基于三维扫描的水射流冲击下再生混凝土断面形貌特征分析

摘要
图/表
参考文献(48)
相关文章 (15)

全文: PDF (3038 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要国内每年因旧建筑物拆除产生的建筑垃圾超过17亿吨，造成建筑垃圾快速增长的主要原因是现有拆除方式侧重于高效拆除和定向倒塌，而忽略了对于混凝土原材料和构件再利用性能的保留。将混凝土旧建筑物中仍具备再利用价值的主要承重构件无损拆除，作为再生混凝土构件再利用成为目前研究的重点问题。再生混凝土断面粗糙度直接影响新旧混凝土构件的界面连接性能，基于此考虑，本文开展了高压磨料水射流拆除混凝土旧建筑物的试验研究，提出了一种基于三维扫描数据在宏观层面定量分析混凝土断面粗糙度的简单计算方法，对比分析了水射流冲击下普通混凝土和加速老化混凝土的断面形貌特征，使用扫描电子显微镜观察了混凝土骨料与水泥浆体结合状态的微观特征。结果表明：水射流冲击下，普通混凝土断面纹理深度为0~4.0 mm，加速老化影响了混凝土的破碎效率，面对水射流冲击时纹理深度提升了0.5~1.0 mm。基于点云重构封闭曲面数据计算的普通混凝土断面粗糙度在1.11到1.19之间，加速老化混凝土的断面粗糙度普遍提升了4.0%到14.9%。水射流冲击下的混凝土破坏模式主要以压缩剪切和拉伸剪切破坏为主，断面区域大致可分为光滑区、过渡区和撕裂区。研究结果可为水射流拆除混凝土旧建筑物的工艺优化和工程应用提供指导。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	潘超1
	王泽峰1
	2
	蒋宇涛1
	钟金文1

关键词 ：高压磨料水射流, 混凝土, 断面形貌, 粗糙度, 三维扫描

Abstract：In China, more than 1.7 billion tons of construction wastes are generated each year due to the demolition of old buildings. The main reason for the rapid growth of construction wastes is that the existing demolition methods focus on efficient demolition or directional collapse, without considering the retention of the mechanical performances of concrete materials or components. Therefore, the reuse of the main load-bearing components as the recyclable concrete materials in old buildings has become a key issue. Fracture surface morphology of the recycled concrete brings significant effects on the connection performances of the recycled concrete components. Towards improving the reusability of the recycled concrete, this work presents a high-pressure abrasive water jet method to demolish old buildings. A simple method to quantitatively calculate the fracture surface roughness in macro-level based on three-dimensional (3D) scanning was proposed, the fracture surface morphology of the recycled concrete under water jet impact was analyzed. Furthermore, scanning electron microscope was employed to observe the microscopic characteristics of the adhesion of cement onto aggregates in micro-level. Results show the fracture surface texture depth of the non-treated concrete ranged from 0 to 4.0 mm based on 3D scanning. Accelerated aging could promote the removal efficiency of concrete, by increasing the texture depth by 0.5 to 1.0 mm under water jet impact. Based on the reconstructed 3D scanning data, the calculated fracture surface roughness of the non-treated concrete was between 1.11 and 1.19, and the roughness of accelerated aged concrete generally increased by 4.0% to 14.9%. Failure mechanisms of concrete under water jet impact mainly involved compressive shearing failure and tensile shearing failure. Fracture surfaces of concrete by water jet impact could be roughly divided to be the smooth region, the transition region and the tearing region. Research results can provide guidelines for process optimization of old building demolition by water jet.

Key words： high-pressure abrasive water jet concrete fracture surface morphology roughness three-dimensional scanning

收稿日期: 2022-08-25 出版日期: 2023-11-28

引用本文:

潘超1，王泽峰1,2，蒋宇涛1，钟金文1. 基于三维扫描的水射流冲击下再生混凝土断面形貌特征分析[J]. 振动与冲击, 2023, 42(22): 193-203.
PAN Chao1,WANG Zefeng1,2,JIANG Yutao1,ZHONG Jinwen1. Fracture surface morphology analysis of recycled concrete under water jet impact based on three-dimensional scanning. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(22): 193-203.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2023/V42/I22/193

