Seismic response analysis of frame-shear wall structure with dual-energy dissipation mechanism
LUO Weigang1,2, LIU Jibin3, SONG Jiangpeng1, QI Pan1
1.School of Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
2.MOE Westward Engineering Research Center of Disaster Mitigation in Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
3.Shenzhen General Institute of Architectural Design and Research Co., Ltd., Shenzhen 518031, China
Abstract：Rocking wall system has been widely studied, but due to the relaxation of the wall bottom constraint, the anti-side stiffness decreases, resulting in the overall deformation of the structure too large, not meeting the security requirements. In order to solve this problem, the buckling restrained brace（BRB）can yield without buckling under the action of tension and pressure, then the BRB is used as the connecting member of the frame and the wall, and metallic damper (MD) is set at the bottom of the wall to double control the structural deformation of the lower limit value, enhance the energy dissipation of the structure and reduce the seismic response of the structure. In this paper, a six-story concrete frame-shear wall, for example, using the finite element software ABAQUS and combined with UMAT secondary development interface of PQ-Fiber user subroutine, established the frame-shear wall structure model, the framework of different yield strength BRB rocking wall to wall with different stiffness of metallic damper model, through dynamic elastic-plastic time history analysis, to study the seismic performance of the structure. The results show that the seismic response of the frame rocking wall structure is greatly improved under the control of the double energy dissipation element of BRB between the frame and the shear wall and MD at the shear wall base, and which are in a proper range of properties.
罗维刚1,2，刘纪斌3，宋江朋1，祁盼1. 双重耗能机制框架剪力墙结构地震响应分析[J]. 振动与冲击, 2022, 41(5): 151-157.
LUO Weigang1,2, LIU Jibin3, SONG Jiangpeng1, QI Pan1. Seismic response analysis of frame-shear wall structure with dual-energy dissipation mechanism. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(5): 151-157.
［1］ 周颖，吕西林.摇摆结构及自复位结构研究综述[J].建筑结构学报, 2011, 32(9): 1-10.
Zhou Ying, Lü Xilin. State-of-the-art on rocking and self-centering structures [J].Journal of Building Structures, 2011, 32(9): 1-10. (in Chinese)
［2］ Housner G.W. The behavior of inverted pendulum structures during earthquakes [J]. Bulletin of the Seismological Society of America, 1963, 53(2): 403-417.
［3］ Priestley M.J.N., Evison R.J., Carr A. J. Seismic response of structures free to rock on their foundations[J]. Bulletin of the New Zealand National Society for Earthquake Engineering, 1978, 11(3): 141-150.
［4］ Wada A., Qu Z., Ito H., etal. Seismic retrofit using rocking walls and steel dampers[C]. ATC /SEI Conference on improving the seismic performance of existing buildings and other structures. 2009: 1010-1021.
［5］ 曲哲, 和田章, 叶列平. 摇摆墙在框架结构抗震加固中的应用[J]. 建筑结构学报, 2011（9）, 32（9）: 11-20.
Qu Zhe, Wada Akira, Ye Lieping. Seismic retrofit of frame structures using rocking wall system[J]. Journal of Building Structures, 2011（9）, 32（9）: 11-20. (in Chinese)
［6］ Qu Z., Wada A., Motoyui S., Sakata H., Kishiki S. Pin-supported walls for enhancing the seismic performance of building structures [J]. Earthquake Engineering and Structural Dynamics, 2012; 41(14): 2075-2091.
［7］ 曹海韵, 潘鹏, 叶列平,等. 混凝土框架摇摆墙结构体系的抗震性能分析[J]. 建筑科学与工程学报, 2011, 28(1):64-69.
Cao Haiyun, Pan Peng, Ye Lieping, etal. Seismic performance analysis of RC frame rocking-wall structure system[J]. Journal of Architecture and Civil Engineering, 2011, 28(1):64-69. (in Chinese)
［8］ 吴守君，潘鹏，张鑫. 框架-摇摆墙结构受力特点分析及抗震加固中的应用[J]. 工程力学, 2016, 33(6):54-67.
