功能可恢复强脊框架结构抗震性能研究

摘要
图/表
参考文献(31)
相关文章 (15)

全文: PDF (2336 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要基于强脊机制、损伤控制和可更换等理念，提出新型震后功能可快速恢复强脊框架结构体系。为考察功能可恢复强脊框架结构抗震性能及震后可恢复性能，运用Sap2000软件对5个结构模型进行推覆分析，重点研究强脊框架结构的损伤机制、损伤演化、变形特征、抗震性能和震后可恢复性能等。提出不同水平地震作用下结构残余变形两阶段计算分析方法，以此评估结构震后的可恢复性能。计算结果表明，强脊系统可有效控制结构侧向变形，结构的层间位移角和损伤分布均匀，有效避免薄弱层破坏机制的形成，提升结构的抗震性能和抗倒塌性能。强脊系统能有效调动整体结构部件的能力储备，使结构具有更好的整体性。设置强脊系统的框架结构刚度、承载力、耗能能力等均得到明显提升，推覆曲线未出现承载力软化行为。经合理分级损伤设计，在强脊框架中设置可更换耗能件在地震中起到第一道防线作用，有效减小主体结构损伤和残余变形，显著提升结构的震后可恢复性能。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	黄群贤1
	2
	林聪颖1
	2
	刘洋1
	2
	黄军3

关键词 ：功能可恢复, 强脊系统（SBS）, 可更换耗能件, 推覆分析, 损伤控制, 残余变形

Abstract：Based on the strongback mechanism, damage control, and replaceable concept, an innovative earthquake resilient strongback-frame structure is proposed to minimize earthquake-induced damage and facilitate quick and economical post-earthquake repairs. To investigate the seismic performance and resilience of the strongback-frame structure, pushover analysis on five structural models was conducted with Sap2000 software. Particular emphasis was taken on the damage mechanism, damage evolution, deformation characteristics, seismic performance, and seismic resilience of the strongback-frame structure. A two-stage calculation method for the residual deformation is proposed to evaluate the seismic resilience of structures subjected to different magnitude earthquakes. The results show that the strongback system can effectively control the lateral deformation pattern of the structure, and the story drift ratio and damage distribute uniformly, which can avoid the formation of the weak-story failure mechanism and improve the seismic performance and collapse resistance of the structure. The strongback system can also effectively mobilize the reserve capacity of the overall structural components, which enhances the overall performance. The stiffness, strength, and energy consumption capacity of the strongback frame are significantly improved, and the pushover curves do not appear the strength softening behavior. After reasonably graded damage design, the replaceable energy dissipation components set in the strongback frame play the first line of defense role to reduce the structural damage and residual deformation, effectively improving the structure's seismic resilience.

Key words： earthquake resilience strongback system(SBS);replaceable energy dissipation component pushover analysis damage control residual deformation

收稿日期: 2023-04-03 出版日期: 2024-03-28

引用本文:

黄群贤1,2，林聪颖1,2，刘洋1,2，黄军3. 功能可恢复强脊框架结构抗震性能研究[J]. 振动与冲击, 2024, 43(6): 1-10.
HUANG Qunxian1,2，LIN Congying1,2，LIU Yang1,2，HUANG Jun3. Seismic performance of an earthquake resilient strongback-frame structure. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(6): 1-10.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2024/V43/I6/1

