Abstract：It is the most important thing to ensure the integrity and safety of transformer when shipped. In this essay, the transformer winding and the equipment with pre-compression are simulated by the nonlinear finite element method. The loss coefficient for this way of pre-compression is analyzed, and the variation law of the safety factor of block is given. Finally, the relations between the changes of pre-compression and safety factors on the transformer under shipped are investigated. The results show that the way and effects of the pre-compression on the large transformer windings can be simulated distinctly by life-death element technique, and the impact effects of transport can be reflected reasonably by dynamic analysis when the large transformer is shipped.
陈健云，岳红原，徐强. 大型变压器器身压紧方式研究及其航运过程中的动力分析[J]. 振动与冲击, 2015, 34(24): 111-116.
Chen Jian-yuan Yue Hong-yuan Xu Qiang . Study on the way of pre-compression of large transformer winding and its dynamic analysis during transport. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(24): 111-116.
[1] 黄幼茹，刘华，陈丽娟．1999～2001年220kV及以上电压级大型变压器运行可靠性指标分析[J]．电力设备，2002，(04):53-62.
HUANG You-ru, LIU Hua, CHEN Li-juan. Analysis of operational reliability index for large transformer with 220kV and above during 1999～2001 [J]. Electrical Equipment, 2002, (04):53-62.
[2] 王梦云，凌愍．大型电力变压器短路事故统计与分析[J]．变压器，1997，(10):12-17.
WANG Meng-yun, LING Min. Statistic and analysis of short circuit accident of large power transformer [J]. Transformer, 1997, (10):12-17.
[3] В.Ю.Γоршунов，张成邦．电力变压器绕组的压紧[J]．变压器，1983，(04):34-38.
В.Ю.Γоршунов, ZHANG Cheng-bang. Pre-compression of power transformer winding [J]. Transformer, 1983, (04):34-38.
[4] 汲胜昌，王世山，李清泉，等．用振动信号分析法监测变压器绕组状况[J]．高电压技术，2002，(04):12-13.
JI Sheng-chang, WANG Shi-shan LI Qing-quan,et al. Monitor the state of transformer winding by the method of vibration signal [J]. High Voltage Engineering, 2002, (04):12-13.
[5] 唐卫民，傅坚，邵宇鹰，等．大型变压器绕组状态振动分析法的试验研究[J]．变压器，2010，(01):25-27.
TANG Wei-min, FU Jian, SHAO Yu-ying,et al. Testing research on vibration analysis of large transformer winding [J]. Transformer, 2010, (01):25-27.
[6] 唐卫民，桂顺生，金之俭．大型变压器振动分析法的试验研究[C]．08全国电工测试技术学术交流会，中国浙江杭州，2008.7.
TANG Wei-min, GUI Shun-sheng, JIN Zhi-jian. Testing research of vibration analysis of large transformer [C].National Electrotechnical Testing Technology Symposium of 2008, Hangzhou, Zhejiang, China, 2008.7.
[7] 谢坡岸，饶柱石，朱子述．大型变压器绕组有限元建模与分析[J]．振动与冲击，2006， (02):134-137.
XIE Po-an, RAO Zhu-shi, ZHU Zhi-shu. Finite element modeling and analysis on transformer windings [J]. Journal of Vibration and Shock, 2006, (02):134-137.
[8] 桂顺生，金之俭，王丰华．轴向预紧力对变压器绕组固有频率的影响[C]．08全国电工测试技术学术交流会，中国浙江杭州，2008.8.
GUI Shun-sheng, JIN Zhi-jian, WANG Feng-hua. Influence of preload to natural frequency of transformer windings [C]. National Electrotechnical Testing Technology Symposium of 2008, Hangzhou, Zhejiang, China, 2008.8.
[9] 李洪奎．大型电力变压器绕组短路强度与稳定性研究[D]．沈阳：沈阳工业大学．2011.
LI Hong-kui. Study of short-circuit strength and stability of windings in large power transformer [D]. Shenyang: Shenyang University of Technology, 2011.
[10] 王承志．大型变压器器身压紧装置结构及工艺[J]．变压器，2006，(08):27-31.
WANG Cheng-zhi. Structure of pre-compression and technology of lage transformer windings [J]. Transformer, 2006, (08):27-31.
[11] 黄贤俊．重大件货物海运受力分析与IMO指南[C]．第五届中国国际救捞论坛，中国辽宁大连，2008.4.
HUANG Jun-da. Stress analysis and IMO guide of heavy goods during ocean shipping [C]. The fifth China International Salvage Forum, Dalian,Liaoning,China, 2008.4.
[12] 魏彧展．海运重大件货物的加固与绑扎[J]．现代商检科技，1996，(03):36-39.
WEI Yu-zhan. Reinforcement and lashing of heavy goods during ocean shipping [J]. Modern Inspection Technology, 1996, (03):36-39.
