Analysis of engraving process of projectile based on the coupling of FEM and SPH
Based on the coupling algorithm of finite element method (FEM) and smoothed particle hydrodynamics method (SPH), the dynamic model of projectile-barrel coupling system was established. The numerical simulation of engraving process of projectile of heavy caliber gun was performed, which made up for the deficiencies of FEM which couldn’t simulate the large deformation of bearing band effectively and simulated the plastic flow of bearing band in the engraving process of projectile, and based on which, the stress and strain changing regular pattern of bearing band was intensively studied. The influences of initial loading angle of projectile, gap between tube and projectile and projectile not arriving the assign position on dynamic responses of projectile in engraving process were analyzed. As a result of comparing, the deformations of bearing bend in simulation and live firing have well consistency.
Northwest Institute of Mechanical & Electrical Engineering, Xianyang 712099, China
Abstract:Based on the coupling algorithm of finite element method (FEM) and smoothed particle hydrodynamics method (SPH), the dynamic model of projectile-barrel coupling system was established. The numerical simulation of engraving process of projectile of heavy caliber gun was performed, which made up for the deficiencies of FEM which couldn’t simulate the large deformation of bearing band effectively and simulated the plastic flow of bearing band in the engraving process of projectile, and based on which, the stress and strain changing regular pattern of bearing band was intensively studied. The influences of initial loading angle of projectile, gap between tube and projectile and projectile not arriving the assign position on dynamic responses of projectile in engraving process were analyzed. As a result of comparing, the deformations of bearing bend in simulation and live firing have well consistency.
马明迪,崔万善,曾志银,宁变芳,鲁玉祥. 基于有限元与光滑粒子耦合的弹丸挤进过程分析[J]. 振动与冲击, 2015, 34(6): 146-150.
MA Ming-di,CUI Wan-shan,ZENG Zhi-yin,NING Bian-fang,LU Yu-xiang. Analysis of engraving process of projectile based on the coupling of FEM and SPH. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(6): 146-150.
[1] 孙河洋,马吉胜,李伟,等. 坡膛结构变化对弹带挤进过程影响的研究[J]. 振动与冲击,2011, 30(3): 30-33.
SUN He-yang, MA Ji-sheng, LI Wei, et al. Influence of different bore structures on engraving process on projectile [J]. Journal of vibration and shock,2011, 30(3): 30-33.
[2] 许庆新. 基于SPH方法的冲击动力学若干问题研究[D]. 上海: 上海交通大学, 2009.
[3] 余丰. 基于SPH_FEM的磨粒加速过程及材料去除机理研究[D]. 济南: 山东大学, 2012.
[4] 王吉. 光滑粒子法与有限元的耦合算法及其在冲击动力学中的应用[D]. 合肥:中国科学技术大学, 2006.
[5] 肖毅华. 有限元法与光滑粒子法的耦合算法研究[D]. 长沙: 湖南大学, 2012.
[6] 张雄,王天舒. 计算动力学[M].北京:清华大学出版社, 2007.
[7] Johnson G R, Stryk R A, Beissel S R. SPH for high velocity impact computations[J]. Computer Methods in Applied Mechanics Engineering,1996, 139: 347-373.