Analysis Influence of Synchronization Process of Synchronizer on the Dynamic Characteristic of Transmission
He Jingliang1, 2, Ren Zhonglun1, Qin Longquan1, Chen Yong1, 2
1. Beijing Information Science and Technology University, Beijing100192；
2. Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing100192
In order to improve shifting quality of synchronous phase of the truck transmission and dynamic characteristic, loading status and system deformation caused by elastic deformation of each components was considered under the actual working condition of the transmission. The transmission dynamic analysis model was built, based on the theory of multi body dynamics. The relative parameters which affected dynamic characteristic of transmission on the basis of model, and improvement measures of dynamic characteristic of transmission was put forward. The results showed that shifting quality and dynamic characteristics of transmission was improved, and provide reference for the future transmission dynamics research.
贺敬良1,2，任忠伦1，秦龙泉1，陈勇1,2，林慕义1,2. 同步器同步过程对变速器动力学特性的影响分析[J]. 振动与冲击, 2017, 36(14): 239-244.
He Jingliang1, 2, Ren Zhonglun1, Qin Longquan1, Chen Yong1, 2. Analysis Influence of Synchronization Process of Synchronizer on the Dynamic Characteristic of Transmission. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(14): 239-244.
[1] 李波,常思勤,林树森.一种新型增力式同步器设计[J].中国机械工程,2013,24(17):2301-2305.
LI Bo, CHANG Si-qin, LIN Shu-sen. Design of a novel servo synchronizer [J]. China Mechanical Engineering, 2013, 24(17): 2301-2305.
[2] 王建宇.新型双锥面式同步器的研制[D].哈尔滨:哈尔滨理工大学,2005.
[3] 陈震,钟再敏,章桐. 基于ADAMS的同步器同步过程仿真分析[J].汽车工程,2011,33(4):340-344.
CHEN Zhen, ZHONG Zai-min, ZHANG Tong. Simulation Analysis on the Synchronizing Process of Synchronizer Based on ADAMS [J]. Automobile Engineering, 2011, 33(4): 340-344.
[4]杜秀菊,崔清斌,王兴贵.某履带车辆同步器建模与工作过程仿真[J].机械传动,2006,30(2):42-46.
Du Xiu-ju, CUI Qing-bin, WANG Xing-gui. Model Building and Working Process Simulation of Synchronizer in One Caterpillar [J]. Journal of Mechanical Transmission, 2006, 30(2): 42-46.
[5] 陈玉祥,臧孟炎,陈勇等.基于虚拟样机技术的手动变速器换挡力分析[J].中国机械工程,2006,23(8):996-1000.
CHEN Yu-xiang, ZANG Meng-yan, CHEN Yong etal. Shift force analysis of manual transmission based on virtual prototyping technology [J]. China Mechanical Engineering, 2006, 23(8): 996-1000.
[6] 王顺利,凌晨,席军强.同步器同步过程摩擦因数变化试验及仿真研究[J].汽车技术,2002,07:32-34+45.
WANG Shun-li, LING Chen, XI Jun-qiang. Test and Simulation Study on Friction Coefficient during Synchronizing Process of synchronizer [J]. Automotive Technology, 2002, 07: 32-34+45.
[7] 《汽车工程师手册》编辑委员会.汽车工程师手册/设计篇.北京:人民交通出版社,2001.
[8] 林腾蛟,李润方,杨成云等.增速箱内部动态激励及系统振动响应数值仿真[J].农业机械学报,2002,06:20-22+15.
LIN Teng-jiao, LI Run-fang, YANG Cheng-yun etal. Numerical Simulation for Inner Dynamic Excitation and System Vibration Response of Speed Increasing Gearbox [J]. Transactions of the Chinese Society for Agricultural Machinery, 2002, 06: 20-22+15.
[9] 李润方,王建军.齿轮系统动力学[M].北京:科学出版社,1997.
[10] 吉林工业大学汽车教研室.汽车设计[M].北京:机械工业出版社,1981.
[11] 温建民,李瑰贤,李笑等.非渐开线变厚齿轮修形方法的研究[J].哈尔滨工程大学学报,2003,6(24):660-663.
WEN Jian-min, LI Gui-xian, LI Xiao etal. Study of tooth modification of noninvolute beveloid gears [J]. Journal of Harbin Engineering University, 2003, 6(24): 660-663.