[1] Vivian W Y T, Mahfooz S, Ana C J E. A review of recycled aggregate in concrete applications (2000-2017)[J]. Construction and Building Materials, 2018(172): 272-292.
[2] 赵军，刘秋霞，林立清，等. 大城市建筑垃圾产生特征演变及比较[J]. 中南大学学报（自然科学版），2013, 44(3): 1297-1304.
ZHAO Jun, LIU Qiuxia, LIN Liqing, et al. Evolution and comparison of construction waste of large cities in China[J]. Journal of Central South University (Science and Technology), 2013, 44(3): 1297-1304.
[3] Hossein S, Farhad A. Durability properties evaluation of self-compacting concrete prepared with waste fine and coarse recycled concrete aggregates[J]. Construction and Building Materials, 2020(236): 117540.
[4] Zhang C, Hu M, Maio F D, et al. An overview of the waste hierarchy framework for analyzing the circularity in construction and demolition waste management in Europe[J]. Science of the Total Environment, 2022(803): 149892.
[5] 张军辉，丁乐，张安顺. 建筑垃圾再生料在路基工程中的应用综述[J]. 中国公路学报，2021, 34(10): 135-154.
ZHANG Junhui, DING Le, ZHANG Anshun. Application of recycled aggregates from construction and demolition waste in subgrade engineering: a review[J]. China Journal of Highway and Transport, 2021, 34(10): 135-154.
[6] 李强，刘洋，申玲. 基于复杂网络的动态建筑垃圾处置设施网络布局[J]. 环境工程，2020, 38(12): 130-137.
LI Qiang, LIU Yang, SHEN Ling. Network layout of dynamic construction waste disposal facilities based on complex networks theory[J]. Environmental Engineering, 2020, 38(12): 130-137.
[7] Jakob L, Andreas G, Fritz K, et al. Potentials for a circular economy of mineral construction materials and demolition waste in urban areas: a case study from Vienna[J]. Resources, Conservation & Recycling , 2020(161): 104942.
[8] 金骥良，王中黔. 建筑物拆除爆破设计原理和方法[J]. 爆炸与冲击，1988, 8(2):139-145.
JIN jiliang, WANG Zhongqian. Design principles and methods of blasting for demolishing structures[J]. Explosion and Shock Waves, 1988, 8(2):139-145.
[9] Waris M, Mohad S L, Mohad F K, et al. Investigating the awareness of onsite mechanization in malaysian construction industry[J]. Procedia Engineering, 2014(77): 205-212.
[10] 孙岩，孙可伟，郭远臣. 再生混凝土的利用现状及性能研究[J]. 混凝土，2010(3): 105-107.
SUN Yan, SUN Kewei, GUO Yuanchen. Use and performance research of recycled concrete[J]. Concrete, 2010(3): 105-107.
[11] Vsevolod M, Carlos E W, Kirill A, et al. Endless extension of life cycle of construction and demolition wastes as the most efficient environmental technology[J]. Environmental Technology & Innovation, 2021(24): 101824.
[12] Benjamin S, Christopher R, Carl H, et al. A framework for BIM-based disassembly models to support reuse of building components[J]. Resources, Conservation & Recycling, 2021(175): 1-15.
[13] 贡小雷，张玉坤. 物尽其用——废旧建筑材料利用的低碳发展之路[J]. 天津大学学报(社会科学版)，2011, 13(2): 138-144.
GONG Xiaolei, ZHANG Yukun. To the best of its use—road to low carbon development of used building materials[J]. Journal of Tianjin University(Social Sciences), 2011, 13(2): 138-144.
[14] Wang Z F, Pan C, Jiang Y T, et al. Efficient separation of coarse aggregates and cement mortar in the recycled concrete by water jet demolition[J]. Materials Letters, 2023, 333: 133623.
[15] Alsoufi M S. State-of-the-art in abrasive water jet cutting technology and the promise for micro- and nano-machining[J]. International Journal of Mechanical Engineering and Applications, 2017, 5(1): 1-14.
[16] Wang Z F, Kang Y, Wang Z, et al. Recycling waste tire rubber by water jet pulverization: powder characteristics and reinforcing performance in natural rubber composites[J]. Journal of Polymer Engineering, 2018, 38 (1): 51-62.
