变时滞反馈散料加工系统的参数设计

PDF(1484 KB)

振动与冲击 ›› 2022, Vol. 41 ›› Issue (6) : 229-235.

论文

变时滞反馈散料加工系统的参数设计

陈宁，张红兵，李万祥，李雄兵

作者信息 +

Parameter design of bulk material machining system with variable delay feedback

CHEN Ning， ZHANG Hongbing， LI Wanxiang， LI Xiongbing

Author information +

文章历史 +

摘要

为保证散料加工系统的稳定性，提出针对变时滞振动系统的参数设计方法。系统中物料堆积会影响生产速度和加工单元的质量，物料经过自由落体运动后对加工单元产生冲击，采用加工单元的沉降位移信号实现对物料供给速度的负反馈调节，形成变时滞反馈环节。首先根据系统的动力学微分方程，研究系统的静平衡稳定状态。然后利用系统发生Hopf分叉的条件，确定了能够保证系统稳定的刚度系数和阻尼系数的参数范围。最后利用SIMULINK仿真验证了理论分析，据此选择出的参数使得系统具备一定的抗干扰能力。利用分叉点的特征值特点，反推确定参数的可选择范围，可为变时滞类系统的参数设计提供参考方法。

Abstract

A parameter design method for variable time-delay vibration system was proposed to ensure the stability of bulk machining system. In this system the materials accumulation affects production speed and processing unit weight, the material impacts the processing unit after free falling, the settlement displacement signal of the processing unit is used to complete the negative feedback regulation of the material supply speed and a variable time delay feedback link is formed. Firstly, the static equilibrium and stability of the system was studied according to the dynamic differential equation of the system. Then, the parameters range of stiffness coefficient and damping coefficient which can ensure the stability of the system was solved by using the condition of Hopf bifurcation. Finally, the theoretical analysis was verified with Simulink simulation, and the selected parameters make the system have certain anti-interference ability. Using the eigenvalue characteristics of bifurcation points to determine the selectable range of parameters could provide a reference method for the parameter design of variable time-delay systems.

导出引用

陈宁，张红兵，李万祥，李雄兵. 变时滞反馈散料加工系统的参数设计[J]. 振动与冲击, 2022, 41(6): 229-235

CHEN Ning， ZHANG Hongbing， LI Wanxiang， LI Xiongbing. Parameter design of bulk material machining system with variable delay feedback[J]. Journal of Vibration and Shock, 2022, 41(6): 229-235

