Abstract：In order to analyze the bending vibration frequency and dynamic response characteristics of composite I-beam with corrugated steel webs, considering the influence of multi-factors such as shear deformation, moment of inertia, self balance of shear lag warping stress and accordion effect, two different longitudinal warping dynamic displacement difference functions were set up for the upper and lower flange plates of composite I-beam. The natural frequencies of composite I-beam under different boundary conditions were calculated by numerical examples. The effects of shear lag effect and warping stress self balance on the vibration characteristics of composite I-beam were analyzed in detail. It shows that the calculated results of the calculated results of the proposed closed-form solutions agree well with the ANSYS finite element values, and the calculation accuracy is significantly improved; the shear lag effect reduces the vertical stiffness of the composite I-beam, and its influence increases with the increase of frequency order, and decreases with the increase of span width ratio; Compared with the simply supported composite girder, the frequency value of the composite girderone with fixed ends is more affected by the shear lag effect; The results show that the contribution of stress self balance to the natural frequency of composite I-beam is less than 5%, and the influence on the dynamic stress amplitude of wing plate is more than 10%. The plane section assumption is no longer applicable in the dynamic analysis of this kind of structure.
张紫辰1，王根会1，樊江2. 波形钢腹板组合工字梁的振动特性[J]. 振动与冲击, 2022, 41(8): 297-303.
ZHANG Zichen1, WANG Genhui1, FAN Jiang2. Vibration characteristics of composite I-beam with corrugated steel webs. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(8): 297-303.
[ 1 ] JIHO MOON, JONG-WON YI, BYUNG H, et al. Lateral torsional buckling of I-girder with corrugated webs under uniform bending [J]. Thin-Walled Structures, 2009, (47): 21-30.
[ 2 ] HASSANEIN M. F., KHAROOB O.F. Shear buckling behavior of tapered bridge girders with steel corrugated webs [J]. Engineering Structures, 2014, (74): 157-169.
[ 3 ] 张哲，叶梓，王燕，等．工字型装配式波形钢腹板组合梁张拉试验研究[J]．世界桥梁，2020，48(6)：43-48．
ZHANG Zhe, YE Zi, WANG Yan, et al. Study of tensioning test for modular composite I beam with corrugated steel webs [J]. World Bridges, 2020, 48 (6): 43-48.
[ 4 ] ELDIB A H. Shear buckling strength and design of curved corrugated steel webs for bridges [J]. Journal of Constructional Steel Research, 2009, 65(12): 2129-2139.
[ 5 ] 李立峰，侯立超，孙君翠．波形钢腹板抗剪性能研究[J]．湖南大学学报(自然科学版)，2015，42(11)：56-63．
LI Lifeng, HOU Lichao, SUN Juncui. Research on shear mechanical property of corrugated steel webs[J]. Journal of Hunan University (Science and Technology), 2015, 42(11): 56-63.
[ 6 ] 聂建国，朱力，唐亮．波形钢腹板抗剪强度[J]．土木工程学报，2013，46(6)：97-109．
NIE Jianguo, ZHU Li, TANG Liang. Shear strength of trapezoidal corrugated steel webs [J]. China Civil Engineering Journal, 2013, 46 (6): 97-109.
[ 7 ] 甘亚南，周广春，王根会，等．宽翼薄壁工字梁剪滞效应分析的能量变分法[J]．工程力学，2009，(2)：42-47．
GAN Yanan, ZHOU Guangchun, WANG Genhui, et al. Energy -variational method for the analysis of shear lag effect of thin-walled I-beams with wide flange [J]. Engineering Mechanics, 2009, (2): 42-47.
[ 8 ] 陈卓异，黄侨，杨明．波形钢腹板预弯工形梁的试验研究[J]．东南大学学报(自然科学版)，2013，43(5)：973-978．
CHEN Zhuoyi, HUANG Qiao, YANG Ming. Experimental research on preflex I-beam with corrugated steel web [J]. Journal of Southeast University (Science and Technology), 2013, 43 (5): 973-978.
[ 9 ] 甘亚南，王根会，金学军，等．波形钢腹板组合工字梁静力学特性研究[J]．铁道工程学报，2020，(3)：27-33．
GAN Yanan, WANG Genhui, JIN Xuejun, et al. Research on the statics properties of composite I-beams with corrugated steel webs [J]. Journal of Railway Engineering Society, 2020, (3): 27-33.
[ 10 ] SAMANTA A, MUKHOPADHYAY M. Finite element static and dynamic analyses of folded plates.[J]. Engineering Structures, 1999, 21: 277-287.
[ 11 ] 童精中，郭彦林．波浪腹板工形梁支承加劲肋设计方法研究[J]．建筑科学与工程学报，2013，30(3)：112-119．
TONG Jingzhong, GUO Yanlin. Study of design method of bearing stiffener of I-shaped girders with sinusoidal corrugated webs[J]. Journal of Architecture and Civil Engineering, 2013, 30 (3): 112-119.
[ 12 ] 林梦凯，冀伟，李海莲，等．波形钢腹板工字型钢梁的手风琴效应研究[J]．铁道科学与工程学报，2016，13(2)：283-288．
LIN Mengkai, JI Wei, LI Hailian, et al. Study on accordion effect of corrugated steel webs I-shaped steel girder [J]. Journal of Railway Science and Engineering, 2016, 13 (2): 283-288.
[ 13 ] 冀伟，邓露，刘世忠，等．多跨等截面波形钢腹板PC连续箱梁桥竖向弯曲振动频率的计算[J]．振动与冲击，2016，35(18)：140-146．
JI Wei, DENG Lu, LIU Shizhong, et al. Calculation of the vertical bending vibration frequencies of the PC continuous box girder with corrugated steel webs with uniform cross-section [J]. Journal of Vibration and Shock, 2016, 35(18): 140-146.
[ 14 ] 吴亚平，赖远明，朱元林，等．考虑剪力滞效应的薄壁曲梁有限单元[J]．工程力学，2002，19(4)：85-89．
WU Yaoing, LAI Yuanming,ZHU Yuanlin, et al. Finite element method considering shear lag effect for curved box beams [J]. Engineering Mechanics, 2002, 19(4): 85-89.
[ 15 ] 郑尚敏，万水，程海根．单箱多室波形钢腹板组合箱梁动力特性研究[J]．铁道工程学报，2017，(9)：41-46．
ZHENG Shangmin, WAN Shui, CHENG Haigen. Research on the dynamic characteristics of multi-room single box composite girder with corrugated steel webs [J]. Journal of Railway Engineering Society, 2017, (9): 41-46.
[ 16 ] 克拉夫 R.结构动力学[M]．王光远，译．北京：高等教育出版社，2006．
CLOUGH RAY. Dynamics of structures [M]. Translated by Wang Guangyuan. Beijing: Higher Education Press, 2006.
[ 17 ] 张紫辰，金学军，甘亚南．波形腹板钢箱组合梁竖向弯曲力学性能[J]．中国铁道科学，2019，40 (6)：52-59．
ZHANG Zichen, JIN Xuejun, GAN Yanan. Vertical Bending Mechanical Properties of Box Composite Girder with Corrugated Steel Webs [J]. China Railway Science, 2019, 40 (6): 52-59.
