前混合式磨料水射流磨料粒子加速过程数值模拟

摘要
图/表
参考文献(27)
相关文章 (15)

全文: PDF (1727 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对前混合式磨料射流磨料加速过程运动复杂、实验研究困难及有限元处理超大变形存在网格畸变等问题，基于光滑粒子（SPH）耦合有限元（FEM）方法模拟前混合式磨料射流喷嘴不同阶段磨料粒子加速特征及磨料射流破碎靶体全过程。其中水介质用SPH建模，磨料粒子、喷嘴、靶体等用FEM建模。揭示磨料粒子群在喷嘴中的运动轨迹及喷嘴结构对磨料粒子加速影响规律。研究表明，磨料粒子进入喷嘴收敛段之前已基本达到与水介质相同速度，进入收敛段后因与水介质存在速度差使其获得加速，但与水介质速度差逐渐增大；进入直线段后水介质与磨料粒子一直加速，且水介质速度在直线段末端趋于稳定，在离开喷嘴的短距离范围内水介质速度趋于稳定，磨料粒子在核心段水流作用下继续加速，最终趋于稳定；磨料粒子群在喷嘴收敛段相互碰撞运动剧烈，进入直线段后相对平缓；流量一定下磨料粒子速度随喷嘴收敛段延长而增加，但增加有限；随直线段延长而增加，增加显著。数值模拟结果与相关文献吻合较好。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	林晓东1
	2
	卢义玉1
	2
	汤积仁1
	2
	章文峰1
	2
	程玉刚1
	2

关键词 ：磨料水射流, 磨料, 加速机理, SPH-FEM耦合, 数值模拟

Abstract：For the complexity of the difficulties in experimental research on abrasive particles acceleration process in pre-mixed abrasive water jet（AWJ）and the mesh distortion problem in dealing with large deformation problems with finite element method (FEM), the abrasive particles acceleration characteristics at different stages of nozzle and the process of target body breaking with AWJ are simulated based on the coupling algorithm of smoothed particle hydrodynamics (SPH) and FEM, and the water is simulated by SPH, and the abrasive particles, the nozzle, the target body and so on are simulated by FEM. Combined with the simulated results, abrasive particle swarm trajectories in the nozzle and the impact of changes in the abrasive nozzle on abrasive particles acceleration is analyzed. The results show that, the erosion pit section of the target body is "V" shaped and continue to deepen under the AWJ action. The abrasive particle has substantially reached the same speed as the water before entering the nozzle converging section. After the abrasive particle enters the nozzle convergent section, the abrasive particle is accelerated. However, it is the velocity difference between the water and the abrasive particle gradually widens. After entering the straight segment, the water and the abrasive particle are accelerated all the time, and the water velocity stabilizes at the end of the line segment. Within a short distance from the nozzle, the water velocity stabilizes, and the abrasive particle in the core segment of water flow continues to accelerate, but the abrasive particle velocity eventually stabilizes. Abrasive particles collide violently in the nozzle convergent section, and their movement is relatively flat after entering the nozzle line straight segment. Under constant flow, the abrasive particle velocity increases with the extension of the nozzle convergence section, but the velocity increase is very small. The abrasive particle velocity increases with the extension of the line straight segment, but the velocity increases significantly. On the whole, the results are basically consistent with the relevant results, and it provides a research method for AWJ.

Key words： abrasive water jet abrasive acceleration mechanism SPH-FEM coupling algorithm numerical simulation

收稿日期: 2014-04-04 出版日期: 2015-08-25

引用本文:

林晓东1,2，卢义玉1,2，汤积仁1,2，章文峰1,2，程玉刚1,2 . 前混合式磨料水射流磨料粒子加速过程数值模拟[J]. 振动与冲击, 2015, 34(16): 19-24.
LIN Xiao-dong1,2，LU Yi-yu1,2，TANG Ji-ren1,2，ZHANG Wen-feng1,2，CHENG Yu-gang1,2. Numerical simulation of abrasive particles acceleration process in pre-mixed abrasive water jet. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(16): 19-24.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2015/V34/I16/19

