滑动型三维隔震装置双向加载试验及力学性能相关性分析

摘要
图/表
参考文献(12)
相关文章 (15)

全文: PDF (1659 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

介绍一种滑动型三维隔震装置，提出考虑参数影响性的滞回模型，并给出装置承载变形相关性公式。对滑动型三维隔震模型装置进行双向加载试验，得到不同加载工况下装置的滞回性能，并与单向加载试验结果进行对比分析。试验结果表明：滑动型三维隔震装置实现了竖向与水平向性能的解耦，双向加载结果与单向加载结果接近，可实现良好的耗能效果。进一步探究装置摩擦因数及倾斜角度对竖向力学性能的影响，采用ABAQUS建立滑动型三维隔震装置有限元模型，分析不同角度及摩擦因数组合条件下装置的竖向力学性能变化趋势，并给出装置合理倾斜角度的设计范围公式，以期为滑动型三维隔震装置在实际工程中的设计及应用提供参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘文光1
	梅晓晨1
	许浩1
	徐鸿飞2

关键词 ：三维隔震装置, 双向加载, 滞回模型, 有限元模拟, 参数分析

Abstract：

A sliding type three-dimensional seismic isolator was introduced.A hysteretic model considering the influence of parameters was proposed, and a loading-deformation correlation formula was presented.Model isolators were tested under bidirectional loading, and the hysteretic properties under different loading conditions were obtained and compared with those by the uniaxial loading test.The results show that the sliding type isolator can make the vertical and horizontal properties decoupled, and the results of bidirectional loading are close to those of uniaxial loading, which can achieve good energy dissipation effect.To further explore the influences of friction coefficient and inclination angle of the isolator on its vertical mechanical properties, a finite element model of the sliding type 3D seismic isolator was established by ABAQUS.The vertical mechanical properties under different combinations of angle and friction coefficient were analyzed.The design range of reasonable inclination angle was given so as to provide a reference for the design and application of the sliding type 3D seismic isolator in practical engineering.

Key words： 3D seismic isolator bidirectional loading hysteretic model finite element simulation parameter analysis

收稿日期: 2019-10-08 出版日期: 2021-01-28

引用本文:

刘文光1，梅晓晨1，许浩1，徐鸿飞2. 滑动型三维隔震装置双向加载试验及力学性能相关性分析[J]. 振动与冲击, 2021, 40(2): 49-56.
LIU Wenguang1，MEI Xiaochen1，XU Hao1，XU Hongfei2. Bidirectional loading test and mechanical properties correlation analysis of a sliding type three-dimensional seismic isolator. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(2): 49-56.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2021/V40/I2/49

[1] 魏陆顺，刘雷斐，梁欢文. 三维隔震振动台试验研究[J]. 土木工程学报，2014, 47(3): 33-38.
WEI Lushun, LIU Leifei, LIANG Huanwen. Experimental study on three-dimensional seismic isolation[J]. China Civil Engineering Journal. 2014, 47(3): 33-38.
[2] 贾俊峰, 欧进萍. 近断层竖向地震动峰值特征[J]. 地震工程与工程振动，2009, 29(1): 44-49.
JIA Junfeng, OU Jinping. Peak amplitude characteristic of vertical seismic ground motions in near-fault regions[J]. Earthquake Engineering and Engineering Dynamics, 2009, 29(1): 44-49.
[3] 周福霖, 崔鸿超，安部重孝等. 东日本大地震灾害考察报告[J]. 建筑结构, 2012, 42(4):1-20.
ZHOU Fulin, CUI Hongchao, Shigetaka ABE, et al. Inspection report of the disaster of the East Japan earthquake by Sino-Japanese joint mission[J]. Building Structure, 2012, 42(4): 1-20.
[4] 日本建筑学会著. 隔震结构设计[M]. 刘文光译. 北京: 地震出版社, 2006.
Architectural Society of Japan. Recommendation for the design of base isolated buildings[M]. LIU Wenguang Translation. Beijing: Seismological Press, 2006.
[5] Huffmann G K. Full base isolation for earthquake protection by helical springs and viscodampers[J]. Nuclear Engineering and Design, 1985, 84(2): 331-338.
[6] Shimada T, Kashiwazaki A, Fujiwaka T, et al. 103 Study on three dimensional seismic isolation system for next generation nuclear power plant : hydraulic three-dimensional base isolation system[C]// 13th World Conference on Earthquake Engineering. The Japan Society of Mechanical Engineers, 2004: 634-8.
[7] Warn G P, Vu B. Exploring the low shape factor concept to achieve three-dimensional seismic isolation[C]// Proceedings of the 20th Analysis and Computation Specialty Conference. 2012: 1-113.
[8] 刘海卿, 王锦力, 徐忠华. 基于SMA三维隔震支座的网壳结构地震响应分析[C]// 第二届结构工程新进展国际论坛论文集, 大连, 中国建筑工业出版社，2008: 1129-1137.
LIU Haiqing, WANG Jinli, XU Zhonghua. The shell structure earthquake analysis based on the SMA 3d base isolator[C]// Proceedings of the Second International Forum on Advances in Structural Engineering, Dalian, China Architecture & Building Press, 2008: 1129-1137.
[9] 赵亚敏, 苏经宇, 周锡元等. 碟形弹簧竖向隔震结构振动台试验及数值模拟研究[J]. 建筑结构学报, 2008, 29(6): 99-106.
ZHAO Yamin, SU Jingyu, ZHOU Xiyuan, et al. Shaking table test and numerical analysis of vertical isolated building model with combined disk spring bearing[J]. Journal of Building Structures, 2008, 29(6): 99-106.
[10] 何文福, 刘文光，杨彦飞等. 厚层橡胶隔震支座基本力学性能试验[A]. 解放军理工大学学报（自然科学版）， 2011, 12(3): 258-263.
HE Wenfu, LIU Wenguang, YANG Yanfei, et al. Basic mechanical properties of thick rubber isolators[J]. Journal of PLA University of Science and Technology(Natural Science Edition), 2011, 12(3): 258-263.
[11] 刘文光, 余宏宝, IMAM MOUSTAFA I等. 倾斜旋转型三维隔震装置的力学模型和竖向性能试验研究[J]. 振动与冲击，2017,36(9): 68-73.
LIU Wenguang, YU Hongbao, IMAM MOUSTAFA I, et al. Tests for mechanical model of an inclined rotational three-dimensional seismic isolation device and its vertical performance[J]. Journal of Vibration and Shock, 2017, 36(9): 68-73.
[12] 许浩, 刘文光, 何文福等. 斜向滑动摩擦三维隔震装置的滞回模型及其减震效果[J]. 建筑结构学报，2017, 38(10): 123-130.
XU Hao, LIU Wenguang, HE Wenfu, et al. Research on hysteretic model and isolation effect of oblique sliding friction 3D seismic isolation device[J]. Journal of Building Structures, 2017, 38(10): 123-130.