[17] Yuvaraj N, Pradeep K M, Mugilvalavan M, et al. Abrasive water jet machining process: a state of art of review[J]. Journal of Manufacturing Processes, 2020(49): 271-322.
[18] 赵永赞，赵民. 磨料射流切割混凝土的机理及试验研究[J]. 混凝土，2003(12): 29-32.
ZHAO Yongzan, ZHAO Min. Experimental research on mixed abrasive water jet cutting concrete[J]. Concrete, 2003(12): 29-32.
[19] 李自光，赵尧云，周小峰，等. 高压水射流数值模拟及混凝土路面切割试验研究[J]. 中国机械工程，2006(S2): 89-91, 95.
LI Ziguang, ZHAO Yaoyun, ZHOU Xiaofeng, et al. Theory & examination of high-pressure water jet cutting for cement concrete surface road[J]. China Mechanical Engineering, 2006(S2): 89-91, 95.
[20] 刘佳亮，张娣，王梦瑾. 水力冲击混凝土裂纹扩展机理及CT尺度损伤研究[J]. 振动与冲击，2019, 38(11): 68-74.
LIU Jialiang, ZHANG Di, WANG Mengjin. Crack evolution mechanism and CT scale damage characteristics in concrete under hydraulic impacting[J]. Journal of Vibration and Shock, 2019, 38(11): 68-74.
[21] 刘佳亮，李坤元，张娣. 高压水射流冲蚀混凝土破碎区演进特征及裂纹扩展规律研究[J]. 振动与冲击，2019, 38(24): 131-137.
LIU Jialiang, LI Kunyuan, ZHANG Di. Broken area evolution characteristics and crack propagation rules of concrete under high pressure water jet crushing[J]. Journal of Vibration and Shock, 2019, 38(24): 131-137.
[22] 刘佳亮，张娣，杜书健，等. 水力冲击内蕴初始裂纹混凝土致裂机理[J]. 振动与冲击，2020, 39(14): 130-135, 141.
LIU Jialiang, ZHANG Di, DU Shujian, et al. Crack formation mechanism of concrete with an initial crack under hydraulic impacting[J]. Journal of Vibration and Shock, 2020, 39(14): 130-135, 141.
[23] 鲁飞，陈正文，薛胜雄，等. 摆振水射流破碎混凝土技术研究[J]. 流体机械，2019, 47(12): 51-55.
LU Fei, CHEN Zhengwen, XUE Shengxiong, et al. Research on the technology of concrete crushing by shaking water jet[J]. Fluid Machinery, 2019, 47(12): 51-55.
[24] Liu J L, Du S J, Xue Y Z. Study on the breaking process and damage characteristics of abrasive water jet impacting concrete based on acoustic emission[J]. Construction and Building Materials, 2020(262): 120085.
[25] 王梦瑾，刘佳亮，张娣. 高压水射流破除钢筋混凝土力学机制研究[J]. 混凝土，2020(12): 127-131, 137.
WANG Mengjin, LIU Jialiang, ZHANG Di. Study on mechanics mechanism of high pressure water jet removing reinforced concrete[J]. Concrete, 2020(12): 127-131, 137.
[26] 杨清文，王晓敏. 前混合磨料水射流切割钢板和混凝土的实验研究[J]. 兵工学报，2005, 26(1): 133-135.
YANG Qingwen, WANG Xiaomin. Experimental study on the cutting of steel and concrete with the pre-mixed abrasive jet[J]. Acta Armamentarii, 2005, 26(1): 133-135.
[27] Libor S, Lenka B, Jaroslav V, et al. Effects of water jet on heat-affected concretes[J]. Procedia Engineering, 2013(57): 1036-1044.
[28] 彭见辉，邓三鹏，殷素峰，等. 超高压水力破拆混凝土参数分析[J]. 机床与液压，2019, 47(7): 25-28.
PENG Jianhui, DENG Sanpeng, YIN Sufeng, et al. Analysis of concrete dismantling parameters with ultra-high pressure water[J]. Machine Tool ＆ Hydraulics, 2019, 47(7): 25-28.
[29] 李坤元，刘佳亮. 磨料水射流多维参数对混凝土致裂性能影响特征[J]. 中国安全科学学报，2019, 29(10): 110-116.
LI Kunyuan, LIU Jialiang. Effects of multi-dimensional parameters of abrasive water jet on cracking concrete[J]. China Safety Science Journal, 2019, 29(10): 110-116.
[30] 姚远航，袁瑞甫，秦博，等. 前混合高压磨料水射流对混凝土块的切割试验研究[J]. 河南理工大学学报（自然科学版），2022, 41(3): 159-164.
YAO Yuanhang, YUAN Ruifu, QIN Bo, et al. Experimental study on the cutting of concrete blocks by premixed high pressure abrasive water jet[J]. Journal of Henan Polytechnic University(Natural Science), 2022, 41(3): 159-164.
[31] Josef F, Libor S, Branislav S, et al. Utilization of ultrasound to enhance high-speed water jet effects[J]. Ultrasonics Sonochemistry, 2004(11): 131-137.