[1] 李晓红,卢义玉,向文英.水射流理论及在矿业工程中的应用[M].重庆:重庆大学出版社,2007.
[2] 牛继磊,李根生,宋剑,等.磨料射流射孔增产技术研究与应用[J].石油钻探技术,2003,31(5):55-57.
NIU Ji-lei, LI Gen-sheng, SONG Jian, et al. Investigation and application of abrasive water jet perforation to enhance oil production[J].Petroleum Drllng Technques,2003,31(5):55-57.
[3] 李根生,沈忠厚.高压水射流理论及其在石油工程中应用研究进展[J].石油勘探与开发,2005,32(1):96-99.
LI Gen-sheng, SHEN Zhong-hou. Adacances in reseach and applications of water jet theory in petroleum engineering[J]. Petrolleum Exploration and Development, 2005, 32(1):96-99.
[4] 沈忠厚.水射流理论和技术[M].北京:石油大学出版社, 1998: 228-252
[5] Kumar N, Shukla M. Finite element analysis of multi-particle impact on erosion in abrasive water jet machining of titanium alloy[J]. Journal of Computer and Applied Mathematics, 2012, 263:4600-4610.
[6] Anwar S, Axinte D A, Becker A A. Finite element modelling of overlapping abrasive water jet milled footprints[J]. Wear, 2013, 303:426-436.
[7] 王明波,王瑞和,陈炜卿.单个磨料颗粒冲击岩石过程的数值模拟研究[J].石油钻探技术,2009,37(5):34-38.
WANG Ming-bo, WANG Rui-he, CHEN Wei-qing. Numerical simulation study of rock breaking mechanism and process under abrasive water jet [J].Petroleum Drilling Techniques, 2009,37(5): 34-38.
[8] 徐依吉,赵红香,孙伟良,等.刚粒冲击岩石破岩效果数值分析[J].中国石油大学学报:自然科学版,2009,33(5):68-71.
XU Yi-ji, ZHAO Hong-xiang, SUN Wei-liang, et al. Numerical analysis on rock breaking effect of steel particles impact rock[J]. Journal of China University of Petroleum,2009,33(5):68-71.
[9] Wangj M, Gao N, Gongw J. Abrasive water-jet machining simulation by coupling smoothed particle hydrodynamics/finite element method[J]. Chinese Journal of Mechanical Engineering, 2010, 23(1):1-6.
[10] 宋祖厂,陈建民,刘丰.基于SPH算法的高压水射流破岩机理数值模拟[J].石油矿场机械, 2009,38(12):39-43.
SONG Zu-chang, CHEN Jian-min, LIU Feng. Numerical simulation for high-pressure water jet breaking rock mechanism based on sph algorithm[J].Oil Field Equipment,2009, 38(12): 39- 43.
[11] 卢义玉,张赛,刘勇,等.脉冲水射流破岩过程中的应力波效应分析[J].重庆大学学报,2012, 35(1):117- 124.
LU Yi-yu, ZHANG Sai, LIU Yong, et al. Analysis on stress wave effect during the process of rock breaking by pulsed jet[J].Journal of Chongqing University, 2012, 35(1): 117-124.
[12] 司鹄,谢延明,杨春和.磨料水射流作用下岩石损伤场的数值模拟[J].岩土力学,2011, 32(3):935-940.
SI Hu, XIE Yan-ming,YANG Chun-he. Numerical simulation of rock damage field under abrasive water jet[J].Rock and Soil Mechanics, 2011, 32(3):935-940.
[13] Nguyen T, Shanmugam d K, Wang J.. Effect of liquid properties on the stability of an abrasive water jet[J]. International Journal of Machine Tools &Manufacture , 2008, 48: 1138-1147.
[14] Liu H, Wanga J, Kelson N, et al. A study of abrasive water jet characteristics by CFD simulation[J]. Journal of Materials Processing Technology, 2004, 153/154: 488-493.
[15] 王明波,王瑞和.喷嘴内固液两相流流场的数值模拟[J].石油大学学报:自然科学版, 2005,29(5):46-49.
WANG Ming-bo,WANG Rui-he.Numerical on fluid-particle two-phase jet flow field in nozzle[J]. Journal of China University of Petroleum, 2005,29(5):46-49.
