浮冰碰撞下蜂窝金属夹芯板动态响应研究

摘要
图/表
参考文献(15)
相关文章 (15)

全文: PDF (3289 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要本文采用非线性有限元软件ANSYS/LS-DYNA，结合混凝土冰材料数值模型，建立了楔形冰碰撞下蜂窝金属夹芯板动态响应数值仿真模型，得到了碰撞过程的冲击力时间曲线和冲击力位移曲线、蜂窝金属夹芯板的变形以及冲击能量分配情况，并开展了楔形冰-蜂窝金属夹芯板碰撞冲击实验验证。研究结果表明，楔形冰碰撞下蜂窝金属夹芯板上面板表现为局部凹陷与整体弯曲的耦合变形模式，下面板表现为整体弯曲变形模式，冲击能量转化为蜂窝金属夹芯板的变形能和楔形冰的回弹动能以及冰体破碎耗散能量，数值仿真与实验结果吻合较好，验证了数值计算模型的准确性。在此基础上，研究了浮冰碰撞冲击位置以及蜂窝芯层厚度对其动态响应及能量分配的影响规律。
关键词：蜂窝金属夹芯板；浮冰碰撞；动态响应；能量吸收；实验验证

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	吴雄1
	2
	李应刚1
	2
	3
	肖雯1
	2
	蔡伟1
	2
	朱凌1
	2

关键词 ：蜂窝金属夹芯板, 浮冰碰撞, 动态响应, 能量吸收, 实验验证

Abstract：In this paper, numerical simulation model of honeycomb sandwich plate under ice floe impact is established by using finite element package ANSYS/LS-DYNA based on a concrete constitutive ice model. The impact force-displacement curves and the structural deformation as well as the energy absorption properties are numerically achieved. In addition, the ice wedge impact test of honeycomb sandwich plate was conducted. Result show that the top face sheet deformation mode intuitively embodies as the coupling mode of local structural indentation and global bending deformation, whereas the bottom face sheet deformation mode mainly manifests as the global bending deformation. The ice impact energy is mainly converted into the plastic deformation energy absorption of honeycomb sandwich plate and rebound kinetic energy of ice wedge as well as the energy dissipation of ice fracture failure. Numerical results are consistent with experimental results, which show the accuracy and reliability of numerical model. Furthermore, the effects of ice floe impact position and honeycomb core thickness on the dynamic responses and energy absorption are performed.
Key words: Honeycomb sandwich plates; Ice floe impact; Dynamic responses; Energy absorption; Experimental validations

Key words： Honeycomb sandwich plates Ice floe impact Dynamic responses Energy absorption Experimental validations

收稿日期: 2021-05-12 出版日期: 2022-08-28

引用本文:

吴雄1,2，李应刚1,2,3，肖雯1,2，蔡伟1,2，朱凌1,2. 浮冰碰撞下蜂窝金属夹芯板动态响应研究[J]. 振动与冲击, 2022, 41(16): 204-209.
WU Xiong1,2,LI Yinggang1,2,3,XIAO Wen1,2,CAI Wei1,2,ZHU Ling1,2. Dynamic responses of a honeycomb sandwich plate under ice floe impact. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(16): 204-209.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2022/V41/I16/204

[1] 朱英富,刘祖源,解德,李万红.极地船舶核心关键基础技术现状及我国发展对策[J].中国科学基金,2015,29(03):178-186.
Zhu YF, Liu ZY, Xie D, et al. Advancements of the core fundamental technologies and strategies of China regarding the research and development on polar ships[J]. Bulletin of national natural science foundation of china, 2015,29(03):178-186.
[2] 薛彦卓,倪宝玉.极地船舶与浮体结构物力学问题研究综述[J].哈尔滨工程大学学报,2016,37(01):36-40.
Xue Y, Ni B Y. Review of mechanical issues for polar region ships and floating structures[J]. Journal of Harbin Engineering University, 2016,37(01):36-40.
[3] Liu Z, Amdahl J, Loset S. A new formulation of the impact mechanics of ship collisions and its application to a ship-iceberg collision. Marine Structures, 2010, 23(3): 360-384.
[4] Liu Z, Amdahl J, Loset S. Plasticity based material modelling of ice and its application to ship-iceberg impacts. Cold Regions Science and Technology,2011(a),65, 326-334.
[5] Liu Z, Amdahl J, Loset S. Integrated numerical analysis of an iceberg collision with a foreship structure. Marine Structure, 2011(b), 22(2), 1-19.
[6] 张健, 万正权, 黄进浩, 尹群. 舷侧板架与冰体碰撞数值仿真及模型试验研究[J]. 船舶力学, 2014, 18(04): 424-433.
Zhang J, Wan Z, Huang J, et al. Research on numerical simulation and model test of collision between side grillage and icebergs[J]. Journal of Ship Mechanics, 2014, 18(04): 424-433.
[7] Ritch R, Frederking R, Johnston M, et al. Local ice pressures measured on a strain gauge panel during the CCGS Terry Fox bergy bit impact study[J]. Cold Regions Science and Technology, 2008, 52(1): 29-49.
[8] 王林, 沈炜炜. 破冰结构与冰载荷相互作用下的破坏模式和损伤机理研究[J]. 船舶工程, 2016, 38(11): 11-15.
Wang L, Shen W. Research of Structure Failure Mode and Damage Mechanism Under Interaction of Ice-breaking Structure and Ice Load[J]. Ship Engineering, 2016, 38(11): 11-15.
[9] 刘俊杰, 夏劲松, 金言, 董海波. 冰-水耦合作用下船舶与浮冰碰撞动响应数值仿真研究[J]. 船舶力学, 2020, 24(05): 651-661.
Liu J, Xia J, Jin Y, et al. Numerical simulation of dynamic response of collision between ship and floating ice under ice-water coupling effect[J]. Journal of Ship Mechanics, 2020, 24(05): 651-661.
[10] Gao Y, Hu Z, Ringsberg J W, Wang J. An elastic-plastic ice material model for ship-iceberg collision simulations[J]. Ocean Engineering, 2015, 102: 27-39.
[11] 王健伟, 邹早建. 基于非线性有限元法的船舶-冰层碰撞结构响应研究[J]. 振动与冲击, 2015, 34(23): 125-130.
Wang J, Zou Z. Ship's structural response during its collision with level ice based on nonlinear finite element method[J]. Journal of Vibration and Shock, 2015, 34(23): 125-130.
[12] Cai W, Zhu L, Yu T X, et al. Numerical simulations for plates under ice impact based on a concrete constitutive ice model[J]. International Journal of Impact Engineering, 2020, 143: 103594.
[13] Zhu L, Cai W, Chen M, et al. Experimental and numerical analyses of elastic-plastic responses of ship plates under ice floe impacts[J]. Ocean Engineering, 2020, 218: 108174.
[14] 敬霖, 王志华, 赵隆茂. 多孔金属及其夹芯结构力学性能的研究进展[J]. 力学与实践, 2015, 37(1): 1-24.
Jing L, Wang Z, Zhao L. Advances in studies of the mechanical performance of cellular matals and related sandwich structures[J]. Mechanics in Engineering, 2015, 37(1): 1-24.
[15] Zhang Y, Li Y, Guo K, Zhu L. Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads[J]. Ocean Engineering, 2021, 219: 108344.