WU Shou-jun, PAN Peng, ZHANG Xin. Characteristics of frame rocking wall structure and its application in a seismic retrofit[J]. Engineering Mechanics. 2016, 33(6):54-67.(in Chinese)
［9］ Midorikawa M., Tatsuya A., Tadashi T., etal. Earthquake response reduction of buildingsby rocking structural systems[C]. Smart Structures and Materials 2002: Smart Systems for Bridges, Structures，and Highways. San Diego, CA: SPIE, 2002: 265-272.
［10］ Ajrab J. J., Gokhan P., Mander J.B. Rocking wall-frame structures with supplemental tendon systems[J]. Journal of Structural Engineering, 2004, 130(6): 895-903.
［11］ Hitaka T., Sakino K.. Cyclic tests on a hybrid coupled wall utilizing a rocking mechanism[J]. Earthquake Engineering and Structural Dynamics, 2010, 37(14):1657-1676.
［12］ Gavridou S. Shake table testing and analytical modeling of a full-scale, four-story unbonded post-tensioned concrete wall building[D]. UCLA, 2015.
［13］ 冯玉龙，吴京，孟少平，等.底部带有屈曲约束支撑的摇摆墙框架结构抗震性能分析[J]. 振动与冲击, 2016, 35(23):35-40.
Feng Yulong, Wu Jing,Meng Shaoping, et al. Aseismic performance analysis of rocking wall frame structures with buckling-restrained braces in base[J]. Journal of Vibration and Shock, 2016, 35(23): 35-40. (in Chinese)
［14］ Deierlein G. G., Ma X., Eatherton M, et al. Collaborative research on development of innovative steel braced frame systems with controlled rocking and replaceable fuses[C]//Proceedings of 6th international conference on urban earthquake engineering, Tokyo. 2009: 413-416.
［15］ Barbagallo F. , Bosco M., Ghersi A , et al. Seismic Retrofitting of Eccentrically Braced Frames by Rocking Walls and Viscous Dampers[J]. Key Engineering Materials, 2018, 763:1105-1112.
［16］ M. Kasagi, K. Fujita, M. Tsuji, I. Takewaki. Automatic generation of smart earthquake-resistant building system: Hybrid system of base-isolation and building-connection[J].Heliyon, 2016, 2(2):1-21
［17］ M. Murase, M. Tsuji, I. Takewaki. Smart passive control of buildings with higher redundancy and robustness using base-isolation and inter-connection[J] Earthquakes and Structures, 2013, 4(6):649-670.
［18］ 吕西林, 全柳萌, 蒋欢军. 从16届世界地震工程大会看可恢复功能抗震结构研究趋势[J]. 地震工程与工程振动, 2017(03):5-13.
Lu Xilin, Quan Liumeng, Jiang Huanjun. Research trend of earthquake resilient structures seen from 16WCEE[J]. Earthquake Engineering and Engineering Vibration, 2017(03):5-13.
［19］ 孔祥雄. 新型屈曲约束支撑抗震性能研究[D]. 中国建筑科学研究院, 2009.
Kong Xiangxiong. Study on seismic behavior of a new type of buckling-restrained braces[D]. China Academy of Building Reserch, 2009. (in Chinese)
［20］ 吕文, 钱稼茹, 方鄂华. 钢筋混凝土剪力墙延性的试验和计算[J]. 清华大学学报(自然科学版), 1999, 39(4):88-91.
Lu Wen, Qian Jiaru, Fang Ehua. Experimental and computational studies on ductility of reinforced concrete shear walls[J]. Journal of Tsinghua University (Science and Technology), 1999, 39(4):88-91. (in Chinese)
［21］ 文保军. 钢筋混凝土剪力墙塑性铰区受剪承载力分析[D]. 西安建筑科技大学, 2008.
Wen Baojun. Shear capacity of plastic hinge region of RC shear wall[D]. Xi`an University of Architecture and Technology, 2008. (in Chinese)
［22］ FEMA356. Prestandard and commentary for the seismic rehabilitation of buildings. Washington(DC) [S]: Federal Emergency Management Agency, 2000.
