Performance tests of rotating-amplification type friction self-centering brace and its restoring force model verification
WANG Debin1, ZHANG Xinyue1, FU Xing2, WANG Wenming3, LIU Lu4
1. School of Civil Engineering, Dalian Jiaotong University, Dalian 116028, China;
2. Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China;
3. School of Civil Engineering , Shandong Jianzhu University, Jinan 250101, China；
4. Beijing Municipal Road & Bridge Group Co.，Ltd.，Beijing 100032, China
Abstract：A friction self-centering brace with displacement amplification function (SC-DAFB) is proposed to address the insufficient energy dissipation capacity of traditional self-centering braces and the self-centering capacity of displacement amplification dampers. SC-DAFB is based on the working mechanism of bridge amplification and has a basic structure and working mechanism that are explained in detail. The formula for calculating the restoring force of the brace at each loading stage is derived, and the low-cycle reciprocating loading test of 6 groups of SC-DAFB under different working conditions is carried out. The key mechanical properties of SC-DAFB, such as load bearing capacity, hysteresis curve, energy dissipation and residual displacement, are obtained and compared. The results show that reducing the initial amplification Angle can effectively improve the bearing capacity and energy dissipation performance of the brace. When the self-centering ratio is 1.3, the yield load and maximum load of the brace at the initial amplification angle of 30° increase by 47.6% and 29.4%, respectively, compared with the brace without displacement amplification. The theoretical calculation and the experimental results show good agreement, verifying the accuracy of the theoretical restoring force model.
王德斌1，张昕岳1，付兴2，王文明3，刘璐4. 旋转放大型摩擦自复位支撑性能试验及恢复力模型验证[J]. 振动与冲击, 2024, 43(9): 8-17.
WANG Debin1, ZHANG Xinyue1, FU Xing2, WANG Wenming3, LIU Lu4. Performance tests of rotating-amplification type friction self-centering brace and its restoring force model verification. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(9): 8-17.
[1] Yan X, Alam M S, Shu G,et al. A novel self-centering viscous damper for improving seismic resilienc-e: Its development, experimentation, and system res-ponse[J]. Engineering Structures,2023,279: 115632.
[2] Darani F M, Zarnani P, Quenneville P. Developmentof a new self-centering structural connector for seism ic protection of structures[J]. Journal of Constructional Steel Research, 2022,189: 107064.
[3] 张艳霞，黄威振，刘安然，等. 自复位免修复摩擦耗能支撑性能研究[J].振动与冲击，2018,37(04):136-146+176.
ZHANG Yanxia, HUANG Zhenwei, LIU Anran,et al. A study on the behavior of self-centering and fr-ee-repair braces with friction dampers[J]. Journal of Vibration and Shock, 2018, 37(04): 136-146+176.
[4] Xie Q, Zhou Z, Zhang L. Influence of the rubber end plate on the hysteretic performance of SC-BRBs and structural seismic design[J]. Engineering Structures, 2021,242: 112475.
[5] Shams A S, Ghobadi M S. Development of a high-performance hybrid self-centering building for seismic resilience[J]. Engineering Structures, 2021, 226: 111382.
[6] Qiu C X, Liu J W, Du X L. Cyclic behavior of SMA slip friction damper [J]. Engineering Structures,2022, 250: 113407.
[7] 毕仲君，胡志强，王琪，等. 基于新型自复位摩擦耗能支撑的RC框架结构地震残余变形控制[J].振动与冲击，2020,39(15): 95-102.
BI Zhongjun, HU Zhiqiang, WANG Qi,et al. Seis-mic residual deformation control for RC frame structures based on a novel self-centering friction damping brace[J]. Journal of Vibration and Shock, 2020,39(15):95-102.
[8] Ye Q X, Wang Z Y, Wang Y Q. Numerical study on seismic performance of prefabricated steel frames with recentering energy dissipative braces [J]. Engineering Structures, 2020, 207: 110223.
[9] 陈云,陈超,徐子凡. 具有自复位功能的金属耗能阻尼器抗震性能研究[J]. 振动与冲击，2021, 40(23): 25-31.
CHEN Yun, CHEN Chao, XU Zifan. Aseismic performance of metal energy-dissipating damper with self-centering function[J]. Journal of Vibration and Shock, 2021, 40(23): 25-31.
