预制破片对厚壁圆管的横向高速冲击作用研究

摘要
图/表
参考文献(9)
相关文章 (15)

全文: PDF (1453 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了获得厚壁圆管在横向高速冲击下的响应规律，进行了预制破片冲击圆管试验，得到不同冲击速度作用下圆管的响应模态及侵彻深度，并采用LS-DYNA对整个动态变化过程进行了仿真研究，获得了侵彻过程中预制破片的速度变化规律及圆管壁厚和预制破片长径比对极限穿透速度的影响规律。结果表明侵彻深度与冲击速度线性相关；圆管壁厚在7mm-8mm之间时对圆管极限穿透速度影响最大；预制破片长径比低于1.5时，对圆管极限穿透速度有显著影响，但其影响效果随自身的增大而逐渐削弱，当达到3.5左右时极限穿透速度不再变化。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：厚壁圆管, 预制破片, 高速冲击, 极限穿透速度, 数值仿真

Abstract：To get that the response of the thick-walled pipe under lateral high velocity impact, experimented prefabricate fragment impact circular tube, acpuired the tube's response modes and penetration depth under the impact at different velocities,and studied the dynamic process by simulation using Ls-Dyna,got the change law on the velocity of the prefabricate fragment and relationship between the ultimate velocity and wall thickness or length-diameter ratio.results indicate that there is significant linear correlation between and velocity penetration depth;wall thickness mostly affect ultimate velocity at 7mm-8mm; prefabricate fragment's length-diameter ratio have a significant impact to ultimate velocity under 1.5，but it's effect languishingly along with increase of itself, the ultimate velocity don't change when length-diameter ratio at 3.5.

Key words： thick-walled pipe prefabricate fragment high velocity impact ultimate velocity;numerical simulation

收稿日期: 2015-01-23 出版日期: 2016-02-25

引用本文:

朱桂利，李伟兵，王晓鸣,李文彬. 预制破片对厚壁圆管的横向高速冲击作用研究[J]. 振动与冲击, 2016, 35(5): 115-119.
ZHU Gui-li LI Wei-bing WANG Xiao-ming LI Wen-bin. Prefabricate fragment lateral high velocity impact on the thick-walled pipe. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(5): 115-119.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2016/V35/I5/115

[1]P. K. Jena, N. Jagtap, K. Siva Kumar, et al. Some experimental studies on angle effect in penetration[J]. International Journal of Mechanical Sciences. 2010,37(5):489-501.
[2]Norman Jones, R. S. Birch. Low –velocity impact of pressurized pipelines[J]. International Journal of Impact Engineering. 2010,37(1):207-219.
[3]周丽军,孙奇涵,门长峰,等.自由圆管在横向冲击下载荷下的动力学行为研究[J].天津工程师范学院学报,2005,15(3):15-20.
ZHOU Li-jun,SUN Qi-han,MEN Chang-feng,et al.Research on dynamic behavior of free-free tubes impacted laterally[J].Journal of Tianji University of Technology and Education,2005,15(3):15-20.
[4]路国运, 雷建平. 自由圆柱壳受冲击载荷作用的动力响应仿真分析[C]. 太原理工大学学报,2005,36(6):707-709.
LU Guo-yun,LEI Jian-ping.Numerical simulation of the dynamic response of free-free cylindrical shell under lateral impact[C].Journal of Taiyuan University of Technology,2005,36(6):707-709.
[5]纪冲，龙源，方向，等.钢质圆柱壳在侧向局部冲击荷载下的变形及失效破坏[J]. 振动与冲击,2013,32(15)：121-125.
JI Chong,LONG Yuan,FANG Xiang, et al.Dynamic response and perforation failure of cylindrical shell subjected to lateral local impulsive loading[J].Journal of Vibration and Shock,2013,32(15)：121-125.
[6]秦庆华,程国强,李芙蓉.刚塑性圆管经受侧向撞击时变形与损伤的研究[J].太原理工大学学报,2003,34(1):8-10.
QIN Qing-hua,CHENG Guo-qiang,LI Fu-rong.The deformation and damage survey of rigid-plastic circular tubes under lateral impact[J].Journal of Taiyuan University of Technology,2003,34(1):8-10.
[7]张晓天,贾光辉,黄海,等.基于节点分离Lagrange有限元方法的超高速碰撞碎片云数值模拟[J].爆炸与冲击,2010,30(5):499-504.
ZHANG Xiao-tian,JIA Guang-hui,HUANG Hai.Simulation of hypervelocuty-impact debris clouds using a lagrange FEM with node separation[J].Explosion and Shock Waves,2010,30(5):499-504.
[8]戴向胜, 马建敏. 冲击载荷作用下金属圆柱壳能量吸收研究[J]. 振动与冲击, 2012, 31(6):100-103.
DAI Xiang-sheng,MA Jian-min. Energy absorbed by a metal tube under axial crush load[J].Journal of Vibration and Shock,2012, 31(6):100-103.
[9] 王猛, 黄德武, 曲家惠,等. 钨合金杆式弹侵彻45#钢变形失效行为的数值分析[J]. 塑性工程学报, 2012, 19（2）:102-106.
WANG Meng,HUANG De-wu,QU Jia-hui, et al. Simulation on the deformation and fracture of long-rod projectile of tungsten alloy penetrating into 45# steel[J]. Journal of Plasticity Engineering, 2012, 19（2）:102-106.
9