In order to evaluate the influence of different experimental variables on the racking performance of sheathing sandwiched wood shear walls, one monotonic test and seven reversed cyclic tests were carried out. Four typical experimental variables were considered, including wall length, stud spacing, sheathing thickness and nails spacing. The performance was evaluated and compared in terms of shear strength, lateral stiffness, ultimate displacement, stiffness degradation and energy dissipation. The results showed that the tensile fracture of end stud which appeared at the top of hold-down was the finial damage pattern of sheathing sandwiched wood shear walls. The sheathing thickness which determined the failure modes of nail connections on the edge frame had significant effects on the lateral stiffness and ultimate displacement of the walls. Appropriate decrease in nail spacing could increase the shear strength and lateral stiffness of the walls, but the nail spacing should be larger than 75/150 mm to avoid the splitting of top plate and bottom plate. Sheathing sandwiched shear walls exhibit excellent racking performance and can be applied in mid-rise timber buildings.
郑维,陆伟东,刘伟庆,刘杏杏. 夹板木剪力墙的抗侧力性能试验[J]. 振动与冲击, 2016, 35(19): 94-100.
ZHENG Wei, LU Wei-dong, LIU Wei-qing, LIU Xing-xing. Racking performance of sheathing sandwiched wood shear walls. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(19): 94-100.
[1] 谢启芳, 吕西林, 熊海贝. 轻型木结构房屋的结构特点与改进[J]. 建筑结构学报, 2010, 31(S2): 350-354.
XIE Qi-fang, LU Xi-lin, XIONG Hai-bei. Structural characteristics and improvement of lightwood-frame houses [J]. Journal of Building Structures, 2010, 31(S2): 350-354.
[2] 程海江. 轻型木结构房屋抗震性能研究[D]. 上海: 同济大学土木工程学院, 2007: 50-53.
CHENG Hai-jing. Study on seismic behavior of light wood-frame house [D]. Shanghai, Department of Civil Engineering, Tongji University, 2007: 50-53.
[3] 刘雁, 卢文胜, 吕西林, 等. 不同上部刚度对木框架剪力墙受力性能影响的试验研究[J]. 土木工程学报, 2008, 41(11): 63-70.
LIU Yan, LU Wen-sheng, LU Xi-lin, et al. Effect of variable upper stiffness on the performance of wood shear walls [J]. China Civil Engineering Journal, 2008, 41(11): 63-70.
[4] 祝恩淳, 陈志勇, 陈永康, 等. 轻型木结构剪力墙抗侧力性能试验与有限元分析[J]. 哈尔滨工业大学学报, 2010, 42(10): 1548-154.
ZHU En-chun, CHEN Zhi-yong, CHEN Yong-kang, et al. Testing and FE modeling of lateral resistance of shear walls in light wood frame structures [J]. Journal of Harbin Institute of Technology, 2010, 42(10): 1548-1554.
[5] 康佳华, 熊海贝, 吕西林. 轻型木结构房屋足尺模型低周反复加载试验研究[J]. 土木工程学报, 2010, 43(11): 71-78.
KANG Jia-hua, XIONG Hai-bei, LU Xi-lin, et al. Cyclic tests of full-scale wood-framed constructions [J]. China Civil Engineering Journal, 2010, 43(11): 71-78.
[6] 郑维, 陆伟东, 刘杏杏. 胶合木框架剪力墙抗侧力性能试验研究[J]. 地震工程与工程振动, 2014, 34(2): 104-112.
ZHENG Wei, LU Wei-dong, LIU Xing-xing. Experimental study on lateral load resistance of glulam frame-shear wall structure [J]. Earthquake Engineering and Engineering Dynamics, 2014, 34(2): 104-112.
[7] 陈松来, 樊承谋, 王焕定. 轻型木结构剪力墙和楼盖的抗侧刚度研究[J]. 中山大学学报(自然科学版), 2011, 50(4): 42-49.
CHEN Song-lai, FAN Chen-gmou, WANG Huan-ding. Experimental Study on Lateral Stiffness of Wood Shear Walls and Diaphragms [J]. Acta Scientiarum Naturalium Universitatis Sunyatseni, 2011, 50(4): 42-49.
[8] VAROGLU E, STIEMER SF. Wood wall structure: USA, U.S. Patent 5782054 [P]. 1998-07-21.
[9] KARACABEYLI E, NI C, STIEMER SF, et al. MIDPLY wall system [R]. Vancouver, BC: Forintek Canada Corp., 2000.
[10] VAROGLU E, KARACABEYLI E, STIEMER SF, et al. Midply wood shear wall system: Concept and performance in static and cyclic testing [J]. Journal of Structural Engineering, 2006, 132(9): 1417-1425.
[11] VAROGLU E, KARACABEYLI E, STIEMER SF, et al. Midply wood shear wall system: performance in dynamic testing [J]. Journal of Structural Engineering, 2007, 133(7): 1035-1042.
[12] NI C, FOLLESA M, POPOVSKI M, et al. Assessment of seismic design parameters for Midply wood shear wall system [C] // Proceedings of the 10th World Conference on Timber Engineering. Miyazaki, 2008.
[13] PEI S, VAN DE LINDT JW, Ni C, et al. Experimental seismic behavior of a five-story double-Midply wood shear wall in a full scale building [J]. Canadian Journal of Civil Engineering, 2010, 37(9): 1261-1269.
[14] ISO—16670. Timber structures—Joints made with mechanical fasteners—Quasi-static reversed-cyclic test method [S]. International Organization for Standardization (ISO), Geneva, Switzerland; 2003.
[15] ASTM E564-06. Standard test methods for cyclic (reversed) load test for shear resistance of vertical element of the lateral force resisting systems for buildings [S]. America Society of Testing and Material (ASTM), West Conshohocken, Pa.; 2012.
[16] BUITELAAR M. Static and Dynamic Testing of the MidplyTM Shear Wall System [D]. Department of Civil Engineering, University of British Columbia, 2001: 105-129.
[17] 中华人民共和国建设部. GB 5005 – 2003木结构设计规范[S]. 北京:中国建筑工业出版社, 2005.
[18] Canadian Standards Association (CSA). 086-01 Engineering Design in Wood [S]. Toronto, Canada: Canadian Standards Association, 2005.
[19] 何敏娟, 周楠楠. 不同覆面材料木剪力墙抗侧性能试验研究[J]. 同济大学学报(自然科学版), 2011, 39(3): 340-345.
HE Min-juan, ZHOU Nan-nan. Experimental Study on Racking Performance of Light-frame Shear Walls with Various Sheathing Materials [J]. Journal of Tongji University (Natural Science), 2011, 39(3): 340-345.
[20] JGJ 101-1996. 建筑试验方法规程[S]. 北京: 中国标准出版社, 1997.