[10] JIANG H, SONG G S, HUANG L,et al. Develop-ment and application of a deformation-amplified self-centering energy dissipation device [J]. EngineeringStructures, 2023, 280: 115671.
[11] Xie X S, Xu L H, Li Z X. Modeling of magnetorheological self-centering brace [J]. Journal of Engin-eering Mechanics, 2020, 146(1): 04019112.
[12] 周颖,申杰豪,肖意. 自复位耗能支撑研究综述与展望[J].建筑结构学报，2021, 42(10):1-13.
(ZHOU Ying, SHEN Jiehao, XIAO Yi. State-of-the-art on self-centering energy dissipative braces[J]. Journal of Building Structures, 2021, 42(10):1-13. (in Chinese))
[13] 金双双，李盈开，周建庭，等. 全装配式自复位防屈曲支撑滞回模型及其性能试验研究[J].工程力学，2022,39(07):49-57.
(JIN Shuangshuang, LI Yingkai, ZHOU Jianting,et al. Hysteresis model and experimental investigation of assembled self-centering buckling-restrained braces[J]. Engineering Mechanics, 2022, 39(07):49-57. (in Chinese))
[14] MAO H M, YAN X Y, WEI X Y,et al. Seismic analysis of a frame structure equipped with displ-acement-amplified torsional dampers [J]. Structures, 2022, 41: 190-202.
[15] 赵桂峰，马玉宏. 阻尼器响应放大技术研究与应用进展[J].土木工程学报，2020,53(06):64-78.
(ZHAO Guifeng, MA Yuhong. Research and application progress of damper response amplification technology[J]. China Civil Engineering Journal, 2020, 53(06):64-78. (in Chinese))
[16] HE W F, XU H, XU Z D,et al. Experimental Investigation and Earthquake Response Analysis of a Multilayer Viscous Damping Wall With Amplified Deformation [J]. Engineering Structures, 2022, 251: 113427.
[17] 赵子龙，赵桂峰，张晶晶，等. 凸轮式响应放大金属阻尼器单自由度体系地震反应分析[J]. 工程力学，2022, 39(S01):129-137.
ZHAO Zilong, ZHAO Guifeng, ZHANG Jingjing,et al. Seismic response of cam response amplifier with metallic damper structural system [J]. Engineering Mechanics, 2022, 39(S01):129-137. (in Chinese)
[18] 黄宙，李宏男，付兴. 自复位放大位移型SMA阻尼器优化设计方法研究[J]. 工程力学，2019, 36(6):202-210.
HUANG Zhou, LI Hongnan, FU Xing. Optimum design of a re-centering deformation-amplified S-MA damper [J]. Engineering Mechanics, 2019, 36(6):202-210. (in Chinese)
[19] 王德斌，何杰，孙治国，等. 具有位移放大功能的摩擦自复位支撑及其在双柱式桥墩中的应用[J].振动与冲击，2023, 42(02): 51-59.
WANG D B, HE J, SUN Z G,et al. New Type of Friction Self-Centering Brace With Displacement Amplification Function and Its Application in Double Column Piers [J]. Journal of Vibration and Shock, 2023, 42(02): 51-59. (in Chinese)
[20] ZHANG Z H, BI K M, HAO H,et al. Development of a novel deformation-amplified shape memory alloy-friction damper for mitigating seismic responses of RC frame buildings [J]. Engineering structures, 2020, 216: 110751.1-110751.19.
[21] LI J P, WU B, WANG Z,et al. Concept, analysis, and test of a self-centering viscous damper with displacement capacity enhancement [J]. Earthquake Engineering & Structural Dynamics, 2022, 51(11)：2791-2810.
[22] LI D, ZHOU Y. A force-resisting rotary friction damper (RFD): Verification and comparison with traditional RFD [J]. Engineering Structures, 2022, 273: 115015.
[23] MONIR H S, ZEYNALY K. A modified friction damper for diagonal bracing of structures[J]. Journal of Constructional Steel Research, 2013, 87: 17-30.
[24] Seismic provisions for structural steel buildings: AISC 341－10 [S]. Chicago: AISC,2010．
[25] GB/T 1972-2005 蝶形弹簧 [S].北京: 中国标准出版社.2005.
GB/T 1972-2005 Disc spring[S]. Beijing: China Standards Press, 2005. (in China)