[1] BRUNEAU M, MACRAE G A. Reconstructing Christchurch: a seismic shift in building structural systems[R]. Quake Center Report, University of Canterbury, Christchurch, New Zealand, 2017. [2] 陆新征, 曾翔, 许镇, 等. 建设地震韧性城市所面临的挑战[J]. 城市与减灾, 2017(04): 29-34. LU Xinzheng, ZENG Xiang, XU Zhen, et al. The challenges of building earthquake-resilient cities[J]. City and Disaster Reduction, 2017(04): 29-34. [3] 吕西林, 陈云, 毛苑君. 结构抗震设计的新概念—可恢复功能结构[J]. 同济大学学报 (自然科学版), 2011, 39(7): 941-948. LU Xilin, CHEN Yun, MAO Yuanjun. New Concept of Structural Seismic Design :Earthquake Resilient Structures[J]. Journal of Tongji University (Natural Science), 2011, 39(7): 941-948. [4] 吕西林. 可恢复功能防震结构：基本概念与设计方法[M]. 北京: 中国建筑工业出版社,2019:324-330 LU Xilin. Earthquake resilient structures basic concept and design methodology[M]. China Architecture & Building Press, 2019: 324-330. [5] 周颖, 吕西林. 摇摆结构及自复位结构研究综述[J]. 建筑结构学报, 2011, 32(9): 1-10. ZHOU Ying, LU Xilin. State-of-the-art on rocking and self-centering structures[J]. Journal of Building Structures, 2011, 32(9): 1-10. [6] 吕西林, 陈聪. 带有可更换构件的结构体系研究进展[J].地震工程与工程振动,2014,34(01):27-36. LU Xilin, CHEN Cong. Research progress in structural systems with replaceable members[J]. Earthquake Engineering and Engineering Vibration, 2014,34(01):27-36. [7] CHANCELLOR N B, EATHERTON M R, ROKE D A, et al. Self-centering seismic lateral force resisting systems: high performance structures for the city of tomorrow[J]. Buildings, 2014, 4(3): 520-548. [8] CLAYTON P M, DOWDEN D M, LI C H, et al. Self-centering steel plate shear walls for improving seismic resilience[J]. Frontiers of Structural and Civil Engineering, 2016, 10(3): 283-290. [9] ERKMEN B AND SCHULTZ E A. Self-centering behavior of unboned post-tensioned precast concrete shear walls[J]. Journal of Earthquake Engineering, 2009,13(7): 1047-1064. [10] LU X, MAO Y, CHEN Y, et al. New structural system for earthquake resilient design[J]. Journal of Earthquake and tsunami, 2013, 7(03): 1350013. [11] 刘阳, 郭子雄, 贾磊鹏, 等. 震损可更换组合柱抗震性能试验研究[J]. 建筑结构学报,2020,41(07):45-54. LIU Yang, GUO Zixiong, JIA Leipeng, et al. Experimental study on seismic performance of innovative replaceable composite columns[J]. Journal of Building Structures, 2020,41(07):45-54. [12] 纪晓东, 王彦栋, 马琦峰, 等. 可更换钢连梁抗震性能试验研究[J]. 建筑结构学报, 2015, 36(10): 1-10. Ji Xiaodong, Wang Yandong, Ma Qifeng, et al. Experimental study on seismic behavior of replaceable steel coupling beams[J]. Journal of Building Structures， 2015, 36(10): 1-10. [13] Jiang, Qing; Liu, Yibo; Feng, Yulong， et al. Cyclic Testing of Earthquake-resilient Steel Joints with a Replaceable Buckling-restrained Link[J]. Journal of Earthquake Engineering, 2022, 26(13): 6676-6702. [14] OZAKI F, KAWAI Y, KANNO R, et al. Damage-control systems using replaceable energy-dissipating steel fuses for cold-formed steel structures: seismic behavior by shake table tests[J]. Journal of Structural Engineering, 2012, 139(5): 787-795. [15] 曲哲, 叶列平. 摇摆墙-框架体系的抗震损伤机制控制研究[J]. 地震工程与工程振动, 2011, 31(4): 40-50. QU Zhe, YE Lie ping. Seismic damage mechanism control of rocking wall-frame system[J]. Earthquake Engineering and Engineering Vibration, 2011, 31(4): 40-50. [16] 吴守君, 潘鹏. 摇摆填充墙-框架结构抗震性能研究[J].建筑结构学报, 2015, 36(10): 81-87. WU Shoujun, PAN Peng. Seismic performance evaluation of rocking infilled wall-frame structure[J]. Journal of Building Structures, 2015, 36(10): 81-87. [17] Qu Z, Wada A, Motoyui S, et al. Pin-supported walls for enhancing the seismic performance of building structures[J]. Earthquake engineering & structural dynamics, 2012, 41(14): 2075-2091. [18] 董金芝, 李向民, 张富文, 等. 