参考文献

[1] 魏   放, 叶国晨, 唐跃跃, 等. 模具钢粉末进料速度对振动筛的影响[J]. 煤炭科技, 2020, 41(06): 35-38.
WEI Fang, YE Guo-chen, TANG Yue-yue, et al. Influence of feeding speed of die steel powderon vibrating screen[J]. Coal Science & Technology Magazine, 2020, 41(06): 35-38.
[2] 夏绪辉, 荆为民, 张泽琳,等. 振动筛仿真研究、应用现状及发展趋势[J]. 中南大学学报(自然科学版), 2020, 51(10): 2689-2706.
XIA Xu-hui, JING Wei-min, et al. Simulation research、application status and development trend of vibrating screen[J]. Journal of Central South University (Science and Technology), 2020,51(10): 2689-2706.
[3] Van Wiggeren G D, Roy R. Chaotic communication using time-delayed optical systems[J]. International Journal of Bifurcation and Chaos, 1999, 9 (11) :2129-2156.
[4] 茅晓晨. 时滞耦合系统动力学的研究进展[J]. 动力学与控制学报, 2017, 15(04): 295-306.
MAO Xiao-chen. Advances in dynamics for coupled system with time delays[J]. Journal of Dynamics and Control, 2017,15(04):295-306.
[5] 刘显波, 何恩元, 龙新华, 等. 时滞作用下切削系统的时频响应特性研究[J]. 振动与冲击,2020,39(06).
LIU Xian-bo, HE En-yuan, LONG Xin-hua, et al. Time and frequency domain characteristics of a cutting system with time-delay effects[J]. Journal of Vibration and Shock, 2020,39(06):8-14+58.
[6] 李   欣, 李亮, 何宁, 等. 时滞效应对铣削系统稳定性的影响[J]. 振动.测试与诊断, 2014, 34(02): 301-305+398.
        LI Xin, LI Liang, HE Ning, et al. Influence of delay time on milling system stability[J]. Journal of Vibration, Measurement & Diagnosis, 2014, 34(02):301-305+398.
[7] 陈功, 肖敏, 万佑红, 等. 分数阶时滞传染病模型的传播动力学[J/OL]. 控制理论与应用: 1-7 [2021-07-28].
CHEN Gong, XIAO Min, WAN You-hong, et al. Propagation dynamics of fractional order delay epidemic model[J]. Control Theory & Applications, 1-7[2021-07-28].
[8] 陈实, 肖敏, 周颖, 等.一类具有饱和发生率的时滞恶意病毒传播模型的Hopf分岔[J]. 南京理工大学学报, 2021, 45(03): 320-325+331.
        CHEN Shi, XIAO Min, ZHOU Ying, et al. Hopf bifurcation of malicious virus spreading model with time delays and saturated incidence rate[J]. Journal of Nanjing University of Science and Technology, 2021,45(03):320-325+331.
[9]   Mann Manyombe M L, Mbang J, Chendjou G. Stability and Hopf bifurcation of a CTL-inclusive HIV-1 infection model with both viral and cellular infections, and three delays[J]. Chaos, Solitons and Fractals: the interdiscipli-nary journal of Nonlinear Science, and Nonequilibrium and Complex Phenomena, 2021, 144.
[10]方辉平. 一类具有密度制约的时滞捕食与被捕食系统解的稳定性分析[J]. 黄山学院学报, 2020, 22(05): 1-3.
FANG Hui-ping. Analysis on the Stability of Solutions for a Predator-prey System with Delay and Density Constraints[J]. Journal of Huangshan University, 2020, 22 (05):1-3.
[11] Bilazeroğlu Ş, Merdan H. Hopf bifurcations in a class of reaction-diffusion equations including two discrete time delays: An algorithm for determining Hopf bifurcation, and its applications[J]. Chaos, Solitons and Fractals: the interdisciplinary journal of Nonlinear Science, and Nonequilibrium and Complex Phenomena,2021,142:
[12] 汪佳佳, 蔡英凤, 陈龙, 等. 基于随机通信时滞补偿的混合动力汽车协调控制研究[J]. 北京理工大学学报, 2020, 40(12): 1332-1339.
WANG Jia-jia, CAI Ying-feng, CHEN Long, et al. Coordinated Control of Hybrid Electric Vehicle Based on Stochastic Network Delay Compensation[J]. Transactions of Beijing Institute of Technology, 2020, 40(12): 1332-1339.
[13] 赵艳影, 黄小卫. 高速列车半主动悬挂系统的振动及主动控制[J]. 科学技术与工程,2020,20(28):11794-11802.
ZHAO Yan-ying, HUANG Xiao-wei. Vibration and Active Control of Semi-active Suspension System of Railway High-speed Train[J]. Science Technology and Engineering, 2020,20(28):11794-11802.
[14] 吴燕, 王宝贤. 时滞基因调控网络的稳定性与分叉分析[J]. 三峡大学学报(自然科学版),2018,40(04):87-91.
WU Yan, WANG Bao-xian. Stability and Bifurcation Analysis of Genetic Regulatory Networks with Time Delays[J]. Journal of China Three Gorges University (Natural Sciences), 2018,40(04):87-91.
[15] 周帅, 肖敏, 邢蕊桃,等. 非对称双环神经网络系统的稳定性和Hopf分岔[J]. 南京信息工程大学学报(自然科学版), 2019, 11(04): 446-452.
ZHOU Shuai, XIAO Min, XING Rui-tao, et al. Stability and Hopf bifurcation of asymmetric double-ring structured neural network[J]. Journal of Nanjing University of Information Science & Technology (Natural Science Edition), 2019, 11(04): 446-452.
[16]王在华, 胡海岩. 时滞动力系统的稳定性与分岔:从理论走向应用. 力学进展,2013,43(1):1~20.
WANG Zai-Hua, HU Hai-Yan. Stability and bifurcation of delayed dynamics systems: From theory to application[J]. Advances in Mechanics, 2013, 43(1):1~20.