究[J]. 振动工程学报, 2010, 23(4):438-444. Wang Xiaodong, He Zhengjia, Yan Yanyang. Multi-wavelet adaptive construction method and composite fault diagnosis of rolling bearings[J]. Journal of Vibration Engineering, 2010, 23(4): 438-444. [10] Chen G, Qie L, Zhang A, et al. Improved CICA algorithm used for single channel compound fault diagnosis of rolling bearings[J]. Chinese Journal of Mechanical Engineering, 2016, 29(1): 204-211. [11] 明安波, 褚福磊, 张炜. 滚动轴承复合故障特征分离的小波-频谱自相关方法[J]. 机械工程学报, 2013, 49(3):80-87. Ming Anbo, Zhai Fulei, Zhang Wei. Wavelet-spectral autocorrelation method for composite fault feature separation of rolling bearings[J]. Journal of Mechanical Engineering, 2013, 49(3): 80-87. [12] 马新娜, 杨绍普. 滚动轴承复合故障诊断的自适应方法研究[J]. 振动与冲击, 2016, 35(10):145-150. MA Xin-na, YANG Shao-pu. Research on Adaptive Method for Composite Fault Diagnosis of Rolling Bearings[J]. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(10): 145-150. [13] He D, Wang X, Li S, et al. Identification of multiple faults in rotating machinery based on minimum entropy deconvolution combined with spectral kurtosis[J]. Mechanical Systems and Signal Processing, 2016, 81: 235-249. [14] McDonald G L, Zhao Q, Zuo M J. Maximum correlated Kurtosis deconvolution and application on gear tooth chip fault detection[J]. Mechanical Systems and Signal Processing, 2012, 33: 237-255. [15] 唐贵基, 王晓龙. 自适应最大相关峭度解卷积方法及其在轴承早期故障诊断中的应用[J]. 中国电机工程学报, 2015, 35(6):1436-1444. Tang Guiji, Wang Xiaolong. Adaptive Maximum Correlation Kurtosis Deconvolution Method and Its Application in Early Fault Diagnosis of Bearings[J]. Proceedings of the CSEE, 2015, 35(6):1436-1444. [16] Jia F , Lei Y , Shan H , et al. Early fault diagnosis of bearings using an improved spectral kurtosis by maximum correlated kurtosis deconvolution[J]. Sensors (Switzerland), 2015, 15(11):29363-29377. [17] 刘尚坤, 唐贵基, 何玉灵. Teager能量算子结合MCKD的滚动轴承早期故障识别[J]. 振动与冲击, 2016, 35(15):98-102. Liu Shangkun, Tang Guiji, He Yuling. Early Fault Identification of Rolling Bearings with Teager Energy Operator and MCKD[J]. Journal of Vibration and Shock, 2016, 35(15): 98-102. [18] Miao Y, Zhao M, Lin J, et al. Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings[J]. Mechanical Systems and Signal Processing, 2017, 92: 173-195. [19] Li X. An optimizing method based on autonomous animats: fish-swarm algorithm[J]. Systems Engineering-Theory & Practice, 2002, 22(11): 32-38. [20] Shen W, Guo X, Wu C, et al. Forecasting stock indices using radial basis function neural networks optimized by artificial fish swarm algorithm[J]. Knowledge-Based Systems, 2011, 24(3): 378-385. [21] Zhu J, Wang C, Hu Z, et al. Adaptive variational mode decomposition based on artificial fish swarm algorithm for fault diagnosis of rolling bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(4): 635-654. [22] Antoni J, Bonnardot F, Raad A, et al. Cyclostationary modelling of rotating machine vibration signals[J]. Mechanical systems and signal processing, 2004, 18(6): 1285-1314.