Uniaxial mechanical characteristics of rocks cut and crushed by high-pressure abrasive water jet
HUANG Fei1,2,3, ZHAO Zhiqi2, LI Shuqing2, LIU Yong3, XU Zhiren2, LONG Gang2
1.Work Safety Key Lab on Prevention and Control of Gas and Roof Disaster for Southern Coal Mines, Hunan University of Science and Technology, Xiangtan 411201, China;
2.College of Resource & Environment and Safety Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
3.State Key Lab Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454003, China
Abstract：Changes of mechanical parameters of rocks cut by the abrasive water jet have important influence on the subsequent breakage of rocks. Three selected rock samples, i.e., sandstone, limestone and granite, were firstly cut by the high-pressure abrasive water jet (AWJ) on the water jet cutting platform. Three dimensional breakage forms of rock samples were gained with the help of CT scanning technics. Then, the mechanical response of rock samples cut by AWJ was analyzed according to uniaxial compression tests. It’s revealed that the majority of rock samples moving-cut by AWJ take on the regular slot shape while most of rock samples impacted by AWJ take on breaking holes. The damage degree of former breaking pattern inside rock is much larger than that of latter. The cutting action of AWJ causes the uniaxial compression crushing form shift to broken type, and this tendency get obvious with the increase of cutting length. However, the stress-strain trend of rock sample keeps unchanged before and after AWJ impacting/cutting. What’s more, the uniaxial compressive strength as well as the Poisson's ratio of rock sample approx. linearly decreases with the increasing of jet pressure and cutting length. The results of this paper could provide some basic theory for the applications of AWJ slotting coal seam.
黄飞1,2,3，赵志旗2，李树清2，刘勇3，徐志任2，龙港2. 高压磨料水射流切割破碎岩石的单轴力学特征研究[J]. 振动与冲击, 2023, 42(17): 128-134.
HUANG Fei1,2,3, ZHAO Zhiqi2, LI Shuqing2, LIU Yong3, XU Zhiren2, LONG Gang2. Uniaxial mechanical characteristics of rocks cut and crushed by high-pressure abrasive water jet. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(17): 128-134.
[1] 王恩元,汪皓,刘晓斐,沈荣喜,张超林.水力冲孔孔洞周围煤体地应力和瓦斯时空演化规律[J].煤炭科学技术,2020,48(01): 39-45.
WANG Enyuan,WANG Hao,LIU Xiaofei,et al. Spatio temporal evolution of geostress and gas field around hydraulic punching borehole in coal seam [J]. Coal Science and Technology,2020, 48(01):39-45.
[2] 葛兆龙,赵汉云,卢义玉,肖宋强,周哲,博涛.高压水射流冲击作用下煤-砂岩-页岩损伤破裂特征[J].振动与冲击,2021,40(13): 174-181+209.
Ge Zhaolong, Zhao Hanyun, Lu Yiyu, et al. Damage and fracture characteristics of coal-sandstone-shale under high pressure water jet impact [J]. Journal of Vibration and Shock, 2021,40(13): 174-181+209.
[3] 卢义玉,李瑞,鲜学福,葛兆龙,夏彬伟.地面定向井+水力割缝卸压方法高效开发深部煤层气探讨[J].煤炭学报,2021, 46(03):876-884.
LU Yiyu,LI Rui,XIAN Xuefu,GE Zhaolong,et al. Discussion on the efficient exploitation method of deep coalbed methane with pressure relief by ground directional well+hydraulic slotting [J]. Journal of China Coal Society,2021,46(03):876-884.
[4] Lu Yiyu, Huang Fei, Ao Xiang,et al. On the failure pattern of sandstone impacted by high-velocity water jet [J]. International Journal of Impact Engineering, 2015,76, 67-74.
[5] 刘勇,陈长江,魏建平,张娟.磨料水射流与磨料气体射流破岩压力对比分析[J].煤炭学报,2018,43(09):2510-2517.
LIU Yong,CHEN Changjiang,WEI Jianping,et al. Comparison analysis on the rock breakage pressure induced by abrasive water jets and abrasive gas jets [J]. Journal of China Coal Socie-ty,2018,43(09):2510-2517.
[6] 王凤超. 磨料浆体射流冲击岩石动静态应力应变分布研究[D].中国矿业大学,2018.
WANG Fengchao. Study on the distribution of dynamic and static stress strain in rock impacted by abrasive slurry jet [D].China University of Mining & Technology, 2018.
[7] 黄中伟,张世昆,李根生,杨睿月,武晓光,张宏源, Kamy Sepehr-noori.液氮磨料射流破碎高温花岗岩机理[J].石油学报,2020,41(05):604-614.
HUANG Zhong-Wei, ZHANG Shi-Kun, LI Gen-Sheng,et al. Breakage mechanism of high-temperature granite by abrasive liquid nitrogen jet [J]. Acta Petrolei Sinica,2020,41(05):604-614.
[8] 林柏泉,王瑞,乔时和.高压气液两相射流多级脉动破煤岩特性及致裂机理[J].煤炭学报,2018,43(01):124-130.