基于SMA装置的框架-受控摇摆墙结构抗震性能试验研究[J].土木工程学报, 2019, 52(04): 41-51. Dong Jinzhi, Li Xiangmin, Zhang Fuwen, et al. Experimental study on seismic performance of frame-controlled rocking wall structures using SMA devices[J]. China Civil Engineering Journal, 2019, 52(04): 41-51. [19] 冯玉龙, 吴京, 孟少平, 等. 底部带有屈曲约束支撑的摇摆墙框架结构抗震性能分析[J]. 振动与冲击, 2016, 35(23): 35-40. FENG Yulong, WU Jing, MENG Shaoping, et al. Aseismic performance analysis of rocking wall frame structures with buckling-restrained braces in base[J]. Journal of Vibration and Shock, 2016, 35(23): 35-40. [20] EATHERTON M R, MA X, KRAWINKLER H, et al. Design Concepts for Controlled Rocking of Self-Centering Steel-Braced Frames[J]. Journal of Structural Engineering. 2014, 140(11):04014082. [21] 武大洋, 吕西林. 近场地震动作用下复合自复位结构考虑残余位移的性能评估[J]. 土木工程学报, 2018, 51(1): 32-40. Wu Dayang Lu Xilin. Performance assessment of self-centering dual systems considering residual displacement under near-field ground motions. China Civil Engineering Journal, 2018, 51(1): 32-40. [22] 刘小娟, 刘阳, 黄泽伟, 等. 震后可恢复功能摇摆柱抗震性能试验研究[J]. 建筑结构学报, 2021, 42(8): 204-212. LIU Xiaojuan, LIU Yang, HUANG Zewei, et al. Experimental study on seismic performance of earthquake resilient rocking column. Journal of Building Structures, 2021, 42(8): 204-212. [23] 李国强, 张文津, 王彦博等. 双段消能摇摆结构体系的地震反应特性研究[J]. 振动与冲击, 2021, 40(5): 92-101. LI Guoqiang, ZHANG Wenjin, WANG Yanbo, et al. Seismic response characteristics of dual-stage energy dissipation rocking structure system. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(5): 92-101. [24] 虞终军, 李歆, 王建峰, 等. 某超高层办公楼结构抗震可恢复性能设计[J]. 建筑结构学报, 2022, 43(8): 45-55. YU Zhongjun, LI Xin, WANG Jianfeng, et al. Seismic resilience design of a super high-rise office building. Journal of Building Structures, 2022, 43(8): 45-55. [25] LAI J W, MAHIN S A. Strongback system: A way to reduce damage concentration in steel-braced frames[J]. Journal of Structural Engineering, 2014, 141(9): 04014223. [26] SIMPSON B G, MAHIN S A. Experimental and Numerical Investigation of Strongback Braced Frame System to Mitigate Weak Story Behavior[J]. Journal of structural engineering, 2018, 144(2):04017211. [27] 建筑抗震设计规范 GB50011-2010[S]. 北京: 中国建筑工业出版社, 2010. Code for seismic design of buildings. GB50011-2010[S]. Beijing: China Architecture & Building Press, 2010. [28] Federal Emergency Management Agency. Prestandard and commentary for the seismic rehabilitation of buildings: FEMA356[S]. Washington DC: Federal Emergency Management Agency,2000. [29] 周颖, 顾安琪. 自复位剪力墙结构四水准抗震设防下基于位移抗震设计方法[J]. 建筑结构学报, 2019, 40(3): 118-126. ZHOU Ying, GU Anqi. Displacement-based seismic design of self-centering shear walls under four-level seismic fortifications. Journal of Building Structures, 2019, 40(3): 118-126. [30] MCCORMICK J, ABURANO H, IKENAGA M, et al. Permissible residual deformation levels for building structures considering both safety and elements[C]// Proceedings of the 14th Word Conference on Earthquake Engineering. Tokyo: International Association for Earthquake Engineering,2008: 12-17. [31] HENRY R S, SRITHARAN S, INGHAM J M. Residual drift analyses of realistic self-centering concrete wall systems[J]. Earthquakes & Structures, 2016, 10(2):409-428.