1.State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072；2. Xiamen Port Development & Construction Co.,Ltd., Xiamen 361012
Abstract：Deconvolution is a main method for improving the seismic recording resolution. Its basic idea can be applied to the signal processing of the testing on the high-piled beam piled. The wharf piles were simulated by LS-DYNA explicit analysis method and the Low-strain Reflected Wave Method was used in the detection. Then, the testing signal was analysised by the Deconvolution Method. The numerical results illustrate that the Deconvolution Method can effectively restore the practical status of the pile and solve the problem that the defects signal can’t be identified when hammered on the panel. It provides a new way in the signal processing of the testing on the high-piled beam piled.
王元战;楚东堂;陈楠楠;邵帅. 高桩码头桩基检测信号分析中的反褶积应用[J]. , 2014, 33(15): 1-7.
WANG Yuan-zhan CHU Dong-tang CHEN Nan-nan SHAO Shuai . THE APPLICATION OF DECONVOLUTION METHOD ON THE SIGNAL PROCESSING OF THE TESTING ON THE HIGH-PILED BEAM PILED. , 2014, 33(15): 1-7.
2014, Vol. 33 
