Abstract:Based on the plugging failure mechanism, considering the energy conservation law and the shear plugging model, a plug velocity model for rigid blunt projectiles (flat, hemispherical and spherical) penetrating intermediate thick metal plates was presented.A perforation test with 3 mm thick GH4169 plates penetrated by 8 mm diameter tungsten balls was conducted and the initial and residual velocities of projectiles as well as the plug velocities were obtained by high-speed photography.The plug velocity model was verified by the above experimental data and the experimental data of projectiles with flat and hemispherical noses in the literature.The results show good agreement between the experimental data and the calculation results by the plug velocity model.The plug velocity model presented can be used to calculate the damage capability of the plug to the target behind plates.
孙永壮,吕中杰,刘彦,黄风雷. 刚性钝头弹体正贯穿中厚金属靶的挤凿块速度模型[J]. 振动与冲击, 2021, 40(6): 177-183.
SUN Yongzhuang,L Zhongjie,LIU Yan,HUANG Fenglei. Plug velocity model of intermediate thick metal plates positive penetrated by blunt rigid projectiles. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(6): 177-183.
[1]ANDERSON C E.Analytical models for penetration mechanics: a review[J].International Journal of Impact Engineering, 2017,108: 3-26.
[2]RECHT R F, IPSON T W.Ballistic perforation dynamics[J].Journal of Applied Mechanics, 1963,30(3): 384-390.
[3]PRADHAN P K, GUPTAB N K, AHMADB S, et al.Numerical investigations of spherical projectile impact on 4 mm[J].Procedia Engineering, 2017,173: 109-115.
[5]司马玉洲,肖新科,王要沛,等.7A04-T6 高强铝合金板对平头杆弹抗侵彻行为的试验与数值模拟研究[J].振动与冲击,2017,36(11):1-7.
SIMA Yuzhou, XIAO Xinke, WANG Yaopei, et al.Experimental and numerical study on the ballistic performance of high strength 7A04-T6 aluminium alloy plate against blunt projectile impact[J].Journal of Vibration and Shock, 2017,36(11): 1-7.
[6]B RVIK T, LANGSETH M, HOPPERSTAD O S, et al.Ballistic penetration of steel plates[J].International Journal of Impact Engineering, 1999,22(9): 855-886.
[7]B RVIK T, HOPPERSTADA O S, LANGSETHA M, et al.Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates[J].International Journal of Impact Engineering, 2003,28(4): 413-464.[8]BRVIK T, LANGSETH M, HOPPERSTAD O S,et al.Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses.Part I: experimental study[J].International Journal of Impact Engineering, 2002,27(1): 19-35.
[9]钱伟长. 穿甲力学[M].北京:国防工业出版社,1984.
[10]CZARNECKI G J.Estimation of the V50 using semi-empirical (1-point) procedures[J].Composites Part B: Engineering, 1998,29(3): 321-329.
[11]陈小伟.穿甲侵彻问题的若干工程进展[J].力学进展,2009,39(3):316-351.
CHEN Xiaowei.Advances in the penetration/perforation of rigid projectiles[J].Advances in Mechanics, 2009,39(3): 316-351.
[12]CHENX W, LI Q M.Shear plugging and perforation of ductile circular plates struck by a blunt projectile[J].International Journal of Impact Engineering, 2003,28(5): 513-536.
[13]陈小伟,杨云斌,路中华.带前舱物的钝头弹对金属靶的正穿甲分析[J].爆炸与冲击,2006,26(4):294-302.
CHEN Xiaowei, YANG Yunbin, LU Zhonghua.Perforation of metallic plates struck by a blunt projectile with a nose-cabin-column[J].Explosion and Shock Waves, 2006, 26(4): 294-302.
[14]ZHAO Y P.Prediction of structural dynamic plastic shear failure by Johnson’s damage number[J].Forsch Ingenieurwes, 1998,63(11/12): 349-352.
[15]齐欢. INCONEL718(GH4169)高温合金的发展与工艺[J].材料工程,2012(8):92-100.
QI Huan.Review of INCONEL 718 alloy:it’s history, properties, processing and developing substitutes[J].Journal of Materials Engineering, 2012 (8): 92-100.
[16]徐豫新,王树山,伯雪飞,等.钨合金球形破片对低碳钢的穿甲极限[J].振动与冲击,2011,30(5):192-195.
XU Yuxin, WANG Shushan, BO Xuefei, et al.Armor-piercing ultimate of tungsten alloy spherical fragment against low-carbon steel[J].Journal of Vibration and Shock, 2011,30(5): 192-195.
[18]高润芳,韩峰,马晓青,等.几种钨合金破片垂直侵彻装甲钢板极限穿透速度研究[J].弹箭与制导,2005,25(4): 57-62.
GAO Runfang, HAN Feng, MA Xiaoqing, et al.Investigation of tungsten fragments of different shape penetrating armour plate[J].Journal of Projectiles, Rockets, Missiles and Guidance, 2005,25(4): 57-62.
[19]PEREIRA J M, LERCH B A.Effect of heat treatment on the ballistic impact properties of Inconel 718 for jet engine fan containment applications[J].International Journal of Impact Engineering, 2001,25(8): 715-733.
[20]王海福,刘志雄,冯顺山.钢球侵彻钛合金靶板弹道极限速度[J].北京理工大学学报,2003,23(2):162-164.
WANG Haifu, LIU Zhixiong, FENG Shunshan.Ballistics limit velocity for spherical steel fragments penetrating titanium-alloy target plates[J].Transactions of Beijing Institute of Technology, 2003,23(2): 162-164.