Dynamic compression characteristics of aluminium powder
DENG Yongxing1, LU Xiaoxia1, LI Lei1, XU Songlin2, MIAO Chunhe2
1. State Key Lab of Civilians Protection against Nuclear, Biological and Chemical Disasters, Beijing 102205, China;
2. CAS Key Lab for Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, China
In order to obtain the mechanical behavior of ductile powder under dynamic compression, dynamic compression experiments of micron aluminum powder under different loading conditions were carried out by using split Hopkinson pressure bar (SHPB). A high-speed camera and an infrared temperature measurement system (ITMS) were used to record the development of the speckle field and the surface temperature of the aluminum powder samples, respectively. In the strain rate range from 10-4 s-1 to 3600 s-1, aluminum powder has obvious strain rate effect. The results of digital image correlation (DIC) show that the deformation of the specimen is not uniform, and the compaction of the specimen is dominated by particle translational motion in the early stage of compression, but by particle rotation and sliding in the later stage. ITMS results show that the radiation temperature of aluminum powder samples still rises after loading, which is different from that of solid materials. In the aluminum powder sample, due to a large number of pores, the particles accelerate under the drive of stress wave, and the impact energy is transformed into kinetic energy of particles. After further compression of the sample, the pores reduce and the particle movement is restricted, and the kinetic energy is transformed into internal energy of particles, and the temperature of the sample increases.
Key words: aluminium powder; Split Hopkinson pressure bar; Digital image correlation method; Infrared temperature measurement
邓永兴1，陆晓霞1，李磊1，徐松林2，苗春贺2. 铝粉动态压缩动力学特性研究[J]. 振动与冲击, 2022, 41(19): 231-236.
DENG Yongxing1, LU Xiaoxia1, LI Lei1, XU Songlin2, MIAO Chunhe2. Dynamic compression characteristics of aluminium powder. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(19): 231-236.
[1] 徐爽，汪越，武卓，等. 铝粉含量对 GAP 钝感推进剂性能的影响[J]. 含能材料,2021,29(10):928-936.
XU Shuang, WANG Yue, WU Zhuo,et al. Influence of Aluminum Powder Contents on Insensitive GAP Propellants [J]. Chinese Journal of Energetic Materials, 2021, 29(10): 928-936.
[2] DUNNETT K S, MUELLER R M, BISHOP D P. Development of Al–Ni–Mg–(Cu) aluminum P/M alloys [J]. Journal of materials processing technology, 2008, 198(1-3): 31-40.
[3] 万晓智, 马宏昊, 沈兆武, 等. RDX 基铝纤维炸药与铝粉炸药水下爆炸性能比较[J]. 振动与冲击，2014, 33(24): 129-132.
WAN Xiaozhi, MA Honghao, SHEN Zhaowu, et al. Comparison of underwater denotation performance of RDX-based aluminum fiber explosive and that of aluminum particle explosive [J]. Journal of Vibration and Shock, 2014, 33(24): 129-132.
[4] LI J, LI W, WANG X, et al. Mechanical properties and constitutive model of aluminum powder/rubber matrix composites compressed at various strain rates [J]. International Journal of Impact Engineering, 2018, 121: 55-62.
[5] JUSTICE A W, BEASON M T, GUNDUZ I E, et al. Dynamic stress-strain response of high-energy ball milled aluminium powder compacts [J]. Mechanics of Materials, 2020, 143: 103337.
[6] 罗晓龙, 刘军, 胡仙平. 冲击加载条件下金属粉末的动态力学性能分析[J]. 粉末冶金技术, 2018 (2): 111-117.
LUO Xiaolong, LIU Jun, HU Xianping. Analysis on dynamic mechanics performance of metal powders by impact loading [J]. Powder Metallurgy Technology, 2018 (2): 111-117.
[7] MAJMUDAR T S, BEHRINGER R P. Contact force measurements and stress-induced anisotropy in granular materials [J]. Nature, 2005, 435(7045): 1079-1082.
[8] HUANG J Y, XU S L, HU S S. The role of contact friction in the dynamic breakage behavior of granular materials [J]. Granular Matter, 2015, 17(1): 111-120.
[9] 陈鹏, 刘锦阳, 洪嘉振. 考虑摩擦的柔性多体系统斜碰撞理论与实验研究[J]. 振动与冲击, 2018, 37(1): 1-7.
CHEN Peng, LIU Jinyang, HONG Jiazhen. Simulation and experimental investigation on the eccentric collision in multi-body systems considering the friction effect [J]. Journal of Vibration and Shock, 2018, 37(1): 1-7.
[10] 庄琦, 王日龙, 史雪慧, 等. 基于 DIC 的受载砂土颗粒体系的细观参数及运动分析[J]. 实验力学, 2016, 31(3): 377-385.
ZHUANG Qi, WANG Rilong, SHI Xuehui, et al. On the meso parameters and movement analysis of a loaded sand particles system based on DIC [J]. Journal of Experimental Mechanics, 2016, 31(3): 377-385.
[11] HUANG J Y, LU L, FAN D, et al. Heterogeneity in deformation of granular ceramics under dynamic loading [J]. Scripta Materialia, 2016, 111: 114-118.
[12] KENDALL M J, FROUD R F, SIVIOUR C R. Novel temperature measurement method & thermodynamic investigations of amorphous polymers during high rate deformation [J]. Polymer, 2014, 55(10): 2514-2522.
[13] RITTEL D, BHATTACHARYYA A, POON B, et al. Thermomechanical characterization of pure polycrystalline tantalum [J]. Materials Science and Engineering: A, 2007, 447(1-2): 65-70.
[14] WEI Q, KECSKES L, JIAO T, et al. Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation [J]. Acta materialia, 2004, 52(7): 1859-1869.
[15] 刘永贵, 唐志平, 崔世堂. 冲击载荷下瞬态温度的实时测量方法[J]. 爆炸与冲击, 2014, 34(4): 471-475.
LIU Yonggui, TANG Zhiping, CUI Shitang. Real-time measuring methods for transient temperature under shock loading [J]. Explosion and Shock Waves, 2014, 34(4): 471-475.
[16] LIAO S C, DUFFY J. Adiabatic shear bands in a Ti-6Al-4V titanium alloy [J]. Journal of the Mechanics and Physics of Solids, 1998, 46(11): 2201-2231.
[17] BAI Y, LI L, FU L, et al. A review on high velocity compaction mechanism of powder metallurgy [J]. Science Progress, 2021, 104(2): 00368504211016945.
[18] CHEN W W, SONG B. Split Hopkinson (Kolsky) bar: design, testing and applications [M]. Springer Science & Business Media, 2010.
[19] MARKS B, SANDNES B, DUMAZER G, et al. Compaction of granular material inside confined geometries [J]. Frontiers in physics, 2015, 3: 41.
[20] OMIDVAR M, ISKANDER M, BLESS S. Stress-strain behavior of sand at high strain rates [J]. International journal of impact engineering, 2012, 49: 192-213.
[21] 周李姜. 动态加载下脆性材料非均匀变形演化研究[D]. 合肥：中国科学技术大学, 2018.
[22] 刘永贵. 考虑温度效应时相变波传播规律研究[D]. 合肥: 中国科学技术大学, 2013.
[23] JIANG H B, XU S L, SHAN J F, et al. Dynamic breakage of porous hexagonal boron nitride ceramics subjected to impact loading [J]. Powder Technology, 2019, 353: 359-371.
