偏心轮叠层摩擦阻尼器的滞回性能研究

摘要
图/表
参考文献(13)
相关文章 (15)

全文: PDF (1764 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

为解决常规摩擦阻尼器过大压力导致的一系列问题，设计一种新型偏心轮叠层摩擦阻尼器。该阻尼器以并联多层叠加的摩擦面的方法，实现在较小摩擦界面正压力条件下获得目标摩擦阻尼力的目的；设置偏心轮加压装置，使得阻尼器实现变摩擦功能，且阻尼器摩擦面在服役期间的待命阶段的预压力为0，以提高阻尼器的可靠性，进一步解决过大压力的问题。通过往复加载试验对该阻尼器的性能进行了研究，获得了偏心轮叠层摩擦阻尼器阻尼力与位移的关系，并对偏心轮叠层摩擦阻尼器力学性能进行了有限元分析。结果表明：阻尼器摩擦板的叠层设计能够有效放大了摩擦阻尼力；偏心轮叠层摩擦阻尼器可以提供变摩擦滞回曲线，理论公式、有限元模拟结果与试验结果吻合较好，可作为该阻尼器设计的参考依据。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	白国廷1
	彭凌云1
	康迎杰2

关键词 ：摩擦阻尼器, 变摩擦, 往复加载试验, 有限元模拟

Abstract：

A new type of eccentric wheel layered friction damper was proposed in order to solve a series of problems induced by the excessive pressure needed for the normal friction damper.To achieve the goal of obtaining proper damping force under a smaller pressure, parallel multilayer friction plates were adopted.What’s more, a pressure device with eccentric wheels was designed to get a variable friction function and to keep the pre-pressure on the friction surface of the damper at 0 during the standby stage of the service period so as to improve the reliability of the damper and solve the problem of excessive pressure.The performance of the damper was studied through reciprocating load tests.The relation between the damping force and the displacement of the eccentric wheel layered friction damper was obtained, and the mechanical properties of the eccentric wheel layered friction damper were analyzed with finite element method.The results show that the layered design of friction damper can effectively enlarge the friction damping force.The theoretical and finite element simulation results are in good agreement with the experimental results, which shows the results can be used as references for the design of dampers.

Key words： friction damper variable friction reciprocating load test finite element simulation

收稿日期: 2019-12-09 出版日期: 2021-03-28

引用本文:

白国廷1，彭凌云1，康迎杰2. 偏心轮叠层摩擦阻尼器的滞回性能研究[J]. 振动与冲击, 2021, 40(6): 64-70.
BAI Guoting1，PENG Lingyun1，KANG Yingjie2. Hysteretic performance of an eccentric wheel layered friction damper. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(6): 64-70.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2021/V40/I6/64

［1］PALL A S, MARCH C.Seismic response of friction damped braced frames［J］.Journal of Structural Division,1982,108(6): 1313-1323.

［2］YOKOUCHI H, KITAJIMA K, AGETA H, et al.Application to response control retrofit method by means of external damping braces using frition dampers［C］//13th World Conference on Earthquake Engineering.［S.l.］: WCEE, 2004.

［3］MUALLA I H.Experimental evaluation of new friction damper device［C］//12th World Conference on Earthquake Engineering.Auckland: WCEE, 2000.

［4］彭凌云,周锡元.拟线性摩擦阻尼器性能试验与有限元分析［J］.建筑结构学报, 2010(6): 188-194.
PENG Lingyun, ZHOU Xiyuan.Experiment and FEA on performance of pseudo-linear friction damper［J］.Journal of Building Structures, 2010(6): 188-194.

［5］温涛铸.摩擦学原理［M］.北京：清华大学出版社，2002.

［6］吴斌,欧进萍.拟粘滞摩擦耗能器的性能试验与分析［J］.世界地震工程, 1999,15(1): 1-11.
WU Bin, OU Jinping.Performance test and analysis of pseudo viscous frictional damper［J］.World Earthquake Engineering, 1999,15(1): 1-11.

［7］吴斌,张纪刚,欧进萍.一种改进的拟粘滞摩擦阻尼器的试验研究与数值分析［J］.土木工程学报, 2004,37(1): 24-30.
WU Bin, ZHANG Jigang, OU Jinping.Testing and numerical analysis of an improved pseudo-viscous frictional damper［J］.China Civil Engineering Journal, 2004,37(1): 24-30.

［8］吴斌,欧进萍.高层拟粘滞摩擦耗能结构的试验与参数研究［J］.世界地震工程, 1999,15(2): 17-27.
WU Bin, OU Jinping.Experimental and parametric study on high viscous pseudo friction energy dissipation structures［J］.World Earthquake Engineering, 1999,15(2): 17-27.

［9］NIMSDK, RICHTER P J, BACHMAN R E.The use of the energy dissipating restraint for seismic hazard mitigation［J］.Earthquake Spectra, 1993,9(3): 467-489.

［10］周云.摩擦耗能减震结构设计［M］.武汉:武汉理工大学出版社,2006.

［11］彭凌云,常健,苏经宇,等.具有复阻尼特征板式变摩擦阻尼器滞回性能研究［J］.振动与冲击，2017,36(18): 189-195.
PENG Lingyun, CHANG Jian, SU Jingyu, et al.Hysteretic behavior of variable friction damper with complex damping characteristics［J］.Journal of Vibration and Shock, 2017,36(18): 189-195.

［12］吴拓.机床夹具设计实用手册［M］.北京: 化学工业出版社,2014.

［13］KANG Y J, PENG L Y.Development and analysis of the control effect of a reid damper with self-centering characteristics［J］.Shock and Vibration, 2018,2018: 1-18.