电机定子铁芯振动特性分析的一种解析方法

摘要
图/表
参考文献(15)
相关文章 (15)

全文: PDF (1297 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要随着新能源汽车的发展，用户对电机噪声的要求日趋严格，噪声振动分析已经成为电机开发中的重要内容。定子的电磁振动是电机的主要噪声源，由于电机定子的复杂结构，目前常用有限元方法建模分析定子铁芯的振动特性，耗时太长，不能满足定子优化设计的振动噪声特性快速计算要求。本文提出了一种解析方法用于计算定子铁芯的振动特性。采用厚壳-梁耦合结构对定子铁芯进行简化，计入了定子齿对振动特性的影响；推导了耦合结构的解析能量泛函，并使用Rayleigh-Ritz法计算出定子铁芯的固有频率和模态振型。应用该解析方法计算了电机定子振动特性，分析了定子齿枢的影响，并与商用软件的有限元建模分析结果进行比较，两者误差小于5%，验证了本文提出解析方法的准确性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	屈仁浩
	蒋伟康

关键词 ：解析法, 厚壳-梁耦合, 振动特性, 固有频率, 定子铁芯

Abstract：With development of new energy source vehicles, motor noise requirements of users are increasingly strict, noise and vibration analyses become an important part of motor development. Electromagnetic vibration of stator is the main noise source of a motor. Due to the complex structure of stator, the finite element (FE) method is usually used to model and analyze vibration characteristics of stator core, and it takes too long time to meet rapid calculation requirements of vibration and noise characteristics of stator optimization design. Here, an analytical method was proposed to calculate vibration characteristics of stator core. A thick shell-beam coupled structure was adopted to simplify stator core, and effects of stator teeth on vibration characteristics were considered. The coupled structure’s energy functional was derived using interface continuity conditions. Rayleigh-Ritz method was used to calculate a stator core’s natural frequencies and modal shapes. Finally, the proposed method was applied to calculate vibration characteristics of a certain stator core, and effects of stator teeth were analyzed. The results obtained with the proposed analytical method were compared with those obtained with the famous FE software. It was shown that the error between them is less than 5% to verify the correctness of the proposed analytical method.

Key words： analytical method thick shell-beam coupled vibration characteristics natural frequency stator core

收稿日期: 2019-09-24 出版日期: 2021-02-15

引用本文:

屈仁浩，蒋伟康. 电机定子铁芯振动特性分析的一种解析方法[J]. 振动与冲击, 2021, 40(3): 81-86.
QU Renhao, JIANG Weikang. An analytical method for vibration characteristics analysis of motor stator core. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(3): 81-86.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2021/V40/I3/81

[1] 陈永校，诸自强，应善成.电机噪声的分析和控制 [M]. 杭州：浙江大学出版社，1987.
[2] 时方敏,朱利伟.永磁同步电机定子系统模态振型研究[J].电机与控制应用，2018,45(10):77-81.
SHI Fangmin, ZHU Liwei. Research on Modal Vibration Mode of Permanent Magnet Synchronous Motor Stator System [J]. Electric Machines & Control Application, 2018, 45 (10): 77-81.
[3] Boesing M, Schoenen T, Kasper A K, et al. Vibration Synthesis for Electrical Machines Based on Force Response Superposition [J]. IEEE Transactions on Magnetics, 2010， 46(8): 2986-2989.
[4] 邓文哲,左曙光,孙罕,等.考虑定子铁芯和绕组各向异性的爪极发电机模态分析[J]. 振动与冲击，2017, 36(12): 43-49.
DENG WenZhe, ZUO Shuguang, SUN Han, et al. Modal analysis of a claw-pole alternator considering orthotropy of the stator core and windings [J]. Journal of Vibration and Shock, 2017,36(12):43-49.
[5] 韩伟,贾启芬,邱家俊. 异步电机定子的振动与模态分析[J]. 振动与冲击，2012, 31(17): 91-94+115.
HAN Wei, JIA Qifen, Qiu Jiajun, Vibration and modal analysis for stator of an induction motor [J]. Journal of Vibration and Shock, 2012, 31 (17): 91-94+115.
[6] 谢颖,李飞,黎志伟,等. 内置永磁同步电机减振设计与研究[J]. 中国电机工程学报, 2017,37(18):5437-5445+5543.
XIE Ying, LI Fei, LI Zhiwei, et al. Optimized design and research of vibration reduction with an interior permanent magnet synchronous motor [J]. Proceedings of the CSEE, 2017,37(18): 5437-5445+5543.
[7] 李琛,章跃进,周晓燕,等.定子开槽表贴式永磁电机转子偏心空载气隙磁场全局解析法[J].电机与控制学报,2014,18(10):27-35.
LI Chen, ZHANG Yuejin, ZHOU Xiaoyan, et al. Exact analytical solution of open-circuit air-gap magnetic field forslotted surface-mounted permanent-magnet motors with rotor eccentricity [J]. Electric Machines and Control, 2014,18(10):27-35.
[8] Islam R, Husain I. Analytical model for predicting noise and vibration in permanent-magnet synchronous motors [J]. Transactions on industry applications, 2010, 46(6): 2346-2354.
[9] Shen L, Wu J, Yang S. Analytical modeling of stator vibration for surface mount permanent magnet brushless motors [A], in 2011 International Conference on Electrical Machines and Systems [C], Piscataway, IEEE, 2011: 1-5.
[10] 邱家俊,李文兰.边界约束对水轮发电机定子系统固有频率的影响[J]. 大电机技术，1998(02): 1-5.
QIU Jiajun, LI Wenlan, The influence of various boundary constraints on the natural frequencies of hyfrogenerator stator system [J]. Large Electric Machine and Hydraulic Turbine, 1998(02): 1-5.
[11] R.K. Singal, S.P. Verma, K. Williams, Vibrations of long and short laminated stators of electrical machines Part III: Results for short stators and validity of simplified frequency equation [J]. Journal of Sound and Vibration, 1989, 129(1): 31-44.
[12] B.A.J. Mustafa, R. Ali. An energy method for free vibration analysis of stiffened circular cylindrical shells [J], Computers & Structures, 1989, 32(2): 355-363.
[13] Rao S S. Vibration of continuous systems [M]. New York: Wiley, 2007.
[14] R. Islam, I. Husain. Analytical Model for Predicting Noise and Vibration in Permanent-Magnet Synchronous Motors [J], IEEE Transactions on Industry Applications, 2010, 46(6): 2346-2354.
[15] Jin Guoyong, Ye Tiangui, Ma Xianglong, et al. A unified approach for the vibration analysis of moderately thick composite laminated cylindrical shells with arbitrary boundary conditions [J]. International Journal of Mechanical Sciences, 2013, 75: 357-376.