Lin Baiquan,Wang Rui,Qiao Shihe. Characteristics and mecha-nism of multistage fluctuation of coal-breaking caused by high-pressure gas-liquid two-phase jet [J]. Journal of China Coal Society,2018,43(01):124-130.
[9] 黄飞,卢义玉,李树清,赵伏军.高压水射流冲击速度对砂岩破坏模式的影响研究[J].岩石力学与工程学报,2016,35(11): 2259-2265.
HUANG Fei,LU Yiyu,LI Shuqing,et al. Influence of velocity of high-pressure water jet on failure patterns of sandstone [J]. Chinese Journal of Rock Mechanics and Engineering,2016, 35(11):2259-2265.
[10] 汤积仁,卢义玉,孙惠娟,葛兆龙,夏彬伟,李倩.基于CT方法的磨料射流冲蚀损伤岩石特性研究[J].岩石力学与工程学报,2016,35(02):297-302.
TANG Jiren,LU Yiyu,SUN Huijuan,et al. Study of erosion and damage characteristics of rock by abrasive water jet using CT [J]. Chinese Journal of Rock Mechanics and Engineer-ing,2016,35(02):297-302.
[11] 刘勇,魏建平,王登科,刘笑天.磨料气体射流冲蚀磨损岩石特征分析[J].煤炭学报,2018,43(11):3033-3041.
LIU Yong,WEI Jianping,WANG Dengke,et al. Erosive wear characteristic of rock impacted by abrasive gas jet [J]. Journal of China Coal Society, 2018,43(11):3033-3041.
[12] Cai Can, Wang Xiaochuan, Yuan Xiaohong,et al. Experimental investigation on perforation of shale with ultra-high pressure abrasive water jet: Shape, mechanism and sensitivity [J]. Journal of Natural Gas Science and Engineering, 2019, 67, 196-213.
[13] Huang Fei, Zhao Zhiqi, Li Dan, et al. Investigation of the breaking manifestations of bedded shale impacted by a high-pressure abrasive water jet[J]. Powder Technology, 2022, 397, 1-15.
[14] 米建宇,黄飞,李树清,王荣荣,李丹.基于SPH-FEM耦合算法的后混合磨料水射流冲击破岩数值模拟研究[J].振动与冲击,2021,40(16):132-139.
MI Jianyu, HUANG Fei,LI Shuqing,et al. Numerical simulation of rock breaking by rear-mixed abrasive water jet based on an SPH-FEM coupling algorithm [J]. Journal of Vibration and Shock, 2021,40(16):132-139.
[15] XUE Yongzhi, SI Hu, CHEN Guohua. The fragmentation mech-anism of coal impacted by water jets and abrasive jets [J]. Powder Technology, 2020. 361: 849-859.
[16] REN Fushen, FANG Tiancheng, CHENG Xiaoze. Study on rock damage and failure depth under particle water-jet coupling impact. International Journal of Impact Engineering, 2020. 139.
[17] LIN Baiquan, et al., Response characteristics of coal subjected to coupling static and waterjet impact loads. International Journal of Rock Mechanics and Mining Sciences, 2018. 103: 155-167.
[18] 张东明,白鑫,尹光志,李树建,饶孜,何庆兵.低渗煤层液态CO_2相变射孔破岩及裂隙扩展力学机理[J].煤炭学报,2018,43(11):3154-3168.
ZHANG Dongming,BAI Xin,YIN Guangzhi,et al. Mechanism of breaking and fracture expansion of liquid CO2 phase change jet fracturing in low-permeability coal seam [J]. Journal of China Coal Society, 2018,43(11):3154-3168.
[19] Rupam Tripathi, Sergej Hloch, Somnath Chattopadhyaya, et al., Application of the pulsating and continous water jet for granite erosion [J]. International Journal of Rock Mechanics and Mining Sciences, 2020. 126.
[20] 刘勇,代硕,魏建平,张宏图,徐向宇.低压磨料空气射流破硬岩规律及特征实验研究[J].岩石力学与工程学报,2022,41(06): 1172-1182.
Liu Yong, Dai Shuo, Wei Jianping, Zhang Hongtu, Xu Xiangyu. Experimental study on hard rock breaking laws and characteristics bylow-pressure abrasive air jet [J]. Chinese Journal of Rock Mechanics and Engineering, 2022, 41(06): 1172-1182.
[21] 孙浩,陈帅军,金爱兵,朱东风.含裂隙类岩石试样单轴抗压强度特征及裂纹演化规律[J].东北大学学报(自然科学版),2022, 43(03):404-413.
SUN Hao,CHEN Shuaijun,JIN Aibing,et al. Uniaxial Compres-sive Strength Characteristics and Crack Evolution Laws of Rock-Like Samples with Flaws[J].Journal of Northeastern Uni-versity (Natural Science), 2022,43(03):404-413.
[22] 秦楠,张作良,冯学志,刘亚琦,崔立桩,王永岩.蠕变作用后裂隙类岩石单轴强度和裂纹扩展规律研究[J].煤炭科学技术,2020,48(12):244-249.
QIN Nan,ZHANG Zuoliang,FENG Xuezhi,et al. Study on uniaxial strength and crack propagation law of cracked similar rock after creep [J]. Coal Science and Technology,2020,48(12): 244-249.
