Abstract：In order to reveal the shock characteristics and the influence of explosion on satellite during the separation process，the explosive cutters of clamp band system in spacecraft are taken as the research object, the three-dimensional finite element model of cut-off process for the explosive cutters is established by use of explicit dynamic software LS-DYNA. The speed and acceleration of shear knife in the process of explosion fracture are analyzed. Here the change of stress and strain and fracture features of typical fracture units on the link is discussed. And the characteristics of the exploding shock loading and structural response characteristics of the cutter are analyzed in different stages. A method of numerical simulation for the fracture process of explosive cutters in spacecraft is provided, which can also be regard as a reference for the simulation and presage of pyrotechnic shock environment in the process of satellite-rocket separation.
刘怀亮，崔德林，阎绍泽. 航天器中爆炸切割器的爆炸断裂及冲击响应分析[J]. 振动与冲击, 2015, 34(18): 177-182.
LIU Huailiang, CUI Delin, YAN Shaoze . Dynamics explosion fracture and shock response analysis of explosive cutters in spacecraft. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(18): 177-182.
[1] NASA-STD-7003A. Pyroshock Testcriteria[S].NASA Technical Standard. Washington, DC, USA, 2011.
[2] Brauer K O. Handbook of Pyrotechnics[M].New York: Chemical Publishing Co. INC, USA,1974.
[3] Shmuel B S， Goldstein S. Numerical simulation of a bolt cutter [C] //34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cleveland, OH, July 1998..
[4] Shmuel B S. Sizing Bolt cutter assemblies for specific applications by hydrocode analysis [C] //36th AIAA/ ASME/SAE/ASEE Joint Propulsion Conference, Huntsville , AL, July 2000.
[5] Shmuel B S. Performance analysis of a normally closed pyrovalve [C]//38th AIAA/ASME/SAE/ASEE Joint Propulsion Conferenceand Exhibit, Indianapolis, IN, July , 2002.
[6] 张建华. 航天产品的爆炸冲击环境技术综述[J]. 导弹与航天运载技术，2005,3:30-36.
ZHANG Jianhua. Pyroshock environment of missiles and launch vehicles[J]. Missles and Space Vehicles, 2005,3:30-36.
[7] 谭雪峰，阎绍泽. 星箭包带式连接结构动力学研究进展[J]. 导弹与航天运载技术，2010,1:1-6.
TAN Xuefeng，YAN Shaoze. Evolution of research on dynamics of clamp band system between satellite and launch vehicle[J]. Missles and Space Vehicles, 2010,1:1-6.
[8] LI Junlan, YAN Shaoze, TAN Xuefeng. Dynamic envelope analysis of clamp-band joint considering pyroshock of satellite separation. [J]. Journal of Spacecraft and Rockets, 2014, 51(5):1390-1400.
[9] QIN Zhaoye, YAN Shzoze, CHU Fulei. Dynamic characteristics of launch vehicle and spacecraft connected by clamp band[J]. Journal of Sound and Vibration, 2011,330(10):2161-2173.
[10] 武新峰，刘观日，雷勇军等. 基于LS-DYNA的包带式星箭连接装置分离过程和冲击响应分析[J]. 振动与冲击，2013，32(24)：174-179
WU Xinfeng, LIU Guanri, LEI Yongjun etal. Separation process and shock response analysis of clamp band systems based on LS-DYNA[J].Journal of Vibration and Shock, 2013，32(24)：174-179
[11] 初文华，张阿漫，时付红，杨文山. SPH-FEM耦合算法在爆炸螺栓解锁分离过程中的应用[J].振动与冲击，2012，31（23）：197-202.
CHU Wenhua, ZHANG Aman, MING Furen, YANG Wenshan. Application of three-dimensional SPH-FEM coupling method in unlocking process of an explosion bolt
[J].Journal of Vibration and Shock, 2012，31（23）：197-202.
[12] CEN Zheng, GAO Ruofei, SHEN Lei. LM-3A Series Launch Vechicle User’s Manual[M]. Beijing: CALT, CGWIC, CLTC, 2011.
[13] 尚晓江，苏建宇，王化锋等. ANSYS/LS-DYNA动力分析方法与工程实例[M].北京：中国水利出版社，2008.
SHANG Xiaojiang, SU Jiangyu, WANG Huafeng. Dynamic Analysis Method and Project of ANSYS/LS-DYNA [M]. Beijing: China Water & Power Press, 2008.
[14] 郝好山，胡仁喜，康士廷等. ANSYS12.0 LS-DYNA非线性有限元分析从入门到精通[M].北京：机械工业出版社，2010.
HAO Haoshan, HU Renxi, KANG Shiting,etal. Nonlinear Finite Element Analysis from Introduction to Proficiency of ANSYS12.0 LS-DYNA[M]. Beijing: China Machine Press, 2010
[15] 金志明. 枪炮内弹道学[M].北京：北京理工大学出版社，2004.
JIN Zhiming. Interior Ballistics of Guns [M]. Beijing: Beijing Institute of Press , 2004.