[16] 杨新乐, 张永利, 陈伟雄. 固液两相射流喷嘴外冲击流场的数值模拟[J].煤矿机械, 2008, 29(8): 52-53.
YANG Xin-le, ZHANG Yong-li, CHEN Wei-xiong. Numerical simulation of outside impact flow-field of Solid-liquid two phase jet nozzle[J]. Coal Mine Machinery, 2008, 29(8): 52-53.
[17] 熊佳,雷玉勇,杨志峰,等. 基于Fluent 的磨料水射流喷嘴内流场的可视化研究[J].润滑与密封, 2008, 23(6):52-55.
XIONG Jia, LEI Yu-yong, YANG Zhi-feng, et al. Visual research of flow field in the nozzle of abrasive water jet based on Fluent[J]. Lubrication Engineering, 2008,23(6): 52-55.
[18] 王建明,余丰,刘飞宏,等.SPH和FEM耦合法模拟磨料水射流中单磨料粒加速过程[J].山东大学:工学版,2011,41(5): 114-120.
WANG Jian-ming, YU Feng, LIU Fei-hong, et al. Numerical simulation of single paticle acceleration process by SPH coupled FEM for abrasive water-jet cutting[J].Journal of Shandong University:Engineering Science, 2011, 41(5):114-120.
[19] 吕东喜,黄燕华,唐永健,等.基于SPH算法的磨粒冲击工件表面过程数值模拟[J].振动与冲击,2013,32(7):169-174.
Lü Dong-xi, HUANG Yan-hua, TANG Yong-jian, et al. Simulating process of abrasive impacting a workpiece surface based on SPH method[J]. Journal of Vibration and Shock,2013,32(7):169-174.
[20] 纪冲,龙源,方向.基于FEM-SPH耦合法的弹丸侵彻钢纤维混凝土数值模拟[J].振动与冲击,2010, 29(7):69-74.
JI Chong, LONGYuan, FANG Xiang.Numerical simulation for projectile penetrating steel fiber reinforced concrete with FEM-SPH coupling alforithm[J]. Journal of Vibration and Shock, 2010, 29(7):69-74.
[21] Ma Li, Bao Rong-hao, Guo Yi-mu. Waterjet penetration simulation by hybrid code of SPH and FEA[J].International Journal of Impact Engineering,2008,35:1035-1042.
[22] 王建明,宫文军,高娜.基于ALE法的磨料水射流加工数值模拟[J].山东大学学报：工学版,2010,40(1):48-52.
WANG Jian-ming, GONG Wen-jun, GAO Na. Numerical simulation for the abrasive water jet machiningbased on the ALE algorithm[J].Journal of Shandong University (Engineering Science), 2010,40(1):48-52.
[23] 铁占绪.磨料射流中磨料粒子的加速机理和运动规律[J].焦作矿业学院学报,1995, 14(4): 39 -42.
TIE Zhan-xu. The acceleration mechanism and movement pattern of the particle in the abrasive water jet[J].Journal of Jiaozuo Mining Institute, 1995,14(4):39 -42.
[24] 崔谟慎,李春卉.前混合式磨料射流喷嘴的基础研究[J].中国安全科学学报,1995, 5(5):138 -145.
CUI Mo-shen, LI Chun-hui. Basic research on premixed abrasive water jet nozzle[J]. China Safety Science Journal, 1995, 5(5):138 -145.
[25] 尤明庆.前混合式磨料射流喷嘴内流动状况的理论研究[J].流体机械,1996,24(12):17 -20.
YOU Ming-qing. Theoretical research on the flow pattern inside the premixed abrasive water jet nozzle [J].Fluid Machinery, 1996, 24(12):17 -20.
[26] 杨国来,李强,陈俊远,等.磨料喷嘴内磨料颗粒加速机理分析[J].机床与液压,2011,39(19):54-57.
YANG Guo-qiang, LI Qiang, CHEN Jun-yuan, et al. The acceleration mechanism analysis of the abrasive in the abrasive water-jet nozzle[J]. Machine Tool and Hydraulics, 2011,39(19):54-57.
[27] 李宝玉,郭楚文,林柏泉.用于安全切割的磨料水射流喷嘴设计理论和方法[J].煤炭学报,2005,30(2):251-254.
LI Bao-yu, GUO Chu-wen, LIN Bo-quan. Theory and method of designing abrasive water-jet nozzle in safety cutting [J]. Journal of China Coal Society, 2005,30(2):251-254.