Finite element analysis of impact behaviors for biogradable plant fibre bowl with foam cushioning packaging
In order to investigate the impact responses of biogradable bowl made of plant fibre and also evaluate damage mode of this type of products, finite element model of bowl with foam cushioning packaging subjected to drop impact loading conditions was established by ABAQUS/Explicit. Failure criterion and mesh deleting were introduced to study fracture law of plant fibre bowl under free fall loadings. Then the influences of drop velocity and the foam cushion on the dynamic responses of bowl were discussed, and the responses were compared with those of bowl without foam packaging included. Finally impact response of several bowl in sequence as a whole was investigated. It is noted that the effect of foam is noticeable, and avoids the damage extent to which the bowl may experience at the distribution environment.
Ningbo Institute of Technology，Zhejiang University，Ningbo 315100，China
Abstract：In order to investigate the impact responses of biogradable bowl made of plant fibre and also evaluate damage mode of this type of products, finite element model of bowl with foam cushioning packaging subjected to drop impact loading conditions was established by ABAQUS/Explicit. Failure criterion and mesh deleting were introduced to study fracture law of plant fibre bowl under free fall loadings. Then the influences of drop velocity and the foam cushion on the dynamic responses of bowl were discussed, and the responses were compared with those of bowl without foam packaging included. Finally impact response of several bowl in sequence as a whole was investigated. It is noted that the effect of foam is noticeable, and avoids the damage extent to which the bowl may experience at the distribution environment.
卢富德,高 德. 植物纤维餐具碗在运输包装环境抗冲击行为有限元分析[J]. 振动与冲击, 2015, 34(6): 137-139.
LU Fu-de,GAO De. Finite element analysis of impact behaviors for biogradable plant fibre bowl with foam cushioning packaging. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(6): 137-139.
[1] Newton R E. Fragility assessment theory and practice[R]. Monterey Research Laboratory, Inc. Monterey, Califonia,1968.
[2] Kim S C, Cho D G, Kim T G, et al.Finite element analysis for shock resistance evaluation of cushion-packaged multifunction printer considering internal modules[J]. Journal of Electronic Packaging, 2013, 135 (41001):1-6.
[3] Wang J, Wang Z W, Duan F, et al. Dropping shock response of corrugated paperboard cushioning packaging system[J]. Journal of Vibration and Control, 2013, 19(3): 336-340.
[4]Wang Z W,Jiang J H. Evaluation of product dropping damage based on key component[J].Packaging Technology and Science,2010,123(4):227-238.
[5] 高德,卢富德.基于杆式弹性易损部件的非线性系统跌落冲击研究[J].振动与冲击,2012,31 (15): 47-49.
GAO De, LU Fu-de. Drop impact analysis of packaging system with bar type elastic critical components[J].Journal of Vibration and Shock,2012,31 (15): 47-49.
[6]卢富德,陶伟明,高德.具有简支梁式易损部件的产品包装系统跌落冲击研究[J].振动与冲击,2012,31 (15): 79- 81.
LU Fu-de,TAO Wei-ming, GAO De.Drop impact analysis on item packaging system with beam type elastic critical component[J]. Journal of Vibration and Shock,2012,
31 (15): 79- 81.
[7] 卢富德，高德. 考虑蜂窝纸板箱缓冲作用的产品包装系统跌落冲击研究[J].振动工程学报，2012，25(3):335-341.
LU Fu-de, GAO De. Study on drop impact of packaging system considering the cushioning action of honeycomb
paperboard box[J].Journal of Vibration Engineering,2012, 25(3):335- 341.
[8] 高德，卢富德. 聚乙烯缓冲材料多自由度跌落包装系统优化设计.振动与冲击,2012,31(3):69-72.
GAO De, LU Fu-de. Optimization design of MDOF package cushioning system made of polyethylene[J]. Journal of Vibration and Shock,2012,31(3):69-72.
[9] 卢富德，陶伟明，高德.瓦楞纸板串联缓冲系统动力学响应[J].振动与冲击,2012 ,31 (21): 30-32.
LU Fu-de, TAO Wei-ming, GAO De. Dynamic response of a series cushioning packaging system made of multi- layer corrugated paperboard[J]. Journal of Vibration and Shock, 2012,31 (21): 30-32.
[10]高德,景全荣,徐锋. 玉米秸秆包装容器压缩性能分析[J].农业机械学报，2009,40(3):117-120.
GAO De,JING Quan-rong, XU Feng. Compression property analysis of plant straw packaging container[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(3):117-120,129.
[11] Gao D, Lu F D,Chen S J.Drop impact analysis of cushioning system with an elastic critical component of cantilever beam type[J].Mathematical Problems in Engineering, 2013 (376098):1-5.
[12] Sun G Y,Li G ,Hou S J. Crashworthiness design for functionally graded foam-filled thin-walled structures [J]. Materials Science and Engineering A,2010, 527(7/8): 1911- 1919.
[13] Lu F D,Tao W M,Gao D.Virtual mass method for solution of dynamic response of composite cushion packaging system[J].Packaging Technology and Science, 2013,26(S1):32-42.
[14]Grimaldi A, Sollo A, Guida M,et al. Parametric study of a SPH high velocity impact analysis-A birdstrike windshield application[J].Composite Structures, 2013, 96(1): 616-630
[15]张绍云,储火,卢富德,等.泡沫-蜂窝缓冲系统动力学有限元分析[J].振动与冲击,2014,33(2):1-5.
ZHANG shao-yun, CHU Huo, LU Fu-de, et al. Finite element analysis for dynamic response of cushioning system made out of foam and honeycomb structure[J]. Journal of Vibration and Shock, 2014,33(2):1-5.