[32] 庄欠伟，袁一翔，徐天明，等. 射流联合盾构切削钢筋混凝土仿真与试验[J]. 岩土工程学报，2020, 42(10): 1817-1824.
ZHUANG Qianwei, YUAN Yixiang, XU Tianming, et al. Simulation and experiment on cutting reinforced concrete with jet combined shield method[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(10): 1817-1824.
[33] 汤积仁，姚奇，章文峰，等. 逐级递进射流冲击破碎废弃混凝土分离骨料可行性试验[J]. 中国石油大学学报（自然科学版），2022, 46(2): 121-126.
TANG Jiren, YAO Qi, ZHANG Wenfeng, et al. Experiment on feasibility of separating aggregate from waste concrete by progressive jet impingement[J]. Journal of China University of Petroleum(Edition of Natural Science), 2022, 46(2): 121-126.
[34] Bochen J, Slusarek J. Analysis of resistance to accelerated aging of the top layer of small-sized concrete elements. A case study[J]. Construction and Building Materials, 2020(264): 120211.
[35] Thomas C, Tamayo P, Setien J, et al. Effect of high temperature and accelerated aging in high density micro-concrete[J]. Construction and Building Materials, 2021(272): 121920.
[36] Abouhouraira A, Ouali A, Elhammoumi O, et al. Effect of accelerated ageing by cyclic variations of temperature and humidity on shrinkage of concretes[J]. Materials Today: Proceedings, 2020(31): S149-S155.
[37] Delannoy G, Marceau S, Gle P, et al. Durability of hemp concretes exposed to accelerated environmental aging[J]. Construction and Building Materials, 2020(252): 119043.
[38] Wang L, Zhang S, Zhao G. Investigation of the mix ratio design of lightweight aggregate concrete[J]. Cement and Concrete Research, 2005(35): 931-935.
[39] Habibi A, Ghomashi J. Development of an optimum mix design method for self-compacting concrete based on experimental results[J]. Construction and Building Materials, 2018(168): 113-123.
[40] Bidabadi M S, Akbari M, Panahi O. Optimum mix design of recycled concrete based on the fresh and hardened properties of concrete[J]. Journal of Building Engineering, 2020(32): 101483.
[41] Chen H, Hu Y, Liu J W, et al. Surface characteristics analysis of fractures induced by supercritical CO2 and water through three-dimensional scanning and scanning electron micrography[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2021, 13(5): 1047-1058.
[42] Xie H, Wang J A, Stein E. Direct fractal measurement and multifractal properties of fracture surfaces[J]. Physics Letters, 1998(242): 41-50.
[43] EI-Soudani S M. Profilometric analysis of fractures[J]. Metallography, 1978, 11(3): 247-336.
[44] 殷雨时，范颖芳，徐义洪. 粗糙度对CFRP-混凝土界面剪切黏结性能的影响[J]. 建筑材料学报，2018, 21(2): 202-207.
YIN Yushi, FAN Yingfang, XU Yihong. Roughness effects on the shear bonding properties of interface between CFRP and concrete[J]. Journal of Building Materials, 2018, 21(2): 202-207.
[45] 王永洪，张明义，刘俊伟，等. 接触面粗糙度对黏性土-混凝土界面剪切特性影响研究[J]. 工业建筑，2017, 47(10): 93-97.
WANG Yonghong, ZHANG Mingyi, LIU Junwei, et al. Effect of interface roughness on interfacial shear properties of clayey soil-concrete[J]. Industrial Construction, 2018, 21(2): 202-207.
[46] Wang Z F, Jiang Y T, Pan C. Mechanochemical devulcanization of waste tire rubber in high pressure water jet pulverization[J]. Progress in Rubber, Plastics and Recycling Technology, 2021, 37(4): 279-300.
[47] Chen H, Li Z, Gao Z, et al. Numerical investigation of rock breaking mechanisms by high pressure water jet[J]. Procedia Engineering, 2015(126): 295-299.
[48] Ren F S, Fang T C, Cheng X Z. Study on rock damage and failure depth under particle water-jet coupling impact[J]. International Journal of Impact Engineering, 2020(139): 103504.