新型矩形蜂窝夹芯夹层加筋圆柱壳抗水下爆炸冲击载荷分析
汪 浩;程远胜; 刘 均;李荣富
华中科技大学船舶与海洋工程学院,武汉 430074
The anti‐shock analysis of new type rectangular honeycomb sandwich stiffened Cylindrical shells subjected to underwater explosion shock load
Wang Hao;1Cheng Yuansheng1;Liu Jun;Li Rongfu
1. School of Naval Architecture and Ocean Engineering, Huazhong University of Science and TechnologyWuhan 430074, China
摘要 提出了一种新型矩形蜂窝夹芯夹层加筋圆柱壳结构形式。分析了其在水下爆炸冲击载荷下的动力响应特征及 冲击防护作用机理。采用LS‐DYNA 计算该结构在水下爆炸冲击载荷下的动力响应;并以耐压壳体的最大变形和塑性应 变为评价指标,计算讨论了典型设计参数变化对冲击防护效果的影响。最后针对一个典型方案,分析了其在不同冲击环境下的冲击防护效果。
关键词 :
矩形蜂窝夹芯夹层加筋圆柱壳 ,
塑性应变 ,
最大变形 ,
有限元 ,
冲击环境
Abstract : A new kind of rectangular honeycomb sandwich stiffened cylindrical shell is proposed. The responses and shock‐protection mechanism of this new structure are analyzed. In the study, the commercial code LS‐DYNA is employed to analyze the dynamic responses of this new sandwich structure subjected to underwater explosion shock load. The largest deformation and plastic strain of pressure hull are selected as the indicators to evaluate the effects of typical parameters on the anti‐shock performance of the structure. At last, the anti‐shock performance of a typical honeycomb sandwich stiffened cylindrical shell in different shock environment is also investigated.
Key words :
rectangular honeycomb sandwich stiffened cylindrical shell
plastic strain
largest deformation
finite element method
Shock environment
收稿日期: 2009-11-09
通讯作者:
程远胜
引用本文:
汪 浩;程远胜;刘 均;李荣富. 新型矩形蜂窝夹芯夹层加筋圆柱壳抗水下爆炸冲击载荷分析[J]. , 2011, 30(1): 162-166,.
Wang Hao;Cheng Yuansheng;Liu Jun;Li Rongfu. The anti‐shock analysis of new type rectangular honeycomb sandwich stiffened Cylindrical shells subjected to underwater explosion shock load. , 2011, 30(1): 162-166,.
链接本文:
http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2011/V30/I1/162
[1]
楼梦麟 邵新刚. 应用通用程序计算深覆盖土层地震反应的几个问题 [J]. , 2015, 34(4): 63-68.
[2]
张涛;吴勇军;吴静;王建军;. 制造误差影响齿轮副啮合的接触有限元分析方法 [J]. , 2015, 34(3): 43-50.
[3]
黄景琦;杜修力;赵密;金浏. 近场数值波动分析中地震波输入的一种简化方法 [J]. , 2015, 34(3): 77-82.
[4]
林永水;吴卫国;陈景昊;周雍;周超. 钢铝结构连接耦合损耗因子计算方法研究 [J]. , 2015, 34(3): 204-209.
[5]
姜 东;;吴邵庆;;费庆国;;韩晓林;. 蜂窝夹层复合材料不确定性参数识别方法 [J]. , 2015, 34(2): 14-19.
[6]
严鲁涛;杨志鹏;王有杰. 基于联合振动试验系统的正弦加随机振动研究 [J]. , 2015, 34(2): 91-95.
[7]
徐 超;林 松;王立峰;王建月. 基于Layerwise理论的共固化粘弹阻尼复合材料动特性分析 [J]. , 2015, 34(1): 6-12.
[8]
于蓬;陈霏霏;章桐;郭荣;. 集中驱动式电动车动力总成系统振动特性分析 [J]. , 2015, 34(1): 44-48.
[9]
潘 晋;张 敏;许明财. 桥梁防船撞钢套箱的碰撞力快速估算 [J]. , 2014, 33(8): 66-71.
[10]
武俊达;董大伟;闫兵;王媛文;孙玉华. 液压模块挂车刚柔耦合动态响应特性及摆臂疲劳分析 [J]. , 2014, 33(7): 37-44.
[11]
王军;姚熊亮;郭君. 中型浮动冲击平台结构设计研究 [J]. , 2014, 33(7): 86-91.
[12]
方智 季振林. 穿孔管阻性消声器横向模态和声学特性计算与分析 [J]. , 2014, 33(7): 138-146.
[13]
王鑫;胡卫兵;孟昭博. 基于小波包能量曲率差的古木结构损伤识别 [J]. , 2014, 33(7): 153-159.
[14]
王 蕊;张晓云;冯浩;陈建国. 大客车侧翻碰撞护栏事故仿真分析及改进 [J]. , 2014, 33(6): 40-43.
[15]
王 军;郭 君;姚熊亮;杨 棣. 浮动冲击平台对应实船冲击环境判别分析 [J]. , 2014, 33(6): 107-112.